That hole is there to help with vacuum loading issue, I did the same thing and started to notice in inconsistencies of fps and priming you feel the bubble of air holding the bolt from closing.
That's a terrible implementation and solution to vacuum loading. You lose all the plunger tube volume behind the hole because only the area ahead is compressed air volume. A small hole in the bolt head would have done just as well.
I'm very interested in this blaster, I'm tempted to review one. I do not like the proprietary mag so I may end up purchasing the adapter. Great review as always!
This Blaster is Super Powerful!! I've pushed my clear one(Complete with Metal Internals, Thicker PU Padding and damper Spring on the Plunger) past 430FPS with a 2mmx18mmx265mm Spring inside... the full 305mm was just impossible to put inside. It's a manly prime, but it'll do it.
Yup I have a 550mm Worker and a custom Threaded 650mm and a 700mm on it's way @@aaronfleisher4694 Worker kinda get decapitated over 380...GOS still seem to hold up to my limit.
just a heads up, I've been using a Baize as my primary for about a year now and the mag adaptor I got from OOD did not quite work. caused feeding issues so I ended up going back to the proprietary mags. But it runs well at 300 fps with a good scar
for me, it was just a little to low so darts would be folded and stuffed into the breach causing jams. its possible that was fixed in later version though? I did get a very early model and it lacks many of the features you have here. Both mag adaptor and the blaster @@CaptainXavier
Oh, Dears. Nice to see some extra wildlife instead of hearing "TRAIN!". Maybe bring a Nerf Dog Tennis Ball Launcher to the range and some fruit in the future so you can lob apples or w/e :P I was in Washington visiting friends last week and spotted some eyes watching me from over a fence as I came in from a junk food run. Turns out Bothell has stuff besides rabbits, deer, and coyotes... namely a rather large Bobcat!
Oh captain my captain i have a question/request. if i give you a nerf maverick or if could find one LOL. how much would it cost for me to watch you on here to do your worst to it and by that i mean your best to bring it back to life and useable in the now??
I have at least 2 bins full of mavericks, you don't need to send me one. I have a plan...but you are not going to like it...but it might give you a chuckle...
@@CaptainXavier please tell me I mean I don't care if you make it funny which will probably make it even better it could be even very tactful cuz my son loves attachments
@stevenwilliamson5687 Did you, though? Cuz, I answered that question in the video at 10:24. ;P (I ramble a lot. It is easy to miss a single throw-away line)
The sound that the barrel makes when it scrapes against the shroud sounds like hangers dragging against the metal racks in Value Village.
VV FTW
2:48 RUN BAMBI RUN!!!
That hole is there to help with vacuum loading issue, I did the same thing and started to notice in inconsistencies of fps and priming you feel the bubble of air holding the bolt from closing.
That's a terrible implementation and solution to vacuum loading. You lose all the plunger tube volume behind the hole because only the area ahead is compressed air volume. A small hole in the bolt head would have done just as well.
I'm very interested in this blaster, I'm tempted to review one. I do not like the proprietary mag so I may end up purchasing the adapter. Great review as always!
This Blaster is Super Powerful!! I've pushed my clear one(Complete with Metal Internals, Thicker PU Padding and damper Spring on the Plunger) past 430FPS with a 2mmx18mmx265mm Spring inside... the full 305mm was just impossible to put inside. It's a manly prime, but it'll do it.
Yup I have a 550mm Worker and a custom Threaded 650mm and a 700mm on it's way
@@aaronfleisher4694 Worker kinda get decapitated over 380...GOS still seem to hold up to my limit.
This is the revised model. I had not yet seen it in Orange.
"Oh look deer."
"Hm, looky there dinner is coming to me, how considerate of them "
there were 2 deer, if swamp cat could would she chase them?
There were actually 4. The other 2 were camera shy. And not only would she, she does.
just a heads up,
I've been using a Baize as my primary for about a year now and the mag adaptor I got from OOD did not quite work. caused feeding issues so I ended up going back to the proprietary mags. But it runs well at 300 fps with a good scar
Interesting. I am not using the OOD one. At least I don't think I am. I got mine from Frontline Foam. It seems to work but I have not used it a lot.
for me, it was just a little to low so darts would be folded and stuffed into the breach causing jams. its possible that was fixed in later version though? I did get a very early model and it lacks many of the features you have here. Both mag adaptor and the blaster @@CaptainXavier
Excellent blaster! Bangarang!
What upgrade spring was that? Would love to get that from amazon or aliexpress
As I said in the video, I think it was a Harrier upgrade spring. You now have all the information I have to give. ;)
What spring is that? because my harrier springs don’t work with my baize v2.5
@University_Cornell I have no idea. I thought it was a Harrier spring but I have no idea if it is or where it came from.
@@CaptainXavier lol ok thanks
Metal internals?
Oh, Dears. Nice to see some extra wildlife instead of hearing "TRAIN!". Maybe bring a Nerf Dog Tennis Ball Launcher to the range and some fruit in the future so you can lob apples or w/e :P
I was in Washington visiting friends last week and spotted some eyes watching me from over a fence as I came in from a junk food run. Turns out Bothell has stuff besides rabbits, deer, and coyotes... namely a rather large Bobcat!
There is plenty of wildlife here. Deer, opossums, coyotes, I even heard (but did not see, thank goodness) a wild boar.
The ultimate question. Can it take a K26?
My dude...I answer that in the video...
Oh captain my captain i have a question/request. if i give you a nerf maverick or if could find one LOL. how much would it cost for me to watch you on here to do your worst to it and by that i mean your best to bring it back to life and useable in the now??
I have at least 2 bins full of mavericks, you don't need to send me one. I have a plan...but you are not going to like it...but it might give you a chuckle...
@@CaptainXavier please tell me I mean I don't care if you make it funny which will probably make it even better it could be even very tactful cuz my son loves attachments
Are you going to do can it take a k26
...did you even bother to watch the video? 10:24
@@CaptainXavier yes I did
@stevenwilliamson5687 Did you, though? Cuz, I answered that question in the video at 10:24. ;P (I ramble a lot. It is easy to miss a single throw-away line)
What type of scar barrels does it work with?
Also does it work with bcars?
It will work with any scar/pcar/bcar that fits the same barrel size as Worker scars. The barrel shroud is optional.
i checked with the x shot barrel and it works@@CaptainXavier
Okey Track
Aww man. I didn't see the deer where was it?
around 2:48 in, look at where the orange tip of the blaster is
@@sillsilesil thanks
those deer dont give a crap
Schoen Roads
When the next Lego video
300 bucks?
Hard pass.
I got mine for 160
Make it full auto somehow
Was really hoping you'd do a test shot on the deer 😆
Even if I was that much of a terrible person, I couldn't. The net is in the way. :P
Did the Deer Have a Little Dough ?