I always really enjoy watching Adam unbox things. You can feel his excitement and it is infectious. You can always tell when he is blown away by whatever he is unboxing when he says "Duuuuuddde" which he doesn't say in this video.
the fact that he was able to grab 2 x AA batteries in under 6 seconds must be commended on the systems of organization he has in his shop . nice work Adam
@@shawnrains4047 seconded. Paint goes a long way. And if yer feeling fancy, disassemble the pieces and have the clamshells electroplated then weather them.
for a one day build (probably series of them) is reamake that base for one of your hero props to a fairly real looking part and have a small wooden rod to hold it. I won't light up but would look fantastic and would help make your hero versions of this prop shine
Am I the only one seeing a 'One Day Build' of the Tanis model within the map room. That was another part of the magic of that prop. Such a unique way of revealing the location.
Its always been funny to me that whether Harrison Ford was playing Rick Deckard, Indiana Jones, Han Solo, or Jack Ryan it didnt matter I always have thought of those characters as the same basic person which is Harrison Ford's actually personality. So when you mixed up Deckard and Jones it made me chuckle.
Kind of the same thing with Tom Cruise. No matter his character I always just see Tom Cruise. For some reason it's the exact opposite with Tom Hanks, that guy just becomes every character he plays.
Really when you think about it Han and Indy are the exact same person just in a different situation. They think the same, they act the same, they think religion is a bunch of BS until its thrown in their faces lol
You should take a look at the one Disney sells at the parks and their online store! It's $75, and I always thought it looked pretty dang good, but would like to hear your thoughts on it.
The staff is that length because this is from an alternate version of the movie where Toht burned his hand on the opposite side of the medallion. He got the staff length even more wrong because he only knew about the one kadam taken back
Take the open one apart, try grinding down the plastic where able, repaint. Send Hasbro an 'I'm disappointed in you' letter with a photo of what they should have done.
I always go back 30/40 years when handling these things and marvel at yes something 70-80% of the way there realisim wise. Back then the hunks of plastic, if you got them at all were more imagination cues than any attempt at prop replication. I for one welcome these MUCH cheaper options - those elite metal castings aren't going anywhere if you want and can afford them, but for some sweet nostalgia on a budget Hasbro et al are doing amazing things in the last few years if you ask me.
At Karnak Temple they have a scale model of the complex in the interpretive center. When I saw it, all I could think was, "Somebody get me the Staff of Ra!"
Adam, I bought one on Amazon as soon as 2:34 on this video. I bought this for my eldest son's 39th birthday. The magic I just experienced is I have a rarely used credit card that had exactly enough points to get this for free! You are The Wizard!
My very first prop replica of any kind, being in Indy fanatic, was RedFour's headpiece. He was from California, and worked in metals for a business. His was cast in bronze with a Swarovski crystal in the center of it. I got one of his back in 2003. Maybe your bronze one is his? He maybe still around, perhaps on the RPF? I just got two of the Hasbro one's as well. For $50 or so, it's nice!
I'm thinking it should actually be possible to remake the base into a larger one, make the staff longer into it's correct size while letting the wiring run through it, and finally; weather the plastic replica to look better. That would create a pretty good looking correct size staff that could light up when placed in the right hole
while it'd certainly be non trivial work, it wouldn't be particularly complicated to replicate the design of the plastic medallion (with the lightpipe and clamshell design and whatnot) except using metal for the outer pieces. you'd be able to slim down the medallion slightly due to higher strength of metal v. plastic, and it'd have a much better weight as well.
Adam, Since you keep a stock of batteries. May I advise you to get Energizer ultimate lithium batteries. They come in all the standard sizes and have a 10-20 guaranteed shelf life. Since I discovered them I have invested in a large stock of every batterie size I regularly need. So I have 24 AA and AAA 8 9V and 12 CR2032, and as soon as I use half of them, I refill them as well as rotate the older batteries to be used next. I haven't grabbed a single dead or leaking batteries in the 3+ years since I did that. I have used exclusively lithium batteries since they became commonly available to protect my devices from leaking batteries. I couldn't tell you how many items I have seen destroyed by leaking batteries over the years.
