Yes you can make this, but it will need a slight modification. I this plane, two servos used for the elevator are mixed together using elevon mixing, so they are used as elevator as well as ailerons. If you don't want to use elevon settings, then you can achieve this by using two servos for the ailerons and mix them using a y cable, so they can be used to control roll movement. While the elevator will have its own single servo that is only used to control pitch movement. This setup is like the traditional one used in normal trainer airplanes. With two servos for aileron and one servo for elevator.
Yes you can use cardboard. It will become a bit heavy but hopefully fly. So overcome the extra weight of cardboard, it will need to fly fast to be in the air. If you're a beginner, then I will recommend this plane th-cam.com/video/T9jlJCKFaqI/w-d-xo.htmlsi=GtaOiinSblNKmQZf
I suggest two carbon spars installed with epoxy on each side running laterally along the fuselage. Also, connecting those two spars at the front and back creating a box structure probably would have limit the amount of damage in imperfect landings. Great 👍 Video
A full 9 second maiden flight until total loss, ouch. That motor and ESC are just way too heavy and very inefficient on this small propeller, plus the battery is 3 times the size and weight of what it should be. I guess with the right components, the model could weigh half as much and fly controllably.
Yes you're right. Actually it was my first ever rc plane flight. Now, I'm making some larger rc planes for more slow and stable flights. Will soon upload build videos for that ones too. By the way, only the front part of fuselage broke which I remade later. Thanks for your feedback.
@@AKElectroDIY o nice mera wala upar chala gya phir cg kharab ho gya and nose nichay baji aa ker manay b ab trainer banaya ha lakin esc high amp ki chaiye ab ma vo lagau ga
@@rehmanazhar6517 Trainer kay liye low amp ki esc chal jaati hai. Fighter kay liye high amp esc chahiye hoti hai. 1000 kv ki motor 15-20 amp leti hai to us kay liye 30A esc chal jaati hai. Lekin 2450kv motor 20-30 A leti hai to us kay liye 40A esc best rehti hai
Hey is it possible to make this kind of rc plane without using elevon mixing by using y style servo cable?
Yes you can make this, but it will need a slight modification.
I this plane, two servos used for the elevator are mixed together using elevon mixing, so they are used as elevator as well as ailerons.
If you don't want to use elevon settings, then you can achieve this by using two servos for the ailerons and mix them using a y cable, so they can be used to control roll movement. While the elevator will have its own single servo that is only used to control pitch movement.
This setup is like the traditional one used in normal trainer airplanes. With two servos for aileron and one servo for elevator.
Hey will cardboard be suitable for this plane and does flysky ct6b has mix settings for this kind of plane
Yes you can use cardboard. It will become a bit heavy but hopefully fly. So overcome the extra weight of cardboard, it will need to fly fast to be in the air. If you're a beginner, then I will recommend this plane th-cam.com/video/T9jlJCKFaqI/w-d-xo.htmlsi=GtaOiinSblNKmQZf
Ok thanks
I suggest two carbon spars installed with epoxy on each side running laterally along the fuselage. Also, connecting those two spars at the front and back creating a box structure probably would have limit the amount of damage in imperfect landings. Great 👍 Video
Thanks for your feedback. Your idea is great. Probably would consider this in the next builds.
Nice build. Too bad the flight didn't go that well.
Thanks.
Actually it was my first ever rc flight experience.
Tomorrow I will upload the rc uav flight. It was successful. Stay tuned 😊
The 9g servo is that 90 or 180 Degree?
@@bq15096 Its 180 degree servo. But the default movement is 90 degree for rc airplanes. This limit is set by the transmitter.
Nice ❤
Thanks
👍👍
❤❤
A full 9 second maiden flight until total loss, ouch. That motor and ESC are just way too heavy and very inefficient on this small propeller, plus the battery is 3 times the size and weight of what it should be. I guess with the right components, the model could weigh half as much and fly controllably.
Yes you're right. Actually it was my first ever rc plane flight. Now, I'm making some larger rc planes for more slow and stable flights. Will soon upload build videos for that ones too.
By the way, only the front part of fuselage broke which I remade later.
Thanks for your feedback.
manay b same yai banaya tha 2450kv motor sa mere ka b yai haal hua iske liya pilot expereienced hona chaiye
@@rehmanazhar6517 G bilkul sahi kaha ap ne. Mene is ke baad trainer plane pe practice ki aur ab mein ye wala easily fly kar sakta hu.
@@AKElectroDIY o nice mera wala upar chala gya phir cg kharab ho gya and nose nichay baji aa ker manay b ab trainer banaya ha lakin esc high amp ki chaiye ab ma vo lagau ga
@@rehmanazhar6517 Trainer kay liye low amp ki esc chal jaati hai. Fighter kay liye high amp esc chahiye hoti hai. 1000 kv ki motor 15-20 amp leti hai to us kay liye 30A esc chal jaati hai. Lekin 2450kv motor 20-30 A leti hai to us kay liye 40A esc best rehti hai
Can I use a 2205 2300kv motor?
Yes you can for sure.
Thanks