Review of CET fire pump for farm or home

Selecting a high pressure fire pump. Wildland fire pump. Two stage water pump. Forestry Monroe Oregon. IPT, Enduraplas, Davey, Endurance, Wick, Waterax, Mercedes, CET Fire-Pump, C. E. T. Manufacturing, CET fire pumps, trailer mount, skid unit, farm and tool

[@smallarmsspecialties53]

Mr. Palmer, your video inspired me to assemble my own water trailer. I chose the same pump, installed at the rear of a King Kutter trailer.
I used a 275 gallon IBC, some Banjo Wye Strainer, Cam & Groove fittings, Ferguson ball valves, suction hose and other fittings from McMaster, 1-1/2” fire hose and reel from Rawhide, and a Cox Reel with 100’ of 3/4” hose.
Full of water, the trailer will weigh roughly 3,500 lbs. I’ll use a Heavy Hitch with ball mount to tow with my LX2610. Fingers crossed, I hope to fill it up and try it out before July 4.

[@gregpalmer9949]

Great, I think you are right to want to have it ready by July 4. I have mine reassembled (after winter) and full of water but I have not gassed her up and run it so far. I wonder if there is a way to add a picture to a comment, my Cox Reel arrived after I made the video.

[@kensakamoto258]

As a wildland firefighter I think your pump choice is excellent. Most small pumps fall way short of 20 gpm at 110psi. That performance is needed to effectively cool a fire and penetrate into the material.

[@gregpalmer9949]

Thanks for watching and commenting. Luckily I have not been able to use it on a fire, but it works very well watering trees also (at a fast idle and diverting much of the water back into the tank).

[@tdm8817]

Thanks for the video
I am waiting to get one of these and glad to hear some feedback on one

[@gregpalmer9949]

Have you taken delivery? What sort of system did you put together?

[@floydyoung7329]

From a firefighter very intelligent ideas and your video was a pleasure to watch.

[@gregpalmer9949]

Thanks. I talked to my nephews (2) who are firefighters when designing the system