I love Adam Savage going all in with Indiana Jones and Blade Runner. Considering, I love those the most, but Adam teaches me new things about it every time! As for everything he talks about! Love this man
When you are recreating a prop, how do you judge, for yourself, what looks good with your mark 1 eyeball verses how it may look on film with lighting a possible filters, which version do you go for?
I’m a fan of the Indiana Jones films and I got into the franchise and I enjoyed the Mythbusters episodes on Indiana Jones and the Blade Runner video on the gun and seeing the props from 2049
One of my favorite eps of MacGyver growing up was the one that did a staff thing like Indiana Jones. That looks, so cool. And because of my psoriasis back in the day cleaning my computer was like the map room scene XD. But that is a really, really cool toy.
Adam, awesome work your doing. There is a little treasure I've been trying to reproduce It's the Egyptian money that was never used in Raiders of the Lost Ark but can only find one side to the note..2 stories behind it...Sallah either gave a few 50 cent notes to Indy and Marion before going to the market and or this money was supposed to be thrown in air to act as a distraction...any help in this quest would be well appreciated.
I have like 6kg of old bronze coins (all of them really worn-out so there's not any numismatic value in them) and I would love to cast my own Ra's staff headpiece. Do you recomend any specific method to make the mold? I found a couple 3d printable versions that look pretty good.
now you've got to do a one day build where you modify the piece to look more accurate while retaining the light up mechanic. If you could put the light hardware into the end of a full length staff with a switch on the tip, you could walk around in costume and set the staff down anywhere and get it to light up, would be cool.
I have two headpiece replicas myself. One is Acme Artifacts' magnificent gold(ish) plated version, and the Disney version sold in the Parks. Both of mine have red crystals. I know they are amber on screen, but the spot of light in the Map Room was red, and that's the one that stuck with me as a kid. I've been contemplating this light up version. But I don't know if I'm thrilled about the text lighting up.
Time to make a bronze one that lights up. Use a real rock for the base and the correct staff length. Would make a awesome piece to have in the corner of the office
Now that you have seen how it lights up it would be cool to make one in metal with perhaps a glass core. It would be especially cool to have a laser pointer shine through the jewel.
Indiana Jones movies (specifically the original 3) are my all time favorite movies of all time! The only thing that’s comparable is the Star Wars trilogy ( original 3) that are great as well!
What it REALLY needs is a red/orange laser diode in the stone that projects a beam onto the floor, but only if you use the correct hole in the base. And a staff that is 6 (-1) kadam tall. And a full 3D model of Tanis.
mod the hasbro version by putting a laser pointing up inside the staff pole, a hole in the bottom of the medallion for the laser path up to the crystal, and then an angled mirror inside the crystal to send the beam out and angled slightly downward.
I wonder if you also have the cup of Christ from The Last Crusade? I've seen many plastic versions of it, also the licensed ceramic version, but never an actual wood version with gold leaf. I would actually be surprised if you don't have one 😂 If you do, did you make it yourself?
@@DecanFrost and if you watched the video he posted about the diary, you’d know that he goes on record as saying that Raiders is the only movie in the franchise he even acknowledges which is why he calls it Raiders and not Indiana Jones 🤷🏻♂️
It's not a stunning replica by any means, however if it's a toy aimed towards a younger generation who may just now be learning about Indiana Jones, I'm all for it. I've got 3 young nephews, I'm sure they'd love this thing once they're old enough to watch Indy. Hopefully a little older than I was, I think I was like 8 the first time I saw Temple of Doom and was traumatized by Mola Ram yoinking that dudes living heart 😆
Sorry to correct you, but Emily Lloyd's dad was Roger Lloyd-Pack, who played Trigger in Only Fools and Horses. Toht, the character you are referring to, was played by Ronald Lacey, his daughter being Rebecca Lacey.
