The NEW down draft DUST COLLECTOR table- Built from a old solid wood desk.
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- I show how I built my New Dust collector table using an old wood desk I paid $20 for.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
etsy.me/2Usrss6
/ carving_fusion
#dustcollection #dustcollector #carvingwood #carvingfusion #CARVINGFUSION
Awesome Jordy! Love the new “Thunderdome”🤣😉
“Jordy just gets sh_t done!” That’s right! Awesome set up. It’s doesn’t get any better than that! Thanks for tips.
Right on!
The fan at the top should be blowing down so the airflow into the downdraft is channeled in one direction. With it blowing up the air is more chaotic and the dust could circulate inside the area for a while. You have air going in two directions which will decrease the effectiveness of both.
Thanks , Can I call ya “JJ” !? Hey 👋 , You’ve Given Me & Everyone Else , All these Great Ideas !!! People used to call me”Scooter”Cause I ran so fast !
Yup u can call me jj , lol ty too
Love that last draw. I have one just like it.
Great job! Keep on keeping on. You are so kind. Thanks for all your sharing.
Nice! Somebody has definitely been busy!
Love it. We're making one in the new year. Have a shop vac and dust collector to start. Just need a cyclone and pail.
Looks nice Jordy. I would like to build the same thing. I like it. 👍
Looks great Jordy, I'm jealous...wish I had a place indoors that I can carve it would be a whole lot easier than setting up and taking everything back down after carving before nightfall. Maybe run a small tube from the dust collector to the small fan on top to get all the dust?
Wow Jordy! That is amazing! I sure would love that! I just finished my first wood spirit yesterday and realize how much I need that set up! Hoping hubby will build me one😊 he built me a suction table but now I want it enclosed!
Clean and we'll organized . Great set up Jordy awesome .
Thanks Mr glen
Awesome more carving videos 🎉carry on carry on stay safe just carve 😊
That looks great, can't wait to see it get dirty 😜
Good hear that enthusiasm...
Have a Jordy Christmas and
Happy 2023.
Cheers
Bring on the new videos Jordy.
Great Table Jordy.... well thought out
Great set up Jordy!
Hell yeah, can’t wait to see you use it and see how it works
Awesome table Jordy
Nice set up, thanks for giving me some ideas to fix my set up. Take care
You planned that out nicely,
New table has had some very nice improvements ,certainly the model we all can resort to.
Your never mind draw looks good haha looks good Jordy some good ideas thanks enjoy low cost helps👍👍
I'm learning some good stuff tonight! Thanks!
Well done jordy what a fantastic idea everything is contained inside , It will be easier to keep tidy . 😀
Aaah yes! Seems like yesterday we said goodbye to the ol’girl😢 she brought us countless masterpieces and so much knowledge! Will always love her just like are first carving. But we knew Jordy Johnson, would birth the new and improved custom Mad Carver Cave 2.0( aka. MCC) We All sit here in anticipation waiting for all of the new Masterpiece’s!! Carry on Jordy Carry on!!!
Lol thank you
That’s a wicked setup you have there 👍
Very nice 📦 👍
Heck yeah Jordy!!!! Woot woot !!
Rock on!
I think you done a great job on your table….
Awesome repurposed project!!! Built for a carving Pro. I have also built my dust collection system and most all of my shop work station to help me eat less dust and be more efficient. Great tips from your build….thanks.
:)
Very nice setup 👍🏻
wicked set up Jordy well worth the investment. cant wait to see the videos you will create in this cool place
🖤🤘Thats a creation station n half ! Im defo gonna nick some of your upgrades for my table Im really liking the addition of the top fan 💪 thats an awesome idea brother & the light bar too. Im defo liking whats in that draw too 😜.
Love it! Nice work Jordy! "Nevermind that drawer..." 😆
😁
I like it, my sort of little workshop.
Very nice set up jordy
I like your table .I been thinking about changing my work shop to accomadate my new carving hobby. Great idea Thank you jordy. Jim's wood shop
yes sir looks awesome!! i bet the sides will help control that cottonwood bark dust for sure! and plenty of storage room for all your bits an burs!! love it... the added fan to the top is a great idea.. cant wait to watch all the cool creations that come from it!!!! Stay warm an safe!!
great table now i know how to build one, thanks
Ahhh...desks were designed to work at..now yours can meet your demands...
Looks great Jordy !...
🌿🌿🌿
Thanks pam
Cool.
thats a awesome setup thks for showing it Jordy
Dang Jordy you thought of everything on this project. VERY COOL👍🏼
That's a nice setup, it looks like you put a lot of thought on to it
Thanks scott
New carving table is looking sweet!!! Wonder what you'll carve first at it? Bet it's not a flower...LOL!!!
Lol I'll know tmrw
Wonderful !, Great setup. Nice and practical.
I love it.... can't wait to reinvent my table in the garage this Spring. My new station inside isn't real practical because I have other people who live there but it's good for small projects... hope you are well!
looks great Jordy
Nice , simple set up !. Gives inspiration too build one .
