So helpful. My 2004 SID was bucking and sticking and just not working anymore. I removed it from the bike, followed this video step by step, put it back on, and voila! rides like new again. Cannot thank you enough.
Это не ремонт и даже не восстановление. Это полный разбор для очередного хорошего обслуживания! Приятно! Смотрел как ЛёхаПсков восстанавливал, вытачивал запчасти, делал какие-то подгоны и выдумки. А здесь чисто разбор, замена бушингов и обратная сборка с заменой всех смазочных. Всё кратко и понятно!
Да, но для того чтобы самому это сделать надо инструмента специального какое-то немыслимое количество, поэтому дешевле и проще наверное отдать в мастерскую, хотя это всё равно дорого будет или оставить так. Я тоже думал свой ROCKSHOX правда простой, пружинно-масляный с регулировкой жёсткости механической перебрать, потому что он полуживой. Но боюсь если разбор и то не факт, пройдёт успешно, если ничего не свернётся, то сборка обратно может не произойти. Вообще любой ремонт дома это морока та ещё ввиду отсутствия тех же интрументов, помимо навыков. Одно отсутствие треноги\стойки для ремонта и обслуживания велосипеда даже замену какой то мелочи от настройки скоростей до замены каких то запчастей и других настроек превращается в пытку на карячках с постоянной ловлей велика и желанием иметь ещё пары рук.
@@Dmitriy1992ful Придумывает народ истории. Разводной ключ, шестигранник, насос , тряпки и масло. Полчаса времени. Работает безотказно , уже 20 лет))).
I thought I was the only one still riding one of these forks. I have the 'World Cup' model from 2004 I think with Sid 99 lowers. It is on a titanium hardtail with 26" WH-M965 XTRwheels. Running XTR 965 dual control groupset from around 2003-4. Bike weighs around 21.5 or 22lbs. I love the fork--VERY smooth riding set on 80mm travel. And I have managed to ride some very gnarly terrain with that setup, The fork is 20 years old, and still works great.I bought a Sid 'team' for a friend at the same time when I had a dealer account, and his is also still in use. I am about to service my fork--just waiting for an oil mixing syringe from Amazon to do the pure damper side. I will use this video to help with the job as I have not done it it in 2-3 years. Thanks for the upload.
8:16 IFP(internal floating piston) have to be placed on the end of rod with the pocketed side down. then IFP will be seated 6inch depth easily. thanks for your video 라고 쓰고 보니 한국인이시군요..ㅎㅎ 참고하시길.. 앗.. 그리고 분해 시 공기압 배출은 왼쪽하단의 음극부터 빼는 것이 국룰입니다..:)
Hello--the Sid I am working on is a different model. I believe it is a 'World cup Carbon' with 'slippery silver' stanchions, and carbon crown/steer tube.The only service guide I found online is titled 'Sid 2003-2004 Service Guide'. The document is more confusing than anything, as it covers 3-4 forks with differing internals. I have done oil change and cleaning on the fork before, but not not for quite a while.Upon reassembly I have an o-ring left over. However I am unsure where it fell out from. It fell out while I was disassembling and I'm not sure from where. I am mainly wondering if there is an o-ring in the bottom of either one of the lower legs>. Thanks for any help.
I am also riding a Sid World cup fork from 2004. With regualar service, and used as intended these old forks last forever. Can still be found occasionally on Ebay.
I just did this on a Sid World Cup from early 2000s. The PDF I found was for about 4 different models of Sids--very confusing. All kinds of complex part names for stuff that wasn't even in my fork. Guide I found was 2003-2004 Sid Service Guide.Closest I could to the fork I have. Some older PDFs have been removed from the Sram archive.
![[FULL EP.73] เปิดบ้าน 70 ล้าน "แป้ง Zbing" ยกมาทั้งญี่ปุ่น l เคหสถานบานปลาย l One Playground](http://i.ytimg.com/vi/YBnJhTt07Pg/mqdefault.jpg)
So helpful. My 2004 SID was bucking and sticking and just not working anymore. I removed it from the bike, followed this video step by step, put it back on, and voila! rides like new again. Cannot thank you enough.
Это не ремонт и даже не восстановление. Это полный разбор для очередного хорошего обслуживания! Приятно! Смотрел как ЛёхаПсков восстанавливал, вытачивал запчасти, делал какие-то подгоны и выдумки. А здесь чисто разбор, замена бушингов и обратная сборка с заменой всех смазочных. Всё кратко и понятно!