I doubt it. Most of them are not very good quality. Private replica makers have made much better. I’m my opinion the only one he’d probably recommend is the crystal skull. For the price, and the light up feature? It’s a good deal. It’s undersized but by far the most affordable for that prop. There are very few skull replicas out there and the others are all a grand or up. He’d probably refrain from bad talking Disney or Hasbro on these channels, since that’s not very smart for business or freebies! Lol. But if you know his passion for accuracy and quality, it’s easy to have a good idea where his opinion would land. Doesn’t mean there is anything wrong with the Disney stuff. Everyone has a budget and with some weathering a lot of the items will look fantastic to any Indy fan. Unless you want to drop thousands on a nice Indy collection, they are more than good enough.
The next step would be to have a motion detector in it, or solar charging. Or having a laser pointer shoot out the front when light hits the back! Complete with dramatic music.
I have a metal version of the Headpiece. It’s claimed to have been cast from an original. The sculpting is not the cleanest (I was seriously thinking of sculpting my own,) but I heard that there were copies given out as gifts when the film came out. Could it have been cast from one of those?
It’s possible. It could also have been cast from a casting, or a casting of a casting, and so on. Headpiece lineage gets fuzzy quick on account of such widespread replication, and unfortunately, some pieces that have been used as the basis for replicas, featured prominently in the media, and even auctioned have been decidedly inconclusive when it comes to actual evidence for their provenance given the iconic nature of the prop. Some collectors are also more lax than others in what counts as “original” (lumping in crew gifts, pieces made by the same craftsperson using the same or similar techniques as souvenirs, etc.), and the defensive desire to believe that you’ve got the real deal is a difficult force to overcome despite lacking proof. If you search “Jason DeBord” and “Staff of Ra,” you should find a 2009 article that delves into some of these issues. Suffice it to say that while there’s a decent chance that your piece is some number of generations away from either an original (used / intended for use during production), a crew gift, or a craftsperson souvenir, I would suggest taking any assurance as to the source category or the specific number of generations with a healthy grain of salt.
Their mistake was making it in 3 parts. It should've been a 1:1 cast of a movie one in the clear material they used for the light pipe, and simply apply a metal coating on top, with the letters and gem sockets masked, this would've been closer to the real one, as is,... kinda phoned in, considering we used to get some pretty sick light pipe toys back in the day... toys that were dice sized, like the small cars that would light up if pressed down or the various die cast metal guns with light effects that were made in the same fashion. Surprised Hasbro isn't able to at least match that.
There's no such thing as 'phoned in', the fact they even bothered to make one AT ALL, is an enormous unnecessary effort. Typical toxic fanboy nonsense. Unlike Adam who can appreciate it for what it is because he actually has the knowledge/experience.
It would take me 45 minutes of looking and probably a trip to the hardware store to find a screwdriver and you practically materialized one out of thin air in a nanosecond.
Last I checked, their pieces were on loan from the Lucasfilm Archives, so that would be up to them. I think there are decent replicas out there, though.
Adam's face desperately trying not to betray his utter disappointment when he opened the medallion is priceless.
Meine Enttäuschung ist unermesslich und mein Tag ist ruiniert.
Reminds me of Norm “reviewing” the hilariously overpriced and altogether useless hand-cranked disk sander.
..... after handling the REAL one, it would be hard to impress anyway.
To quote Adam from the AT-AT I boxing, "Sometimes it is a never ceasing lesson in disappointment."
@@aserta (I hope this translates correctly) I couldn't agree more.
I always really enjoy watching Adam unbox things. You can feel his excitement and it is infectious. You can always tell when he is blown away by whatever he is unboxing when he says "Duuuuuddde" which he doesn't say in this video.
You almost have enough staff of Ra headpieces to be able to recreate the grail scene where they have to pick the one true grail!
picks the wrong one and dies on camera
@@Cristopher.C but Adam would choose wisely 🙂
Adam denies the existence of all the movies besides Raiders, so he won't get the reference 😢
Now I really want to see a one day build where Adam recreates this "toy" in brass and full height staff. Somehow retaining the light piping effect.
