That may be due to dust particles entering into the disk(CCD). For this you need to take device to service centre and clean the disk. Other reason may be due to CCD issue which may need to be replaced.
This is the standard procedure. Once we are perfect, we can use other shortcut key as well. But I strongly suggest to go through this procedure for beginners.
Open Trimble access software, - go to general survey, -create or open new job -go to stake out - setup station - go to lines -under stake option, you will find station/offset from line - fill up the required parameter and you can proceed further
Estação excelente
What is distance tolerance in trimble M3? Found on stakeout option function.
You can adjust the tolerance option on setting. It depends upon the types of survey you are doing.
it's a good one 👏👏👏
Appreciate your comment.
I want trimble m3 d1 resection pross plz explain
My trimble m3 got over speed problem.
How to fix it?
That may be due to dust particles entering into the disk(CCD). For this you need to take device to service centre and clean the disk.
Other reason may be due to CCD issue which may need to be replaced.
Make surveying simple
This is the standard procedure. Once we are perfect, we can use other shortcut key as well. But I strongly suggest to go through this procedure for beginners.
thanks sir
thanks a lot sir
Most welcome
How much is the current price in nepal including VAT
Depends upon the model and accessories required. Ranges from 6,50,000/- in Nepal
Showing over speed and and is not taking the measurements correctly. How to solve the overspeed problem?
And please provide your contact number.
Over speed problem needs to be repaired on lab. It may be due to problem on CCD unit.
@@SurveyNepal thank you for your help
Resection video banavo bhai
trimble TS kaha painxa ? authorised ho?
Which model do you want. Please kindly let me know.
Since limited models are available for now due to lockdown issues, let me know the model
@@SurveyNepal trimble C5
(2 " lai kati )?
(5" lai kati ho ) ?
@@mohanmaharjan5800 C5 5" costs around 7.50 lakh plus vat(around rate not exact)
And c5 2" costs around 8.50 lakh plus vat
Please sir ji send the video , Trimble M3 TS, how to know Line offset work out at site.
OK I shall upload it soon. Thank you for your suggestion.
Open Trimble access software,
- go to general survey,
-create or open new job
-go to stake out
- setup station
- go to lines
-under stake option, you will find station/offset from line
- fill up the required parameter and you can proceed further
@@SurveyNepal please tell how to lay out arc. Bcz its different from line
Bm transfer m3
You need to do resection. I will make a video about it soon