As a drywaller for 15 years. Kids take note to how he handles that pressure with his index finger on the blade. 2 fingers for a 10-14” blade. This will help your feathering skills.
For all you geniuses, it wasn’t 2 screws he missed the stud so he dimpled the paper in to fill it so it’s not protruding. Nothing wrong with it. Also you can see he already coated the butt joints and the screws that are up by the top and bottom of the panels. Swear to god you TH-cam commenters need to stay away from the lead products your all way to angry all the time and probably couldn’t throw a stone at half the shit you comment on
Notice how he doesn't pull the knife off the wall as he's changing direction. No little mud nibs left behind. The wall stays cleaner and requires less sanding in the end.
You do that motion on the joints to apply the compound, you just covered two screws and put all that paste on the board,just remember the more paste you use the more you have to sandpaper
@@CbrF4i600cc no, some workers think it's easier and faster when covering the screws do the down and up motion covering the whole board where the screws are leaving a trail of compound instead of just putting the little bit of compound on each screw,for me I do that screw by screw its lets messy and when time to sandpaper is less work less hustle
@@EVLS10 lmfao tell me you dont know shit about drywall without telling me you dont know ahit about drywall. mud shrinks. if youre only putting on 1 coat then youre doing a dogshit job
I love when the entire comments section goes into full detail on something so simple… It really doesn’t take all that much skill guys… people work basic labor contracting and act like heaven sent carpenters
Facts. Lol😂 "you guys are artists, masters, awesome, can do way better then I could, i hate the mudding part...... What do you mean you cant finish my basement for a 100 bucks? Its only going to take you 5 days when it would take me 5 months..."😂
Cual es la razón para estirar tanto la pasta son solo 2 ollos no tiene sentido Y lo digo con razón yo soy maestro eso es perdida de material y tiempo Malo malo el trabajo
Three in the feild and sometimes 4 on outside insulated walls.Two screws proves you are just in a hurry and don't care if they pop. Put whatever it takes to completely secure the rock and drive them through the rock, don't blast them through the rock to the stud or truss. I hang and finish all my jobs and also paint alot of them so I make sure everyone is happy.
@@christianlemus6487 Bullhonky.Sometimes the glue doesn't even touch the stud or truss. Especially around vents and metal buckets.Studs aren't perfect either.Ueah,you put one screw around here in hurricane country and you'll be run off the job.Stick with mobile homes.Just another copout.Stupid? I just fixed stupid. You're welcome.
@@christianlemus6487 You mean you can get away with one.I hang it, finish it,sand it, texture it and paint it so I'm gonna keep doing it how I have been for 44 years and that way I know it's done right. Do you put one on the end of each board? Screw it off right and you don't need glue, stupid.Putting on the trusses gets all over stuff.Glue is for girls fake fingernails. Do they call you Elmore Glue?
They're not even properly covered🤦♂️ Might as well not do that at all. Just makes more work for the painter that comes in behind you that has to sand that whole strip you just left and re-fill the holes
Every American drywall video I’ve seen they all run a big line virtually to cover two screws, Just do the two screws instead of trying to look fancy, Less is best, You won’t get a job doing it like that in Australia, we only cover one inch of the screw
I'm a journeyman drywall this is how 90% of people do. Usually not done on the first coat of screws. It takes three coats of mud on the screws. If you use quick set mud you can get away with 2 coats. First coat i just cover the screws with the corner of my knife next two coats are done like this. Its faster and when your sanding you can hit all the screws and one motion going up and down. Instead of having to pick up the sanding pole and set it on each of the screw holes.
Looks cool, only problem with that is because once it dries, it becomes a hole again to have to refill. You literally have to glide the tapping knife and not scrape..
![[TH]FFWS SEA Spring 2024 Final](http://i.ytimg.com/vi/TK2mu-8yBFU/mqdefault.jpg)
As a drywaller for 15 years. Kids take note to how he handles that pressure with his index finger on the blade. 2 fingers for a 10-14” blade. This will help your feathering skills.
