just found your video, looks awesome. I have a c10 i want to wrap myself. i liked watching you hit some of what I thought would be hard parts to wrap. nice work!
Boa noite congrats carros this 1963 Chevy c-10 proves Second time s a charm, this 1955 210 wagon is no exception trabalho c-10 era Detroit pistons uau sabia de tudo vai amén bom
@@isaac787garage3 another question for ya. Did you wrap over primer? My truck is currently down to almost baresteel everywhere. Just curious what you did to prep before the wrapping? Thanks again!
Felicidades amigo te quedo muy bien. Tengo una pregunta como se llama el color y la compañia que lo vende . Tambien el bumper y el grill son vinyl tambien?
That came out real nice. You made it look pretty easy, have you wrapped cars before? I got a rough estimate of $3600 to wrap my F 100, kind of on the fence between paint and wrap.
Thanks. Belive it or not its my first time wrapping a car. I watched a lot of videos and as long as you have your wrap tools and patience it can be done. The wrap I used was $ 700 and like 50 for the tool kit I got in Amazon.
@@oscarherrera1867 SETLUX Juego de 32 herramientas de vinilo para envolver el automóvil, herramienta de instalación de película protectora de vidrio para ventana de vehículo, incluye escobilla de fieltro de acero inoxidable, fieltro, fieltro, guantes de trabajo, imanes de vinilo a.co/d/ekUiXbz
why did you two piece the sides with the knifeless tape instead of one piece ?? about to take this same project on myself any prospective and advise would be greatly appreciated
Hi. I did it that way because the truck is on primer, and i wanted to prevent wasting paper in case i had to re-do it, so the simpler way was to cut it in pieces. Also, its easier to do it that way especially since the truck has a side molding (still not installed) that would cover the cut of the wrap pieces.
Thanks .The color is Ultra Gloss Candy Red ..vvividshop.com/collections/ultra-gloss-1?gclid=Cj0KCQiAo-yfBhD_ARIsANr56g4-8y7h39clTUKYbxPtu_7yeC2mTWVBlPzSxYDDa1-BtkRqKMLCgsYaAkrEEALw_wcB
@@terryr7054 I got the bigger roll of 100ft to make sure I had enough and because many reviews said that there might be color differences between rolls batches. I anyways had plenty left over, like 40% of the Roll.
Hi. It is but you have to make sure you dont waste it. If this is your first time wrapping I would buy a bigger roll to make sure you have enough for any mistakes. Also i recommend leaving the roof and the hood for last since they need a bigger piece to complete.
😁 I did it because it was cheapper but its a lot of work so i dont do it for others. I say between 2 profesionals (wrapper vs paint) it really depends on where you take it to be done. My wrap roll was around $600.
I've been on Facebook and they are really pricy seen one in person. Lik 20k or so everything rebuildt clean leather inside is top notch clean wheels basically 1 owner the one that got passed down by was just investing. Put 16-18 in all parts and ask 20k. In baby blue man she is just a beautiful car. Believe it was a 87. And a truck we have in Mexico is VERY special. It's even older then most trucks that I've seen. It's a 67 or something like that.. needs a new paint job and wheels. Windows repaired and upgraded to some nice leather. Forgot the old bulbs and install some nice LEDs. And just a very clean truck.. at most might spend 3k at the very most. Seen one that's also perfect.. only thing is a cracked window everything else is good. Have a 2003 ram great truck. But last straw of life. Appreciate the time I had. And learning how to reverse and all. And owe a 2016 Hyundai Elantra. And lastly a 2020 expedition. But it's all in pops name. Only one I have truly is the Hyundai Elantra have gone to Mexico 2 time and back. But a truck like this is needed. Can't drive anywhere. Nasty roads and bumps. Anywho. Clean truck. Plan to get the one in Mexico in candy red😱😱😎
Normally in a daily car it does last 3 to 4 years. However, if you use it in a classic car that is kept in the garage, with proper care and is not used every day, it can last longer.
Amigo buenas tardes tengo otra duda en que medida pidio el vinil tengo una Chevrolet que lo quiero trabajar con ese material y cuántos metros pido disculpa la molestia
@@ivanherrera2853 Saludos . No es Molestia Me puedes preguntar lo que nesecites 👍.. yo Compre el de 100 pies pq tenia miedo que si no me daba el de menos cantidad y compraba otro deapues el colos cambiara un poco y como quiera me sobro la Mitad ,Osea use como 50 pies en toda la c10 . Si tu color es Negro puedes comprar el de 50 ft y si te falta compras utro pequeño pq el color negro no cambia Casi nunca.
just found your video, looks awesome. I have a c10 i want to wrap myself. i liked watching you hit some of what I thought would be hard parts to wrap. nice work!