Could manage it with thin colored Polycarbonate, or orange glass, too.
that'd be sick, I'd be bummed if Adam didn't give this a shot
agree - he could silicone mold his favorite one, expand it a bit to allow the poly carbon interior, and even 3D print in metal and translucent poly
the fact that he was able to grab 2 x AA batteries in under 6 seconds must be commended on the systems of organization he has in his shop . nice work Adam
There's a cut
The RELICMAKER headpiece was cast from my production used headpiece. You’re welcome. 😊
I'd love to see you take that plastic medallion apart and cast bronze replacements for the outer shell! How cool would that be?
You could just keep it simple and give it a proper paint job and a wash, the thing would look a million times better
@@shawnrains4047 seconded. Paint goes a long way. And if yer feeling fancy, disassemble the pieces and have the clamshells electroplated then weather them.
"If you're Jonesing for one": I understood that reference
I searched for thos comment 😅
for a one day build (probably series of them) is reamake that base for one of your hero props to a fairly real looking part and have a small wooden rod to hold it. I won't light up but would look fantastic and would help make your hero versions of this prop shine
Am I the only one seeing a 'One Day Build' of the Tanis model within the map room. That was another part of the magic of that prop. Such a unique way of revealing the location.
Its always been funny to me that whether Harrison Ford was playing Rick Deckard, Indiana Jones, Han Solo, or Jack Ryan it didnt matter I always have thought of those characters as the same basic person which is Harrison Ford's actually personality. So when you mixed up Deckard and Jones it made me chuckle.
Need a handsome but gruff and rugged slightly shady everyman for your 80s action movie?
Harrison Ford.
Kind of the same thing with Tom Cruise. No matter his character I always just see Tom Cruise.
For some reason it's the exact opposite with Tom Hanks, that guy just becomes every character he plays.
Tom Cruise is the same way, he just plays the same character. However, he casts himself AWESOMELY and it workks.
Really when you think about it Han and Indy are the exact same person just in a different situation. They think the same, they act the same, they think religion is a bunch of BS until its thrown in their faces lol
Reminds me of years ago: my little brother asked to watch "that one movie where Han Solo plays Indiana Jones". 🙃 I mean, he wasn't wrong...
You should take a look at the one Disney sells at the parks and their online store! It's $75, and I always thought it looked pretty dang good, but would like to hear your thoughts on it.
I picked that one up and reviewed it. It looks great!
The staff is that length because this is from an alternate version of the movie where Toht burned his hand on the opposite side of the medallion. He got the staff length even more wrong because he only knew about the one kadam taken back
Take the open one apart, try grinding down the plastic where able, repaint. Send Hasbro an 'I'm disappointed in you' letter with a photo of what they should have done.
It would look awesome with a wash and shading to grim it up a bit like the others.
The staff is too short... "... he's digging in the wrong place..."
Cool Indy prop replica!
Just for the record, it should be the Raven Bar version for the map room scene.
Still a very cool lighting idea, though.
I always go back 30/40 years when handling these things and marvel at yes something 70-80% of the way there realisim wise. Back then the hunks of plastic, if you got them at all were more imagination cues than any attempt at prop replication. I for one welcome these MUCH cheaper options - those elite metal castings aren't going anywhere if you want and can afford them, but for some sweet nostalgia on a budget Hasbro et al are doing amazing things in the last few years if you ask me.
At Karnak Temple they have a scale model of the complex in the interpretive center. When I saw it, all I could think was, "Somebody get me the Staff of Ra!"
Adam, I bought one on Amazon as soon as 2:34 on this video. I bought this for my eldest son's 39th birthday. The magic I just experienced is I have a rarely used credit card that had exactly enough points to get this for free! You are The Wizard!
My very first prop replica of any kind, being in Indy fanatic, was RedFour's headpiece. He was from California, and worked in metals for a business. His was cast in bronze with a Swarovski crystal in the center of it. I got one of his back in 2003. Maybe your bronze one is his? He maybe still around, perhaps on the RPF? I just got two of the Hasbro one's as well. For $50 or so, it's nice!
I was able to pick up a RedFour headpiece years ago. It’s my favorite.
Come on Adam you can totally make your own with the light pipe trick built in, but looking exactly like the original. I believe in you!
"If you're Jonesing for one",
I like what you did there.
