I used "MABUCHI RE-280" motor (Supply voltage is 3V max) Thanks, P.S I added more information for you,that ... The "RE-280motor" has some variations,So I chose a high speed type. Thanks.
Hi , If the diameter of wheel is 90mm ... Then , perimeter of wheel will be 0.09 * 3.14 ---> 0.28m.. 7000 rpm * 0.28 * 60 min = Wow ! 117.6km / h !! That enough may be I think ..
@@palmdreams6249 now I use 11000rpm motor. Wheel diameter 68mm. Wheel width 26mm. High friction wheel rubber type. From my calculation, I got 141km/h for this
hi Palm, what kinds of motor are you using for shooting ball?
I used "MABUCHI RE-280" motor (Supply voltage is 3V max)
Thanks,
P.S
I added more information for you,that ...
The "RE-280motor" has some variations,So I chose a high speed type.
Thanks.
Your mabuchi rpm about 7000++ rpm. I only can find motor about 9000 rpm - 12000 rpm. Do you think it can use?
Hi , If the diameter of wheel is 90mm ...
Then , perimeter of wheel will be 0.09 * 3.14 ---> 0.28m..
7000 rpm * 0.28 * 60 min = Wow ! 117.6km / h !!
That enough may be I think ..
Hi, 9000rpm motor is not so good I think..
Torque is not enough when Quick shooting with different speed.(High low speed mixing)
@@palmdreams6249 now I use 11000rpm motor. Wheel diameter 68mm. Wheel width 26mm. High friction wheel rubber type. From my calculation, I got 141km/h for this
Good day admin, how many degree between each wheel ? Is it 120 degree?
Yes, 120 degree
こちらの商品は今現在も販売中なのでしょうか？
予定数量に達し、保守部品を頒布中です。
現在 自動サーキュレーション機能付きの第二弾を画策中です。
Where did you get these wheels ?
That wheel was 3d printed too.
Thanks,