how to make crossover for speaker?
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2020
- electronicshelpcare.net/how-t...
/ electronics-help-care-...
/ pins
electronicshelpcare.net/how-t...
/ electrohelpcare
/ @electronicshelpcare
#amplifier#transistor#circuit# - วิทยาศาสตร์และเทคโนโลยี
For the circuit diagram please visit here
shorturl.at/FNS56
Nice kaibigan watching may natutunan nanaman ako mahilig ako mag kukutingting
Very cool!
Your demo is appreciable but background music is not required and you could have used crocodile clips or breadboard for easy connections.
Bravo excellent project
I love musin,,nice wiring keep it up,,tusok done
No need for high voltage capacitor!
And you can also use here polarized capacitor. So 10uf for the vocal and 2.2uf for the tweeter!
Hi. Can you pls write the complete specs of capacitors for tweeter and vocal speaker. Thanks in advance.
How can we use polarised caps in AC circuit?
@@RajRaj-yp5kx you can put two polarized capacitors in series.
@@koonjulougrasen4432 they must be back to back - not just in series
Mayron ako mga speaker sa bahay hnd ko pa na kuting ting salamat sa pag bahagi ng video good bless
So many people asking where to buy components!! Try using the internet that's in your hand. You know what you're watching TH-cam on. Just do an internet search. Is that so hard? There's hundreds of places to buy speaker components. Hundreds.
Very nice, throw it much better!!!
i feel the music😂
Irritated background music..
Currect.
It would be better without anything
😆😆
A speaker related video with a horsey background music 😆
Yes
very nice as always
Love from Odisha
Sounds kamala bro
Thanks 😊
Very good n very nice.very important video for me... congrats to you sir for this video uploaded
How bad can a video of speakers be? This guy: YES
You put sound too high and then it sucks, too much distortion! Use lower volume and more microphone volume when recording the video!
Which type of bass get from 15/20uF capacitor to 4 ohm load 🤔... (Bass = 20Hz-100Hz and up to 250Hz max, beyond that is called midrange frequency .. Lower mid to upper mid and after high frequency )Which formula u are used 🤔
Best video
Subwofer Speekers Don't Need Capasitor, But For Midrange Speekers ( 4.Ohm , 100.watt ) Need Condensator 47.Mfd , For Tweeters Need Condensator _ 3.3 Mfd , .... Thanks For Sharing , ..... Cheerio.🌠👍👍👍🌠🌠🌟🌠🌠.
U can’t use dc capacitors in a output of a amplifier output from a amp is AC. U must use bipolar capacitors or you will blow your speakers and amplifier
Yes you are right
The middle driver is a (full range) driver while the right one is a toy or tv speaker, often full range minus the bass.
Your music background make your video not good.
Mantap sekali
Man i really love my "Twitter" crossovers
You r using capacitor for midrange spk. You should use low pass filter or crossover for subwoofer. Don't use irritating background music which ends with headache.
4 ohms mix with 8 ohms for sure u will burned the amp, distortion sound! meaning the amp is pushing lot power to the 4 ohm speaker
Thats what im thinking too... 200 watts with 100 watts.... There will be a distortion on the sound
When I saw that he was mixing ohmage, I just had to finish watching the whole thing. 😂
That doesn't matter one bit the caps change resistance duh....have you never taken apart a home audio speaker or a bookshelf speaker......obviously not lol.
@@neverman3398 yeah...me to.
He just mixed ohm.
Deadly...😅
Nyc
I feel the Bass
Everything sounds like a tweeter from here
I know, you don’t know what you doing.
😁
Switch the wires around in that music drives me nuts OMG I feel like I'm in a circus
Nice 👍🏻👍🏻 🇮🇳 || Kuki
That is 20 watts sub plus 10 watts right
Tweeter left from the chat
Question. What's the black thing your using for soldering?
Paste
Apakah capasitor itu bisa di pakai untuk semua jenis speaker (besar maupun kecil)
Hi are u in India.? From where did you brought 200 watts lg speaker?
That is a wofer mid range speaker and tweeter a network is a must for good quality sound
woofer
👍
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
Use aligator clip or solder it
Does the wattage of speaker depends on how much uf u put ?
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
What a greate video bro I much like your video
You got the wires crossed that's why all the music gets lower when you connect all the speakers
Great
Nice video. By the way, what's the name of that stuff that you use to clean de soldering gun? I can't remember it now and I need it, but first I need the name. Anyone can help me out please? Thanks
Fluxs
It's soldering flux. It's in the paste form packed in small sheet metal container.
Available in electronic components shop.
Based on the speaker crossover bass coil output of 300w, how many mh is the air core coil?
a los medios de📢 22mf 33mf y a ese tweeter 📣1.5mf 2.2mf saludos 😀
Preciso de indicação do(a) Senhor(a), para um circuito ATIVO TRI WAY e ou TREE BAND AMPLIFIER, baixa potência. Esclareço: - três circuitos independentes com seus 3 amplificador operacionais, fonte SIMÉTRICA comum a eles, circuitos quase iguais e sintonizados ou filtrados por R/C simplificadamente na entrada de áudio. Veja que não é Pré. É simples, mas é Amplificador e sem potenciômetros nas tonalidades. .Por favor. Muito obrigado.
hey ,you used a 200w 8ohm woofer 4 a 100w 4ohm mid and a 3w 6ohm tweeter , what is the end ohm value as you connected everything in parallel ?