I'm thinking it should actually be possible to remake the base into a larger one, make the staff longer into it's correct size while letting the wiring run through it, and finally; weather the plastic replica to look better. That would create a pretty good looking correct size staff that could light up when placed in the right hole
while it'd certainly be non trivial work, it wouldn't be particularly complicated to replicate the design of the plastic medallion (with the lightpipe and clamshell design and whatnot) except using metal for the outer pieces. you'd be able to slim down the medallion slightly due to higher strength of metal v. plastic, and it'd have a much better weight as well.
Adam,
Since you keep a stock of batteries. May I advise you to get Energizer ultimate lithium batteries. They come in all the standard sizes and have a 10-20 guaranteed shelf life. Since I discovered them I have invested in a large stock of every batterie size I regularly need. So I have 24 AA and AAA 8 9V and 12 CR2032, and as soon as I use half of them, I refill them as well as rotate the older batteries to be used next. I haven't grabbed a single dead or leaking batteries in the 3+ years since I did that. I have used exclusively lithium batteries since they became commonly available to protect my devices from leaking batteries. I couldn't tell you how many items I have seen destroyed by leaking batteries over the years.
I'd disassemble it and repaint the clamshell parts. Needs better paint/wash/aging, etc.
@TechnologyConnections "Through the magic of buying two of them."
Staff meeting.... great pun.
I love Adam Savage going all in with Indiana Jones and Blade Runner. Considering, I love those the most, but Adam teaches me new things about it every time! As for everything he talks about! Love this man
I love Barry Manot’s work. He is a great artist. Love his miniatures like Thane Tostig. I need to get one of those staff pieces.
Always a wonderful video Adam sir you are awesome
When you are recreating a prop, how do you judge, for yourself, what looks good with your mark 1 eyeball verses how it may look on film with lighting a possible filters, which version do you go for?
Kinda think Adam needs to make one with the light up aspect. Could be a great series of videos. Love ya Adam.
I’m a fan of the Indiana Jones films and I got into the franchise and I enjoyed the Mythbusters episodes on Indiana Jones and the Blade Runner video on the gun and seeing the props from 2049
The lighting-up is just okay. If it could project a spot of light across a floor to your notional Well of Souls map model, it would be cool.
The path is clear. You have to make one from bronze that is perfectly accurate but also lights up.
One of my favorite eps of MacGyver growing up was the one that did a staff thing like Indiana Jones. That looks, so cool. And because of my psoriasis back in the day cleaning my computer was like the map room scene XD. But that is a really, really cool toy.
Hello Adam, I have a question what is more important to you when collecting objects the way they look or how they feel in your hand.
It's £50?! I know this is a niche market, but still... I'd expect it to look a lot better for that price.
Adam, awesome work your doing. There is a little treasure I've been trying to reproduce It's the Egyptian money that was never used in Raiders of the Lost Ark but can only find one side to the note..2 stories behind it...Sallah either gave a few 50 cent notes to Indy and Marion before going to the market and or this money was supposed to be thrown in air to act as a distraction...any help in this quest would be well appreciated.
Love Indy relared videos, another great video.
I have like 6kg of old bronze coins (all of them really worn-out so there's not any numismatic value in them) and I would love to cast my own Ra's staff headpiece. Do you recomend any specific method to make the mold? I found a couple 3d printable versions that look pretty good.
I would love to see a one day build where Adam distresses the plastic medallion so it has a more authentic look (if he can't make a custom cast...)
Since you bought two, I'd love to see you give one of them some painting/weathering love to bring the plastic closer to screen original.
YES I was just thinking the same thing!!
now you've got to do a one day build where you modify the piece to look more accurate while retaining the light up mechanic. If you could put the light hardware into the end of a full length staff with a switch on the tip, you could walk around in costume and set the staff down anywhere and get it to light up, would be cool.
How did you get a cast of the hero version of this? Make another mold I'd love to see you do that! I want a real copy of one myself someday.
Adam, you should do some weathering paint on the toy replica, maybe it’ll look a bit better and more realistic!
you could build a new base, have one power the light up headpiece and you could display all of them on a mini hole grid, each on their own staff tops.
