AddDoFeed - Small diameter high feed milling solution
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Small diameter high-feed milling cutter for expanded application coverage,
featuring cutter bodies as small as ø8 mm
↓Please visit our website for details↓
tungaloy.com/p...
#Tungaloy
#Highfeed
#Machiningcenter
#DoFeedTri
#DoFeed
#CuttingTool
#4K
Your tools speak for themselves... Congratulations on your advertising; it really gets the message across.
Thank you for liking it!
Best inserts ever used..! ☺️
Thank you so much for your very kind words!
ADDicted to TUNGALOY
🏁The best in class ever!
저희도 지금 사용하고 있습니다.
효율이 넘 좋아요..
칭찬의 말씀에 감사드립니다!
그렇게 말해 주시면 매우 기쁩니다!
すごくいい工具ですね🛠
お褒めのお言葉ありがとうございます！
Very Nice
Thank you for your good comment!!
Every Tungaloy video runs the "competitor" at a snail pace. Really disappointing because their products are decent. Just be honest guys.
Thank you for your comment.
What do you mean by that?
@@TungaloyCorporation surely he's being clear, he's saying that you're deliberately running your competitors tool at an unreasonably slow speed to create an unfair comparison
More wideo witch this end mill 🥰🤩
but cost more high becouse need 7pcs cutting eye
I'd like to see the surface finish better
Thank you for your precious words!
@@TungaloyCorporation not a better finish just a better picture
Toop
It's a roughing tool. Surface finish doesn't matter.
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
😊👍⭐️
Does this tool require higher Spindle horsepower?
High feed end mills don't really need that much power, however you really need machine with high feedrate and acceleration to utilize their full potential.
@@Stasiek_Zabojca 10.tysiecy posow max maszyny będzie ok czy za mało? Wrzeciono 8 tysiecy rpm
素晴らしい工具ですね。推奨してるミーリングチャックはありますか？
コメントありがとうございます！
そう言って頂けますと大変嬉しいです！
特に推奨はなく、基本的には皆様がご使用のチャックで問題ございませんが、
小径工具ですので、大きいチャックですとコレットなどが必要になる事もございます。
この手の加工動画に使用している機械のスペックを示してほしいです。
BT30とBT50だと加工条件に差が出ると思います。
工具突き出し長さ(希望は主軸端面からの距離)もあればもっと助かります。
コメントありがとうございます。
今回はBT30で加工を行いました。
I have EXLS02M010C10.0LH20R02 WITH MJ insets, right now i m working on s
feed/tooth=0.5
spindle speed 3800
feed rate 3800.
depth cut=0.2mm
material Mild steel
can I run my tools this fast as shown in video?
i need strong guidance, as i am feeling under confidence.
Processing can be done under higher conditions.
Spindle speed 5500, feed/tooth 0.8, depth of cut 0.3
@@TungaloyCorporation thanks for coordinating,
and what percentage of engagement do I use in general. For say, maintaining outer dimension of plate.
CNC all over item available hai
데구텍blmp랑비슷하게 생겼네요 이거 인서트 커터 이름좀요
Everything is good until those tiny screws fly off uncertainly during cuts. Not good for process security
Time=money
They don't. It's quite surprising actually
They don't. The force is almost 0 Newton on these.
nice! but how can I buy it in china?
@Janus Fu
Thank you for your comments.
If you need help please contact to Tungaloy China.
subs.tungaloy.com/cn/
Rm No 401 No.88 Zhabei, Jiangchang No.3 Rd, Shanghai 200436, China
Phone: +86-21-3632-1880 Fax: +86-21-3621-1918
Name of the track?
🤣🤣🤣 le frese in metallo duro vanno molto più veloci di quella mostrata nel video. E soprattutto mangiano molto di più di un inserto.
Grazie per il tuo commento!
Wtf just watched?lol
Solid endmill and your stuff?!
A regular - dunno Holex, anything - can go harder than you guys are add to…
Its just not how should be make a competition
It's not even hard steel or something! Unless they were demonstrating high overhang cutting data for the solid end mill, like you said any end mill would just smoke it. Even on a horsepower limited VMC (11kW spindle) I have run cuts of 20mm deep, 8 mm wide at 165m/min (it was near maximum horsepower already) and 0.075mm/z with a 12mm 4F end mill enough times.
-Sadia -TRAILLL TIAGO JAQUES SABINO
why chatter ?
This is not a chattering surface, but a machining surface unique to high-feed machining!
this is a very useless insert
What is the part?
There is no part that is particularly strange.
finish looked horrible
Machined surface is unique to high-feed machining.
This is not a chattering surface.
CNC all over item available hai
Thank you for your comment!