How To Make A 12V Rechargeable Battery Pack Using 18650 Battery & 3s BMS.
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Hello guys,
In this video we will see How To Make A 12V Rechargeable Battery pack using 18650 Battery & BMS.
Please LIKE, SHARE & SUBSCRIBE
To our channel to never miss any updates.
THANKS FOR WATCHING...
Best buy links(not affiliate):-
18650 battery:-
calcuttaelectr...
BMS:-
robu.in/produc...
Battery spacers:-
calcuttaelectr...
Music:-
Track: Discovery - JayJen & ASHUTOSH [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Discovery - JayJen & A...
Free Download / Stream: alplus.io/disc...
#18650battery #12vbatterypack #bmsbatterypack
Plz tell how much ah is used to charge this?
Hi dude. Thanks for your video. Will 4 cells in series work for a 1.5amp 12v bike horn? Only pulsing use via switch
I am getting tired of these how to videos that just play music. How about you explain it?
Isse agar pam8610 amplifier chalaye toh kitna backup milega
5-6 hours
12v 1amp se charge Karen toh kitna time lagega
From the battery how many moter of 12 v of 70 rpm i can run
It depends on how much current each motor draws.
Kalau di idupin pakai lampu 12v kuat 1mlm gk gan
Pls can you tell me how can i make different output and rechargeable point
Connect a male barrel connector or output wires in parallel at the same point.
Thanks 🥰
When I saw the thumbnail of 12v 20ah... I clicked the video .. but after that I got disappointment ... ye ummid nhi thi bhai ......hattttt
Ok bro, I will make corrections.
Thanks for the feedback✌️
Sir can I connect it in my solar charge controller.... Instead off my lead acid battery.... I hv already made a 10 amps 3s battery bank.... With BMS.... Pls reply me.... And what would be da charging voltage and current for this....
Yes you can connect, but only to charge not as a backup for inverter. Charging/discharging depends on the BMS used, for the one I used charging voltage can be 15-18V @ 20A peak. Do check the datasheet of your BMS, Voltage and current can vary.✌🏻
Hiii bro mean drone bana raha hu to kya 3s battery Or sathe bms power module use karsakta hu drone mea fix kar ke..!!! Koi issue ho sakta hai kya
No, bro it will work the same, only factor is your power requirement and weight of the battery.
Hey brother I need a same kind of battery urgent
Can you just make 1 for me and ship
I know you don't sell but please tell if it is possible
Sorry bro, It is not possible as of now, I have given links for the batteries in description, if you plan to make it.
any body with a calculator ....just put in 3.7 volts X 3 = 11.1 volts so not ...12volts .....and dont solder...... Is it safe to solder on a battery?
You should never solder directly on a battery. It might not be dangerous, but you will hurt the cell. The best solution is to spot weld a new nickel-plated steel tab and than solder
I need this on my bluetooth speaker 200watts 3 way super bass,i have a video
Charger koto volt koto Ampiyer lagbe,reply plz
Max. charging Voltage 18V, at 20A peak.
Amer bms bord 10 A 6s battary lagano jabre
i guess the question is how long can you run a 12v load for???
It depends on load, At 12V if a load draws 4A then it will last for 1 hour, if it draws 2A then for 2 hours and so on..
If I charge it by 14.4v how it manage.
When every cell reaches its max. Potential(4.2V) the BMS stops charging (overcharge protection). And also the BMS is rated for 18V max. Charging voltage.
How many amps you connected in the circuit
3Amps, but max. supported is 20Amps
How do you recomend to connect 12 cells to get the same 12 v?
Arrange 3 cells in series, for 12 cells there will be 4 three cells combination. Now connect these 4 in parallel, hence a 3s-4p arrangement.
Your video is incorrect, the charging should be at 12.6 volts, but it is still showing the same voltage when you tested, so it is not charging
The charging voltage used was 12.20V because I didn't had greater than that,& if you carefully notice the voltage before charging was 11.50V & after connecting to charge the Voltage was 11.70V it is due to the BMS that i used which was balancing the voltage & slowly raising the voltage , but after 2 hrs of charging, the Voltage of the batteries was around 12.20V.
@@FrolicLab ok, thanks for the info, but still full charge of 12.6v can't be achieved, or have you done something about it?
Each battery is rated for a full charge of 4.25V which makes it 12.75V for 3 in series, I used a step up module XL6009 and charged batteries by setting it (XL6009) to 13V.
3s 20a BMS 9 batterys support hotha bro...?
Yes, bro
@@FrolicLab thanks
Your using 18650 battery right? But 18650 battery is 3.7v each how can you make 12v battery?please answer my question.thanks
No bro, 18650 batteries are rated for 4.25V which comes in different current capacities. You can also check its data sheet if you need more information ✌🏻
@@FrolicLab The question is more towards understanding why are you using 6 batteries if you only want to reach 12v.