I have two headpiece replicas myself. One is Acme Artifacts' magnificent gold(ish) plated version, and the Disney version sold in the Parks. Both of mine have red crystals. I know they are amber on screen, but the spot of light in the Map Room was red, and that's the one that stuck with me as a kid. I've been contemplating this light up version. But I don't know if I'm thrilled about the text lighting up.
The Abner Ravenwood backstory is the backstory we need to see.
There’s a jewelry version of the medallion now, silver plated with gold, but not as big as the props. I’m thinking about getting one ❤
Time to make a bronze one that lights up. Use a real rock for the base and the correct staff length. Would make a awesome piece to have in the corner of the office
"if you're jonesing for one" I was dying
Now that you have seen how it lights up it would be cool to make one in metal with perhaps a glass core. It would be especially cool to have a laser pointer shine through the jewel.
Indiana Jones movies (specifically the original 3) are my all time favorite movies of all time! The only thing that’s comparable is the Star Wars trilogy ( original 3) that are great as well!
What it REALLY needs is a red/orange laser diode in the stone that projects a beam onto the floor, but only if you use the correct hole in the base.
And a staff that is 6 (-1) kadam tall.
And a full 3D model of Tanis.
Awesome video! Hey Adam, are you excited for the new Indiana Jones movie?
mod the hasbro version by putting a laser pointing up inside the staff pole, a hole in the bottom of the medallion for the laser path up to the crystal, and then an angled mirror inside the crystal to send the beam out and angled slightly downward.
I love Adam's unboxing videos.
"If you're Jones-ing for one" ?? Yer killing me, Mr Savage! :D :D :D
The prop i want is the book Jones uses to refer to the illustration of the Ark of the Covenant
I feel like there should be an de-age video coming or some improvement video where Adam gonna make this look even better.
Hi, do the other rod holders do anything or is just that one you used?
I see so many interesting variants of the medallion, but most of the variants are rare to come by like the Tanis
I wonder if you also have the cup of Christ from The Last Crusade?
I've seen many plastic versions of it, also the licensed ceramic version, but never an actual wood version with gold leaf.
I would actually be surprised if you don't have one 😂
If you do, did you make it yourself?
The 'original' was a clay cup.
I got a decent one from a ren faire
He hates all other Indy films so I doubt he has any props 🤷🏻♂️
@@wokeupinapanic untrue as he has diary from the same film, multiple versions in fact. including the golden cross from young indy.
@@DecanFrost and if you watched the video he posted about the diary, you’d know that he goes on record as saying that Raiders is the only movie in the franchise he even acknowledges which is why he calls it Raiders and not Indiana Jones 🤷🏻♂️
Adam, opening it up, and in his mind saying "Mediocre" in his best Immortan Joe.
"I've been 'Jonesing' for one." Well played sir.
Que genial trabajo 💗💗💗
It's not a stunning replica by any means, however if it's a toy aimed towards a younger generation who may just now be learning about Indiana Jones, I'm all for it. I've got 3 young nephews, I'm sure they'd love this thing once they're old enough to watch Indy. Hopefully a little older than I was, I think I was like 8 the first time I saw Temple of Doom and was traumatized by Mola Ram yoinking that dudes living heart 😆
Could you review the Disney World/Disneyland Indy artifact replicas?
What are the other holes for?
where can we find those beautifull replica's of the headpiece?
That lighting does look pretty cool
Where did you get the two hero props from?
Now i want a tattoo of the burned Ra Headpeace in my hand .
🔥🔥🔥 that thing is huge looks bomb deff gota try
Adam you should recreate this using actual stone, wood and metal that still lights up!
I wonder if Adam's prop storage is as big as the warehouse at the end of ROTLA.
Don’t forget the actor who went to pick up the head piece and supposedly burnt it into his hand. He was the late father to the actress Emily Lloyd.
Sorry to correct you, but Emily Lloyd's dad was Roger Lloyd-Pack, who played Trigger in Only Fools and Horses.
Toht, the character you are referring to, was played by Ronald Lacey, his daughter being Rebecca Lacey.