For all you geniuses, it wasn’t 2 screws he missed the stud so he dimpled the paper in to fill it so it’s not protruding. Nothing wrong with it. Also you can see he already coated the butt joints and the screws that are up by the top and bottom of the panels. Swear to god you TH-cam commenters need to stay away from the lead products your all way to angry all the time and probably couldn’t throw a stone at half the shit you comment on
Your last 35 words are golden.
@@anthonydavid6642 amen brother, monkey see but monkey can’t do👍🏼
Shitting excellence. Nice work.
When the screws are pushed in instead of turned they pop later.
Are you slow them joints are bare tape not coated and it’s a couple screws my kids can do it faster
Finally!! A job that I can apply to and say I’ve never messed it up!! Filling holes is what I do! 😅😅😅😅
🤣🤣🤣🤣
Notice how he doesn't pull the knife off the wall as he's changing direction. No little mud nibs left behind. The wall stays cleaner and requires less sanding in the end.
Finally someone slows down the procedure
For real 😊. I've been trying to work on that mud spread. That was a movie worthy slow down. 😄
Don't worry, he will have to do the job twice when shrinkage kicks in
That’s a nice knife.
This guy knows what he's doing
Good video !!! Keep learning
Pure skill 😮
Real plastering is a skill
Nice, I would have ripped all the paper off with the corner of the trowel.
Very good👍👍👍
Same technique i use..
Good job
That's why i have knuckles the size of baceball mits... hate spotting nails, ...24 years I have been doing that
You do that motion on the joints to apply the compound, you just covered two screws and put all that paste on the board,just remember the more paste you use the more you have to sandpaper
U mean he did it the right way?
@@CbrF4i600cc no, some workers think it's easier and faster when covering the screws do the down and up motion covering the whole board where the screws are leaving a trail of compound instead of just putting the little bit of compound on each screw,for me I do that screw by screw its lets messy and when time to sandpaper is less work less hustle
Art
Can clearly see those screws
Thats what multiple coats are for moron
@@drew3590 You only need multiple coats for screws if you are a moron.
@@EVLS10 lmfao tell me you dont know shit about drywall without telling me you dont know ahit about drywall. mud shrinks. if youre only putting on 1 coat then youre doing a dogshit job
I love when the entire comments section goes into full detail on something so simple…
It really doesn’t take all that much skill guys… people work basic labor contracting and act like heaven sent carpenters
Try lay a good brick 😂😂
Walking to the left is faster than most people that side step
Juanito you are learning
Nobody will do their own sheetrock and taping but they want me to do it for nothing. 😅😂
Facts. Lol😂 "you guys are artists, masters, awesome, can do way better then I could, i hate the mudding part......
What do you mean you cant finish my basement for a 100 bucks? Its only going to take you 5 days when it would take me 5 months..."😂
All that effort for 4 screws it helps when it's brace element not centers
It's just filling
Why another hole?
Smooth 😎
Do a triple
Aparecen igual los hoyos
Wow what skill😅
Why make a line for two pinholes?
Idk, just to waste time
No, it actually leaves less build up, lots of pros do this @UltraGamma25
It’s faster than doing each screw individually, try doing thousands of screws in a new home
Надо всю стену измазать чтоб не заметно было
Wow, you do work. Congrats
Alaaannn. Why you gotta be like that? 😂
Cual es la razón para estirar tanto la pasta son solo 2 ollos no tiene sentido
Y lo digo con razón yo soy maestro eso es perdida de material y tiempo
Malo malo el trabajo
Все американцы делают именно так
Gracias
Hole for roundness?
Grasshopper you are learning
Your not supposed to break the paper with the screws it looses its strength.
It’s still going to suck in when the mud drys and is going to need a 2nd coat
Obviously lmfao whats even the point of commenting this, do you feel smart?
@@drew3590 nope just thinking 🤔 you know something I didn’t
Still need a second run 🤣
Those glory holes were way to big. 😢
Neve see these dudes rubbing the shit down...
Вау как круто, я круче ничего не видел
You never get it 1st time
Eso es de heat-star, aprende ya de universida compa tapando tornillitos!!
You dug it out the joint cause your knife too perpendicular.. gonna need another pass
Three in the feild and sometimes 4 on outside insulated walls.Two screws proves you are just in a hurry and don't care if they pop. Put whatever it takes to completely secure the rock and drive them through the rock, don't blast them through the rock to the stud or truss. I hang and finish all my jobs and also paint alot of them so I make sure everyone is happy.
