basic explaination of installation ( pemasangan ) of Bosch CCSD 1000 microphone
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- video ini bertujuan untuk memberikan infomasi basic tentang pemasangan BOSCH CCSD 1000 conference mic didalam sesebuah bilik mesyuarat.
untuk maklumat lanjut boleh menghubungi 0172348200
atau salessupport@hayamim.com.my
saya like satu kali
Thanks for uploading. I don't understand your language. adjacent extenders are seemed to be needlessly more lengthy which may caused problems in future. don't they have shorter extensions? and you have shown only one zone connection. what if there were 4 PTZ cameras, how it should be connected and programmed? If you want it to be use for longer life, you must dip the connectors in thin machine oil and to be taped after connecting togeather.
hi Rishan.
1. Yes you're right , the extension cable do not be very lenghty you can opt for shorter extension.
i use those extension in the video as an example.
by the way, Bosch offers 5 meter and 10 meter extension cable.
2. yes this video is explicitly showing the zone connection only, as described in the video title.
i will make a separate video for the PTZ camera. and of course, it will be in english 😅
3. yes, it is good to tape the cable connection, However the best practice is to use the cable clamp DCN-DISCLM or LBB4117/00. ( i should have included that in this video )
Thanks for you comment rishan.. appreciate it ✌
Superb bro..... Please communicate in English ❤
your welcome, hope it benefits you . 😉
by the way, im from malaysia, A lot of my Malaysian Clients ask me to communicate in malay ( native language).
So i try to do a little bit of both 😉👌
Please make vdo in English. From basic setup with equipment name work and their control process.... Proper conference vc
Hi Amjad.
Try this video link.. it might help
th-cam.com/video/GEvnanpHx5g/w-d-xo.htmlsi=_sG0zzm9MTwWmylo
Tell me how to remove auto shutdown; during large conferences, all the equipment automatically turns off every 2-3 hours and you have to turn everything back on. As I understand it, the timer goes off
Hi Vk, Its super easy, Automatic turn off is called "inactivity shutdown" .
you can turn it off under setting in the Bosch web setting.
if you still can't do it and you are from india, you can email to
Mohit.Kukreja@in.Bosch.com
Good luck bro ..
Untuk audio pake type speker apa bang
Tq
apa punca kadang2 jadi humming
Punca kadang² jadi humming sebab tak on function DAFS ( DIGITAL ACOUSTIC FEEDBACK SUPPRESSOR)
function tue memang dah ada dalam control unit tue.. free 😉👌
salam bos...barng kalau nak beli kat mana
wasalam Fist,
Barang kalau nak beli, boleh call Hayamim
60172348200
0361893213
Hello Sir,
My Borsch, DCN-CCUB is not geting booted up , it shows "starting "on display, not moving forward.. Rest of the connected system like Mics are seemed to be ok. Everything was working but in a good morning it happened after a switch on..What could be the problem and how we can rectify it..?kindly tell me.
Thank you Sir. 🙏
Hi Tenni
Have you turn off the CCU completely ?
And try to disconnect all external device
And try to reboot it again.
@@suffiananwarThank you so much for your valuable reply 🙏..I did it Sir, it is still in the same state..
@@tennivarghese867 Hi Bro, I suggest you snd to the Bosch Service center to get it diagnosed. something is wrong with your unit .
Spker di pasang di langit2?
Hi sum , langit², apa maksudnya tue ?
Salam boss..mcm mana nk contact ?
Hi Jom,
Boleh contact hayamim trus
0172348200
Atau
office 03 61893213
Please tell English,Bengali or Bengali
Hi BRo..
Ill be doing the next video in english
thanks for the comment
Please speak English