Thank You very much. I hope yours turns out awesome.
Nice job looks amazing great color combination. Outstanding work
Badass square body!! The wrap came out clean af, Truck looks amazing!
Thanks 👍
Damn nice job man, if you ever come to Ga. I’ve gotta job for ya 👍🏼
Been searching for the bezels and such painged black, finally found one! It looks pretty good, im going to paint one of the spare sets i have black.
Awesome! Its always good to have a spare.
That was an outstanding job with your brother
Boa noite congrats carros this 1963 Chevy c-10 proves Second time s a charm, this 1955 210 wagon is no exception trabalho c-10 era Detroit pistons uau sabia de tudo vai amén bom
Dude that looks Great! You have way more patience than I.
Thanks 😁
Impressive! This looks great!
Thanks 👍
Buen trabajo, Boricua. 👍💪🫶
Gracias ✌🏻
Nice!
Amazing!!!😮
Beautiful!
Thanks
Looks great! im about to wrap my sqaurebody, this gave me some motivation haha.
Thanks 👍
@@isaac787garage3 Did you wrap your bumper,mirros,handles and emblems? Or paint?
I used Plasti Dip ..
@@isaac787garage3 Ah yes,
@@isaac787garage3 another question for ya. Did you wrap over primer? My truck is currently down to almost baresteel everywhere. Just curious what you did to prep before the wrapping? Thanks again!
Man, that is clean! I have been considering this on my K5 project. This video is 4 months old. How is it holding up?
Thanks.. the wrap is in Perfect Condition ..
Excellent! So what are some of the mistakes you wish you'd been aware to avoid beforehand?
Probably not covering the hole side and doing it in 3 sections instead of one haha
After seeing you doing those vent holes in the hood had made me second guess doing this myself. That part would drive me crazy
😂😂😂😂 Thanks
The grill and bumper looks awesome what did you use ?
Thanks .. I use Plasti dip ..
Felicidades amigo te quedo muy bien. Tengo una pregunta como se llama el color y la compañia que lo vende . Tambien el bumper y el grill son vinyl tambien?
Gracias y Saludos.. El color se llama Ultra Gloss Candy Red de la Compañia VViViD . EL Bumper y el Grill los Pinte Con Plasti Dip por ahora .. 👍
@@isaac787garage3 gracias bro saludos desde portland oregon 🌲🌲
Gracias a ti Saludos 🙏
How’s the wrap holding up 7 months later?
Check out Today's Short Video .. The Wrap is in Perfect Condition 👍
Super clean bro!!! What grille is that? If you dont mind sharing where can I acquire one
Thanks Francisco . OEM 1979 Grille whit plasti Dip Mate black
That came out real nice. You made it look pretty easy, have you wrapped cars before? I got a rough estimate of $3600 to wrap my F 100, kind of on the fence between paint and wrap.
Thanks. Belive it or not its my first time wrapping a car. I watched a lot of videos and as long as you have your wrap tools and patience it can be done. The wrap I used was $ 700 and like 50 for the tool kit I got in Amazon.
@Isaac 787 Garage what tool kit on Amazon? What's it called so I can order it thank you ! I also subbed
@@oscarherrera1867 SETLUX Juego de 32 herramientas de vinilo para envolver el automóvil, herramienta de instalación de película protectora de vidrio para ventana de vehículo, incluye escobilla de fieltro de acero inoxidable, fieltro, fieltro, guantes de trabajo, imanes de vinilo a.co/d/ekUiXbz
Cinta WrapCut para cortar los bordes de un vinilo, 200 pies a.co/d/207UKxc
@@isaac787garage3 for real? You did amazing that hood vent yikes tedious
Where you located ? I need mines did now!
why did you two piece the sides with the knifeless tape instead of one piece ?? about to take this same project on myself any prospective and advise would be greatly appreciated
Hi. I did it that way because the truck is on primer, and i wanted to prevent wasting paper in case i had to re-do it, so the simpler way was to cut it in pieces. Also, its easier to do it that way especially since the truck has a side molding (still not installed) that would cover the cut of the wrap pieces.
Looks awesome! What wrap did you use? Do you have a link to it?
Thanks .The color is Ultra Gloss Candy Red ..vvividshop.com/collections/ultra-gloss-1?gclid=Cj0KCQiAo-yfBhD_ARIsANr56g4-8y7h39clTUKYbxPtu_7yeC2mTWVBlPzSxYDDa1-BtkRqKMLCgsYaAkrEEALw_wcB
@@isaac787garage3 it looks fantastic!