Ml
Stupid, when you use glue on the studs you only need one screw in the middle
@@christianlemus6487 Bullhonky.Sometimes the glue doesn't even touch the stud or truss. Especially around vents and metal buckets.Studs aren't perfect either.Ueah,you put one screw around here in hurricane country and you'll be run off the job.Stick with mobile homes.Just another copout.Stupid? I just fixed stupid. You're welcome.
@@christianlemus6487 You mean you can get away with one.I hang it, finish it,sand it, texture it and paint it so I'm gonna keep doing it how I have been for 44 years and that way I know it's done right. Do you put one on the end of each board? Screw it off right and you don't need glue, stupid.Putting on the trusses gets all over stuff.Glue is for girls fake fingernails. Do they call you Elmore Glue?
👍
4" or 6" knife?
Looks like a 6
Все так могут.
Smoothe
good jop 👍
😊👍🤝
Clean job but keep me away from that dirty ass knife, ALWAYS keep your putty knife and hawk/mud tray clean
Ой прям такой мастер)))мастер дырочки замазывать)))
Esos agujeros..se chuparan..Se tendrá que hacer de nuevo ..ko ..Si no tiene un poco de yeso..ok
howwwwwwwwwww😮
They're not even properly covered🤦♂️ Might as well not do that at all. Just makes more work for the painter that comes in behind you that has to sand that whole strip you just left and re-fill the holes
Хотел я такой шпатель, оказалось эта отвёртка очень сильно мешает, упирается в руку в запястье... 👎
Lift between screws
no
Do yourself a favor and don't comment anymore
Took to much putty of the wall when it tries its going to sink in and you’ll have to redo it
Tell me you know nothing about drywall...... by commenting on a drywall video. 😊
Just your words alone tell us you don't know how to spackle
That's what we all do
No lifting of the knife.... try to get some fool that "has 15 years experience..." to understand that is like pulling teeth from a turnip.
Drywall guy of 27 years get some sleep bro
Столько шпатлëвки размазывать и снимать ради двух точек, так себе профессор или это я что то не понимаю.
Couldn't you just mud the screws and not the wall in-between screws
If you want to work slower, yes
I would have cut out instead of dimple. Hack
Wtf??
Every American drywall video I’ve seen they all run a big line virtually to cover two screws,
Just do the two screws instead of trying to look fancy,
Less is best,
You won’t get a job doing it like that in Australia, we only cover one inch of the screw
I'm a journeyman drywall this is how 90% of people do. Usually not done on the first coat of screws. It takes three coats of mud on the screws. If you use quick set mud you can get away with 2 coats. First coat i just cover the screws with the corner of my knife next two coats are done like this. Its faster and when your sanding you can hit all the screws and one motion going up and down. Instead of having to pick up the sanding pole and set it on each of the screw holes.
Who the hell puts 2 screws in the center...fire them
When you use glue you are supposed to use only one screw in the middle
@Mateochills what state is that..
Naja.. Noch bissle üben, dann bleiben die Schraubenlöcher auch zu nachm schleifen
😄😄😄😄😄😄🤦
😂😂😂😂
Shrinkage
Step back
It’s not that hard
Wtf
Bubbles on those screws. Needs to be done again...
Этого не достаточно
Could still see the holes!
hey buba how much for new guy,20 dollars ,to much
Use glue...
Обязательно эти сопли тянуть а ляпами не замазать? 🤣
Honestly, Hispanics are better at doing these jobs.
😂😂😂👎👎👎👎👎👎👎
Kijanka odmówiła współpracy?
Looks cool, only problem with that is because once it dries, it becomes a hole again to have to refill. You literally have to glide the tapping knife and not scrape..
I believe you just because you're Mexican
@@tyronejackson4350 hella racist but ok. Still shit work. Btw I'm Guatemalan.. if you don't know about mud shrinking when set the you're the Mexicant.
It's easier to sand than to have to refill. Any auto body man that knows about dye coating would agree, Bondo does the same shit you dumb fuck.