I don’t know what it works out as but I know that’s a ticking time bomb 💣
1:34 right word: together wrong word: togather
Hey bro i like ur video where did you buy the 200w speaker?
Something like them come in Sony 5.1 home theater system...are even j.v.c gig a tube stereo system -
4x 8" subs and mids
Dose that work with car audio I know it works on house speakers
As though I have no total knowledge to combine either this Stereo or worse the Mono circuit systems
I have a cuckoo clock melody circuit that is connected to the 8ohm 0.5w speaker and I want to replace it with the 8ohm 1w speaker. When I connected it the output was not that much great as the 0.5w speaker. What will change do I need to do?
look at the SPL [efficiency
What's the name of the subwoofer is used in this tutorial?
He name's Bob
would that circuit make overload the amplifier? i would rather stick to 8 ohm method. Rather than this kind of circuit.
Please write circuit diagram to more understand for...
How is it the speakers are always in the open and no enclosure while testing.they are bottoming.please explain.
He connected capacitator parallel to speaker?
It's so cool, man
Bro in hand assemble woofer how we know the moms and watt pls explain
if i make two of this sets what elsd will I need to create stereo (left right speaker set) that I can connect directly to my 3.5 mm jack audio output from my smartphonr?
You would need a head unit to separate the channels and be able to control both amplifiers
In the thumbnail; did you mean to say 'Twitter'??....cause it's Tweeter.... 🤷♂️
Make sure they are not polarized
boss ask k lng may idea k n 12" speaker n mdyo mura lng pro ayos ang quality,,,,salamat
Thanks for the video, very educative, but next time you can use something called cropping to make it shorter
my son like speakers and sound system
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
😂😂😂 у тебя среднечастотник УЖЕ как твиттер работает😂😂😂 зачем ещё один?
Owner left the group
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
I didn't know there was a "medrance" speaker, what is it for? Does it dance in a trance the medrance?
electronicshelpcare.net/led-music-level-indicator-circuit-diagram/
i need a 3way crosseover . my speaker is eminence DELTA 12 FA ,and i have use Mid section a Ahuja horn unit and HF driver is L acoustics [10 ohms]
LF Frequency 100 Hz to 2 Khz
Nominal Impedance* 8 Ω
Power Rating*
Program Power 1000 W
Watts 500 W
MId 800 Hz to 6.5 Khz [ Its need a extra volume knob ]
Impedance: 16 ΩInput Power: 40W RMS/60W Max.
HF 7000 to abow [10 Ohms]
I expecting you do needfull
Tweeter 4,7 uf ac capacitor! No use dc capacitor!! By italy
He used a non polar capacitor 🤷♂️.
100v, 1.5uF non polar capacitor.
Salam berkunjung
Can anyone tell the name of the music he was playing through the speaker?
Can you make the tweeters resist more watts adding a resistance?
No way.
Adding a resistor will just drop down the voltage going to it
Ademas de todo lo anterior, estan conectdos fuera de fase.
subwoofer modul no.?
In midrange itself treble is coming
Correct and his missing the low mids that the midrange speaker 🔊 can produce. Also it’s not a good idea to mix ohms on speakers. lol
I want the equivalent circuit for speaker
Pls.i need it
Sir i have kenwood ksc-sw50 how i attach vocal kindly
Background music not comfortable
What is the Circuit board name?
Subwoofer Brand? And model?
1st comon finally 😌
Dos de1.8 uf 400 V funciona?
sir 40 watt 4 ohm ke sat kitne watt ka Tweeter lagane chahia
next time use alligator clips its much easier
No creo que de 200 w. A lo mucho 50.
Crossover of a 5 way speaker?
Instead of putting music u could have been explained better, share ur knowledge, this is for all who putting background music in u tub.
Please visit here for more circuit diagram
www.pinterest.com/electronicshelp/pins/
बोल कर वीडियो बनाया करो प्लीज हम आपका वीडियो देखते हैं
Ah, the TWITTER
But the bass have Midle to. Bass is Bass midle is midl and High is high and 4ohm and 8 ohm parallel is 4ohm and to mutch
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
এল জি উফার স্পিকার টা কোথায় কিনতে পাওয়া যাবে ?
Es el ejemplo mas bravero, valemadre, inseguro, es lo que no debemos de hacer, si vas a hacer un video favor de hacer las conexiones de manera profesional o mínimo decente no estas porquerías.
LG subwoofer 200 watts lol.don't think so.
Hola🤔 vosotros. Tened una woofer, una mediorange, y una tweeter, creo que y pienso que si pones a la woofer una bobina pasa grave o bajo sola, y al medio un filtro de 22uf,33uf, 68uf y tapa los orificios de las canasta y a la tweeter 3.3uf o 4.7uf todos de 200 a 250 vatios le va bien vale
you didnt even know what the hell you are doing 😂
😂
Tooooooooooooo true! It is a real clown show