@@isaac787garage3 what size rolls were you using?
@@terryr7054 I got the bigger roll of 100ft to make sure I had enough and because many reviews said that there might be color differences between rolls batches. I anyways had plenty left over, like 40% of the Roll.
@@isaac787garage3 thanks for the info and the video
Damn I want to do this with mine!!!
what grill do you have? it's awesome
@SupremeNKickz OEM grill with Plasti Dip.
Looks good
I saw some rolls that were 5ft x 60 ft is that enough to do this i have the same truck
Hi. It is but you have to make sure you dont waste it. If this is your first time wrapping I would buy a bigger roll to make sure you have enough for any mistakes. Also i recommend leaving the roof and the hood for last since they need a bigger piece to complete.
How long did this take you? Looks great
@@jigmetv8497 Thanks .Since I wasn't in a hurry, I did it slowly and it took me 2 weeks
Can it be done in 1 pc or is it impossible because of many angles , I want to try on my 81-87 style
I did it in pieces so it would be easier and anyways the molding i am installing later on would cover the union of the 2 pieces.
@@isaac787garage3 your truck looks sharp!
Excelente trabajo como se llama la marca del vinilo y como se pide
@@ivanherrera2853 amzn.to/3YQIS52
Gracias por la información muy amable
@@ivanherrera2853 Gracias a ti 👍
Hey Issac where did you order your wrap from I love the color?
@@Tallguyj amzn.to/4g9Fpo5
@@Tallguyj Thanks ..
Please wrap my 85 . Is this cheaper than me getting painted thanks 🙏🏽
😁 I did it because it was cheapper but its a lot of work so i dont do it for others. I say between 2 profesionals (wrapper vs paint) it really depends on where you take it to be done. My wrap roll was around $600.
Nice! What wheels do you have?
Vossen cv1
Killer 👌
Se mira bien mamalona 👌👏👏👏👏
Gracias 👍
where did you get all the black trim at? did you do it your self?
I Painted the Original trim ...
I've been on Facebook and they are really pricy seen one in person. Lik 20k or so everything rebuildt clean leather inside is top notch clean wheels basically 1 owner the one that got passed down by was just investing. Put 16-18 in all parts and ask 20k. In baby blue man she is just a beautiful car. Believe it was a 87. And a truck we have in Mexico is VERY special. It's even older then most trucks that I've seen. It's a 67 or something like that.. needs a new paint job and wheels. Windows repaired and upgraded to some nice leather. Forgot the old bulbs and install some nice LEDs. And just a very clean truck.. at most might spend 3k at the very most. Seen one that's also perfect.. only thing is a cracked window everything else is good. Have a 2003 ram great truck. But last straw of life. Appreciate the time I had. And learning how to reverse and all. And owe a 2016 Hyundai Elantra. And lastly a 2020 expedition. But it's all in pops name. Only one I have truly is the Hyundai Elantra have gone to Mexico 2 time and back. But a truck like this is needed. Can't drive anywhere. Nasty roads and bumps. Anywho. Clean truck. Plan to get the one in Mexico in candy red😱😱😎
🔥🔥🔥🔥
Was thinking about maybe wrapping my 87' short bed, but heard it only last like 3-4 years. Can anyone confirm that?
Normally in a daily car it does last 3 to 4 years. However, if you use it in a classic car that is kept in the garage, with proper care and is not used every day, it can last longer.
Amigo buenas tardes tengo otra duda en que medida pidio el vinil tengo una Chevrolet que lo quiero trabajar con ese material y cuántos metros pido disculpa la molestia
@@ivanherrera2853 Saludos . No es Molestia Me puedes preguntar lo que nesecites 👍.. yo Compre el de 100 pies pq tenia miedo que si no me daba el de menos cantidad y compraba otro deapues el colos cambiara un poco y como quiera me sobro la Mitad ,Osea use como 50 pies en toda la c10 . Si tu color es Negro puedes comprar el de 50 ft y si te falta compras utro pequeño pq el color negro no cambia Casi nunca.
Muchas gracias amigo , excelente noche.
@@ivanherrera2853 Gracias
Hermosa🔥
Gracias✌🏻
Where you get your wrap from ?
amzn.to/3WOSQmi
Wow, never saw that before! Here's a video of my OBS: th-cam.com/video/5YjhzS9wBjE/w-d-xo.html
Thanks for uploading!
Thanks man . Nice and Clean Silverado 👍
How much what did you use?
For this truck I used 50ft
Where did you find your grill
Its the oem grill .. Painted with plasti Dip ..
@@isaac787garage3 thanks