Does Adam have any documented opinion on the Indy replicas sold in DIsney parks?
I doubt it. Most of them are not very good quality. Private replica makers have made much better. I’m my opinion the only one he’d probably recommend is the crystal skull. For the price, and the light up feature? It’s a good deal. It’s undersized but by far the most affordable for that prop. There are very few skull replicas out there and the others are all a grand or up. He’d probably refrain from bad talking Disney or Hasbro on these channels, since that’s not very smart for business or freebies! Lol. But if you know his passion for accuracy and quality, it’s easy to have a good idea where his opinion would land. Doesn’t mean there is anything wrong with the Disney stuff. Everyone has a budget and with some weathering a lot of the items will look fantastic to any Indy fan. Unless you want to drop thousands on a nice Indy collection, they are more than good enough.
The next step would be to have a motion detector in it, or solar charging. Or having a laser pointer shoot out the front when light hits the back! Complete with dramatic music.
I got the disney one from my work awhile ago, cool item to put on a shelf but I wish it was a bit more realistic given that it was 80$ CAD.
I have a metal version of the Headpiece. It’s claimed to have been cast from an original. The sculpting is not the cleanest (I was seriously thinking of sculpting my own,) but I heard that there were copies given out as gifts when the film came out. Could it have been cast from one of those?
It’s possible. It could also have been cast from a casting, or a casting of a casting, and so on. Headpiece lineage gets fuzzy quick on account of such widespread replication, and unfortunately, some pieces that have been used as the basis for replicas, featured prominently in the media, and even auctioned have been decidedly inconclusive when it comes to actual evidence for their provenance given the iconic nature of the prop. Some collectors are also more lax than others in what counts as “original” (lumping in crew gifts, pieces made by the same craftsperson using the same or similar techniques as souvenirs, etc.), and the defensive desire to believe that you’ve got the real deal is a difficult force to overcome despite lacking proof. If you search “Jason DeBord” and “Staff of Ra,” you should find a 2009 article that delves into some of these issues.
Suffice it to say that while there’s a decent chance that your piece is some number of generations away from either an original (used / intended for use during production), a crew gift, or a craftsperson souvenir, I would suggest taking any assurance as to the source category or the specific number of generations with a healthy grain of salt.
Their mistake was making it in 3 parts. It should've been a 1:1 cast of a movie one in the clear material they used for the light pipe, and simply apply a metal coating on top, with the letters and gem sockets masked, this would've been closer to the real one, as is,... kinda phoned in, considering we used to get some pretty sick light pipe toys back in the day... toys that were dice sized, like the small cars that would light up if pressed down or the various die cast metal guns with light effects that were made in the same fashion. Surprised Hasbro isn't able to at least match that.
There's no such thing as 'phoned in', the fact they even bothered to make one AT ALL, is an enormous unnecessary effort. Typical toxic fanboy nonsense. Unlike Adam who can appreciate it for what it is because he actually has the knowledge/experience.
I was hoping for an industrial grade, metal cutting laser to come shooting out of the central gemstone and melt something in Adam’s studio...
It would take me 45 minutes of looking and probably a trip to the hardware store to find a screwdriver and you practically materialized one out of thin air in a nanosecond.
Please make a video of you weathering this!
You should review the Disney Park’s Staff of Ra headpiece!
I get it. I feel the same about the alchemists device in cronos... Trying finding one of those made by hasbro 😢
that staff meeting pun was painful
A custom wash and it would improve a lot. The sculpting looks to be there.
I feel a ODB coming to make this thing actually look right.
Would love to see adam weathering the hasbro one
Well at least you can copper plate it except the glowing parts ... and then add some patina (you can search how to plate plastic)
Do you have a drawer for battery's?
The Indianapolis children's museum has the cross I wish they would 3d scan it and share it
Last I checked, their pieces were on loan from the Lucasfilm Archives, so that would be up to them. I think there are decent replicas out there, though.
Have you built the staff for your head price?
Would be great to use the toy as mould and cast it in bronze. Then reassemble with the orange plastic still inside.
Do you think a black wash would help bring out some of the details on the Hasbro model?