To increase current from 2Ah from 3 batteries, to 4Ah from 6 batteries i.e to double the power for the same voltage.
so why not put the in parallel to increase your mah
All in parallel will make 4.25V and 12Ah, but I needed a 12V supply, therefore this combination.
What is the thing you use to recharge? The female attachement.
Female barrel connector
@@FrolicLab i bought this: www.amazon.ca/-/fr/gp/aw/d/B01N8VV78D/ref=ya_aw_od_pi?ie=UTF8&psc=1
Is it okay?
what is the AH of that battery pack?
4AH
can you charge it with 15V??
Sir i have a question can i use this battery in bike using this bms
Can its control buke input voltage which vary high some time and sometime low??
This setup has 4A output, You can use this BMS in your bike with more batteries in parallel.
Ok and charging voltage which high up to 24 v can b handel by the bms
No, upto 18V, I have added a link in description you can check detailed specifications for the bms.
Thanks for your reply and help♥️
your battery only 4amp. 🤭
Благодаря вашему видео одуплил как сделать правильно данную сборку , молодец полезное видео
Great work...love❤ from Bangladesh 🇧🇩
Isse agar pam8610 amplifier chalaye toh kitna backup milega
What is a amp for battery
2A - Normal discharge rate
3A - Maximum discharge rate
Hi, nice video. What kind of power supply did you use to charge the pack? Is it a proper charger (maybe a CCCV) or a simple 12 V power supply? I'm asking because I'm not sure what to use, I have a similar BMS and I don't know if it includes a charger in the same board too.
12.6v smps
Can we use 10A bms to make same battery pack??
Pwede 3s 3p itong bms?
Mare satlite findar ki battery khrab ho gayi hey 12 .6 volt
What is the total ah?
4Ah
Bad wiring and bad soldering.
Hello sir you use 12 volt charger but how much amp you use to charge?
Can I use 2 amp 12 v charger
Yes you can use it
Can this be used to power an Arduino Uno board without having any issue
Cause the 9v kind I made runs down quickly
Well I used it to power and Arduino Uno with is powering 2 ultrasonic sensors and a servo motor with a 16x4 display and a buzzer
Hope it's not too much load on a 9v battery😢
So I'm thinking of trying this 12v on the Arduino Uno Vin and GND
I hope to get a reply on this I really need the extra help at this point 🙏🏾
Charger koto volt lagebe.reply plz,,
Bro it is not working
How do you charge this? Is the input output is the same connection?
With a dc supply of 13-16V, & yes the input/output are at same point.
Hello, does your card have a scale?
Me bhut Jada paresan hun
How much amps it will give?
Bro which C rating battery should we use
I have used 1C batteries, it depends on the BMS, This BMS can handle upto 20A
(C-rating× Amp-hours= voltage)
Using this formula you can adjust C-rating according to voltage required and as handled by your BMS.
Please bhai batao
Great work bhot safai se kia
Apenas 4 Amperes
hello I would like to make a 12 v battery with 3 x 4.10 v batteries. - do they have to be mounted in series? - Which BMS do you recommend? thank you for your videos.
Yes, use them in series. And you can use any 3S 12V BMS as per your ampere requirements.
@@FrolicLab thank sir
This can be use as speed battery for xiaomi scooter? Series connection
Bhai iske liye changer konsha chaiye
Any charger or supply with voltage 14-16V will work or you can use XL6009 stepup module to charge this.
@@FrolicLab bhai ek kaam karo ap iski battery bna kr de sakte ho BMS wali 12.6 volt iska charger hey 14 volt 2 AM ka bina bms ke charge nhi ho rahi hey please help karo bhai yarr wo bhut mhenga aya hey kam se kam uske pase washul ho jaye
Bro check the circuit diagram, and check connections properly it will work, And also check your batteries if they are faulty.
@@FrolicLab bhai ap bna do kitne pase logo ye batao
Sorry bro, I don't sell anything
Dear does it have balance charging
Yes
@@FrolicLab no your bms board 20 amp doesn't have balance charging it is only protection board..
Yes bro it does, I have tested it manually and got close enough figures as mentioned in its datasheet.
Bro can explain ..How many hours to take charge with 1 amp? Because I have 12v 1amp charger
Theoretically Tc= Ah/A, Since it is a 4Ah battery it would take around 4hrs to charge with 1Amp charger.
But it will not fully charge the batteries as each battery has max. Rating of 4.25V which makes it 12.75V.
I did the same, but i used much thicker cables at the 8.4v and 12v and also much thicker at the -/+ output, for my 24v battery back of 6 battery's, so it can give much more Amps without melting the cables.
How much thick?
@@SDP17 I think it was AWG 14, i am going to make a new 24v battery back, i also use it for my Miniware TS100, that can easily use 3+ Amps.
@Fusion technology Yes it does, it works fantastic, and it is easy, but now i spot weld it to the cells, and do not solder it anymore,
yeah only the cables that comes from the BMS to the spot welded Nickel Strips, so no heat goes to the cells.
like this: th-cam.com/video/5E4pxdk4kA0/w-d-xo.html