CZ Shadow 2 Orange - Spring upgrade
ฝัง
- เผยแพร่เมื่อ 2 มี.ค. 2021
- Ultimate - Eric Grouffel
Recoil Spring - 11lbs
Hammer Spring - 10lbs
Firing pin spring
www.ericgrauffelonlineshop.com
www.benstoegerproshop.com
Music:
Onycs - Together
Download:
www.toneden.io/onycs/post/tog...
#teampinoyzshooterz #kablitshooters #uspsa #shadow2 #lokgrips - กีฬา
I'm looking at getting shadow 2 orange..it's sad that they don't put theses springs in at factory especially since the $$price is high.
Yeah I agree
I shoot Mine with the spring kit from the factory It does come with the longer set also But mine feeds anything i try 50 gr. to 147 gr. The Orange is more accurate than i am. The Trigger i will leave alone My Staccido and the cz are as close as possible 2.8-9 Both Pistols . I Bought a very nice Shoulder Holster from Italy , and is is the easiest one i have to put on i have several , It is as Sturdy as The one i have for my Glock 20 From Alask. These expensive Firearms will ruin you when you shoot a striker fired like a Glock or Sig .
do you know the original weight for the 3 sets spring came with the orange? factory installed the shortest set of recoil spring and hammer spring
Sorry. No idea 😀
Hey, quick question. So, what is your input on this kit with the 11lbs recoil spring and 12lbs main spring? I do not have access to reloading ammo and shoot factory ammo.
I have exact spring that you have in your video..is it match w/ every spring that you replace?or the recoil and trigger pull get better?thanks…
What rds you shoot with the 11lb spring? I had a total of 3 FTFs using S&B and Winchester NATO 124g in a match. Granted both are stout rds and have more kick than others. Also chewed up my buffer.
I shoot 147 grains with 3.2 titegroup powder.
@@AlphaCharlieProduction copy that. Figured full powered factory rds were a factor haha. Fairly new to spring tuning.
@@AlphaCharlieProductionwow i shoot 147 grain. I’m just deciding to give the shadow 2 a chance. I did the full Cajun pro kit so i went with the 11.5lb hammer spring and i thought that was low. I’m sure it will run the outdoor dynamic 147s no problem. The 10lb recoil spring didn’t give u any issues with the 147 grain? How about 124 grain as well? No reach reduction kit?
@@PracticalPostMan_FLA 11lb recoil spring no problem with the 147 and my 10lb hammer spring hammer spring but some light strike on rifle primers
have you try Ultimate - Eric Grouffel
Recoil Spring - 8lbs
Hammer Spring - 8lbs
extended Firing pin spring , sear spring?????
Not yet. Let me know the result if you’re doing it. Thanx!
Hi, this setup which balls do you use it with?
How many grains?
Thank you
I used factory ammo FMJ 115, 124, 147 grains works great. I like the 124 more
@@AlphaCharlieProduction OK. I use the 147 gr. Do you think it will be good or do you have something to advise me?
@@fabiomastrogiovanni4763
with 147grains they shot fine less flip, tight groupings. For me, I shoot USPSA 124grains is snappier, quicker recoil
@@AlphaCharlieProduction OK thanks. I should try with: Recoil Spring - 9 lbs
Hammer Spring - 10lbs
I was wondering did you have to change the firing pin to an extended one later on?
I’m still using the stock firing pin.
Awesome. Thank you for replying.
Is it 12lbs or 10lbs hammer spring?it says in your description its 10 lbs but in your video its 12lbs.which is which?thanks!!!
I’m going to change my spring setup to Eric Grauffel setup. I’ll post the video.
hello! great video... the slide is smoother?
Yes 👍😎🤘
How could you do a video for a spring upgrade and not even have a trigger pull gauge?
I planned on buying one but I found myself using it all but one time. So I figured I didn’t need it so I didn’t buy it. 😀
What was the resulting trigger pull weight with the upgrade?
Hi! I don’t have trigger pull gauge but It felt a big deference it’s like more than half of the original pull.
SAY SOMETHING DAMNIT. Doesnt do us brand new CZ owners a bit of good.
Sorry bro can’t do it ✌️😀✌️. What do you need to know?
is 8lb recoil spring better than 10?
I haven’t tried it. I think you need extended firing pin for the 8lbs spring
oh i meant the recoil spring
Is that 10 lbs or 12 lbs main spring?
10lbs main spring
Sir ilang pounds na lang DA trigger after po?
Wala akong gauge pero laki deference sir parang more than half ang na Wala
@@AlphaCharlieProduction ayos na sir nagpakabit ako sa speededge hehe. From 9.5 to 5.8-6lbs yung DA natin. SA from 3.5 to 2.5. 0.4 slack to 0.2 disconnector. Ayw sa .0 masyado makapal sabi gunsmith hehe
Ayos sir thank you Sa info 🤘😎🤘
@@proshotshootingacademy6604 sir, ilang lbs ung knabit mo a main spring?
10lbs sir. 11lbs recoil spring.
I can’t hear a single word you said 😂
Ssshhhhh 🤫