Да, но для того чтобы самому это сделать надо инструмента специального какое-то немыслимое количество, поэтому дешевле и проще наверное отдать в мастерскую, хотя это всё равно дорого будет или оставить так. Я тоже думал свой ROCKSHOX правда простой, пружинно-масляный с регулировкой жёсткости механической перебрать, потому что он полуживой. Но боюсь если разбор и то не факт, пройдёт успешно, если ничего не свернётся, то сборка обратно может не произойти. Вообще любой ремонт дома это морока та ещё ввиду отсутствия тех же интрументов, помимо навыков. Одно отсутствие треноги\стойки для ремонта и обслуживания велосипеда даже замену какой то мелочи от настройки скоростей до замены каких то запчастей и других настроек превращается в пытку на карячках с постоянной ловлей велика и желанием иметь ещё пары рук.
@@vseslav4361, не буду спорить, ибо согласен, на переборку не то что вилки, но и в целом вела нужны спец инструменты, коих не у всех есть!
@@Dmitriy1992ful Придумывает народ истории. Разводной ключ, шестигранник, насос , тряпки и масло. Полчаса времени. Работает безотказно , уже 20 лет))).
You should really think about listing the types of tools/ grease fluids used for your videos. Most of us are mechanics/diyers and are interested
I thought I was the only one still riding one of these forks. I have the 'World Cup' model from 2004 I think with Sid 99 lowers. It is on a titanium hardtail with 26" WH-M965 XTRwheels. Running XTR 965 dual control groupset from around 2003-4. Bike weighs around 21.5 or 22lbs. I love the fork--VERY smooth riding set on 80mm travel. And I have managed to ride some very gnarly terrain with that setup, The fork is 20 years old, and still works great.I bought a Sid 'team' for a friend at the same time when I had a dealer account, and his is also still in use. I am about to service my fork--just waiting for an oil mixing syringe from Amazon to do the pure damper side. I will use this video to help with the job as I have not done it it in 2-3 years. Thanks for the upload.
I've got 5 sets of sids lol
8:16 IFP(internal floating piston) have to be placed on the end of rod with the pocketed side down. then IFP will be seated 6inch depth easily.
thanks for your video 라고 쓰고 보니 한국인이시군요..ㅎㅎ 참고하시길..
앗.. 그리고 분해 시 공기압 배출은 왼쪽하단의 음극부터 빼는 것이 국룰입니다..:)
The guy did it correctly, according to the manual.
Wow~
잘봤습니다^^
샥도 분해정비가 가능하시군요ㅎㅎ
신기하게도 저도 같은 04년식의 sid team fork가 있습니다. 분해시 참고하겠습니다^^
씰링킷과 더스트씰은 어디서 구매하셨는지 알 수 있을까요?
알리에서 대체품을 살려고 하는데 조금 불안하네요ㅠㅠ
Hola.
Donde has encontrado el kit de juntas??
Producto descatalogado, no lo eocuentro por ninguna parte!!!
Hello--the Sid I am working on is a different model. I believe it is a 'World cup Carbon' with 'slippery silver' stanchions, and carbon crown/steer tube.The only service guide I found online is titled 'Sid 2003-2004 Service Guide'. The document is more confusing than anything, as it covers 3-4 forks with differing internals. I have done oil change and cleaning on the fork before, but not not for quite a while.Upon reassembly I have an o-ring left over. However I am unsure where it fell out from. It fell out while I was disassembling and I'm not sure from where. I am mainly wondering if there is an o-ring in the bottom of either one of the lower legs>. Thanks for any help.
2004 rockshox fork waw!! here my last years cassette and suspension fork are hardly ever lasting. Damn how this thing lasted from 2004.
I am also riding a Sid World cup fork from 2004. With regualar service, and used as intended these old forks last forever. Can still be found occasionally on Ebay.
Show, passo a passo, ótimo vídeo
What grease do you use before installing the grey dust seals @ minute 4:01.
Hello, could you please share the ebay link?, I have a 2001 RockShox Sid Dual air fork I want to service with new parts
I did this myself years ago... I wish I would have had this video... the PDF is terrible
I just did this on a Sid World Cup from early 2000s. The PDF I found was for about 4 different models of Sids--very confusing. All kinds of complex part names for stuff that wasn't even in my fork. Guide I found was 2003-2004 Sid Service Guide.Closest I could to the fork I have. Some older PDFs have been removed from the Sram archive.
What is the stuff called that you were spraying?
Juice Lube, Fork Juice
정비료는 얼마나 하는지요?
오우 추억의 쑈바
Siuuuuuu
мм
😻 P r o m o S M.
Hi mate what is glue name please I am Trying to find that fork seal glue what's the name please thanks?
It’s not glue, it’s grease for the seals. Will most likely be sram butter/ slickoleum.
Cc