Awesome dude great job and good call on the dremmel on the outside. I noticed on my steep the breeze from it blows dust away from suction so wall to be added now 💪🤙
Very well thought out! 👍🏽
Excellent idea
The carving table is frinking awesome I'm proper jealous it's not just a table more like a carving station 🤘🤘👍😁
Absolutely ❤️ awesome Job,looks great, everything u do my friend is freaking awesome 👌🏻 ty so much for sharing 😀 🥰🤗
Ty
Looks like a solid setup.
Thanks you
Congratulations on your new setup. Doesn't have to be perfect. Just do it!
Awesome! Thanks for sharing. Got a few ideas for improving my area.
Love your new carving downdraft station. Looks like you got everything covered. Now go make some sawdust.
Nice set up jordy. Happy carving. And MERRY CHRISTMAS.
Thank you and you as well
sweet !!!!!
Awesome setup!!
Hey Jordy... thanks for sharing your very cool set-up. I love it and it looks like a very comfy spot to hang out. Fran
the timing for this video is perfect Jordy, I have been thinking of some ideas for my own Dremel carving station. you have some really good ideas I am going to "borrow " from your design.
Thanks again for the inspiration. you rock Jordy.
Very cool looking carving table bet there’s going to be some awesome things coming out of there 👍🏼🇦🇺
Nice Jordy. I wish had a room that I could dedicate to carving like you have. Winter I have to do knives and gouge stuff then when it warms up I Dremel carve outside. Great job on table and collector. Be well
Glad you gotér all fix up . looks great ? Now let the carving begain ?
Love the table Jordy. Still gotta build mine, for now I just have the attachment layed by carving spot and everything is pulled out onto the ground, away from me. I carve outside on the porch. Love all your videos, its a big help
Thank you
Nice set up Jordy! Now! I'm thinking of building one myself!!!!
I'm so happy for you Jordy, hello from Central Texas. I enjoy your videos so very much. You have helped me to become a better Carver as I've never used a Dremel before. Thank you again so very much. Merry Christmas and happy New Year and may it be a very good one for you in spite of all of the drama with politics. Much love and a hug from Central Texas.
Thank you and you too
Looks great! Nice job Jordy
Hey Jordy. It's been a long time since I last commented. New carving table looks awesome. I'm sure you're going to use it well. Best of the season to you. Take care buddy. Rick.
Hey Rick yes it's been a long time, good to hear from you and I hope you have been well. And thank you
Nice job buddy 👍🏽looks awesome!! For now 😂
Lol ahah
I should receive my cylcone in 2 days, however, another shop-vac to buy, so excited to install everything! Inspired by you, thank you Jordy!
:)
Looking good buddy 👍🏼
Thanks 👍
Thanks for sharing this Jordy some great improvements to your carving table. Hope your good brother 🤘
Thanks 👍
Jordy, thanks for making your vids. I just started Dremel carving and your videos have helped me out a lot. Best wishes to you and yours.
:) you too
Drawer #4 🤣😍🤣🤩
Lol
Oh. Nice setup by the way. Have a good xmas.
I had the Dust Deputy and was producing static electricity which resulted in burning out two of my shop vacs.
And how did you fix that
I didn't fix it as I had to abandoned the Cyclone.
@@CarvingFusion I didn't fix as I had to abandon the collector. Two vacuums gone bad by using this system convinced me to stop throwing good money away.
🌻
Love it, I have to do even my small carvings outside but I have cover. Can I have your email address, I want to send you a picture of some of my work. The Doctors say I have an incurable lung disease but because of you and your videos I am going to make the best use of my time while I can.God bless you Jordy and your family.
I like those solid wood drawers and the rabbit dado joint for the drawer face what is there any joinery on the sides
Great carving table, like the computer fan. Please, how did you wire it up?
Ty it came with a plug
@CarvingFusionByJordyJohnson lol, not really 😂 what I wanted to ask, I am no election, I have a few old computers with the fans, and I'm not sure if they would take 240 volts plugged into them. But it's still a fantastic idea 💡 I will work on it.
well done Jordy - question for you what size vacuum hose goes too and from your cyclone.
4 inch
thanks Jordy Ive been looking for a cyclone like this so I can hook up my planer to, just cant find one like yours.
have you ever used one of those generic chinese flex shafts?
Yup they are junk
I am using a 5 HP vacuum for my dust collection when carving however my vacuums are burning out after about a year or less. I clean the filter when dust accumulates to a degree. The motor does not burn out because it overheats and when they burn out the vacuum is not much more than lukewarm. I do not have the vacuum running for more than 90 minutes at one time.
Any ideas on what is going on?
No clue but I would suggest trying to get one of those vacuums that are in the gardge and piping go threwout the house, I forget the name of them.
Actually I purchase the Rezaire Dust Collector today. They appear to be very effective in collecting the very fine dust@@CarvingFusion
Wow you’ve really had a great job done there Jordy. I suppose you spent that much time carving last winter thinking how to improve things and make everything more accessible. You’ll have to put your prices up to pay for everything. So looking forward to seeing more fantastic creations this winter. I’m still slogging away with chainsaw but weather is making things tough. I’m re doing my workshop this winter and your tips will help enormously. 🪵
Very nicely done 👍