why lift the saw in parallel, if you can put a loop and lift it in the same way as adjusting the depth of the cut in the saw itself. It will come in handy for another device, but for a saw it's like a fifth wheel for a car.
Mind blending simplicity. Giving me ideas for my upcoming table saw build. I will be avoiding welding but the deconstruction of the saw and using a lift mechanism definitely great ideas to adapt. Can't wait for part 2!
Vallahi agzim acik kaldi, haberlere baktigimda gördugum tek sey bizim millet kafasi sahtekarlikla calisiyor, kafasini böyle guzel ve yaratici islerle kullanmasini görmek beni gururlandiriyor. Emegine saglik, bir takipcin daha oldu.
Nachdem ich den Zylinderschleifer nach deiner Anleitung gebaut habe, habe ich Lust bekommen, aus meiner alten Kreissäge demnächst eine Tischkreisäge zu bauen. Was mich noch ein wenig abhält ist die Lautstärke eine normalen Kreissäge. Aber der Weg ist das Ziel. Schaue immer wieder gerne bei Dir rein. Mach weiter so.
Semplicemente uno dei migliori workers . Ogni lavoro unisce praticità, efficienza e semplicità. La condivisione delle sue idee è encomiabile . As always bravo!
These videos are great. I watch them for the pleasure of a job well done. That said, I am far from the perfection of his work and I don't dare to start such a construction because the parts are expensive and I don't have the complete tools needed for this assembly. So, I'm watching for pleasure and congratulations to Gökmen!
So awesome! I am building my tablesaw station at the moment to. Using an old tablesaw and modifying it. Uploaded the first video last friday. You are an inspiration to many of us! Thanks for sharing!
Ellerine sağlık ustam. nasıl yapabilirim diye düşünürken pat diye karşıma çıktın yine. :) ben dişlileri ahşaptan yapmayı hesap ediyordum. Emeğine sağlık.
@@РашидОзов-я9ъ Да, по его роликам я собрал верстак. Теперь вот попробую такой подъемник забацать. Мне идеи его нравятся. А в гараже места мало. С его идеями можно всё компактно сделать. Я люблю всякие приблуды в гараже делать. Хобби такое.
Good afternoon! Your project turned out really well. In time 5:47 you show 2 axes with bearings that will make the saw go up and down. Would you be able to share the measurements or link where I can buy them? Thanks in advance and congratulations on the project.
Excellent! Well thought out, well designed, and clearly videoed. One small criticism; screws into the edges of plywood is bad practice. The ply is inclined to delaminate, and release the screws. Solution; bore a larger hole, and glue in a solid wood plug, and then screw into that. The last thing you want, is the assembly disassembling itself during use! 😊👍
Congratulations, friend! I think it is one of the best projects in that modality ... for its technique and great cleanliness at work ... Too bad in my country ... being so hard to get some elements but its final work is brilliant ...I loved it... Ahead!!!
One of the best mechanisms of its type that I've seen on TH-cam! Only a small suggestion regarding your band saw, if I may. I would place a guard over the exposed running blade for safety reasons.
Gracias!! Justo lo que estaba buscando. Lo felicito, qué talento Dios le ha dado, Gloria a Dios! Dios le bendiga por compartir. El Señor pronto viene, ore a Dios en El Santo Nombre de Jesucristo de Nazaret. Ya activé la campanita. 🤗
Absolutely amazing method of adjusting height of saw. I would like to know whether the saw maintains it's height under pressure, eg. when the saw is cutting the wood, is there any change in height, as the only thing holding it there is a thread (which can wind/unwind under pressure) Would you still need to lock the saw off? Thank you. great design.
@@Vasiliy_Aliev линейный вал #Aliexpress 127,88 руб. 18%СКИДКА | 6 мм 8 мм 10 мм 12 мм 16 мм линейный вал L 100 150 200 250 300 350 400 500 600 700 мм хромированный линейный рельсовый круглый стержень для 3d принтера a.aliexpress.ru/_eKaplE Держатели #Aliexpress 61,52 руб. 19%СКИДКА | Горячая 1 шт. SK8 SK10 SK12 SK16 SK20 SK25 SH8A 8 мм линейный шариковый подшипник рельсовый вал боковые блоки поддержка XYZ Таблица CNC 3D принтер Часть a.aliexpress.ru/_eLbnzw Линейные подшипники #Aliexpress 646,28 руб. 6%СКИДКА | 4 шт. SC12UU SCS12UU SC12 SCS12 12 мм линейный подшипник блок Подушка блок с ЧПУ части a.aliexpress.ru/_eMAgsy
The accuracy is not up to the mark of course, but we are not launching a shuttle into space, and, quite, it is VERY fit! 👍 Я из России, перевод через онлайн сервис. Так что, как то так... 🤗
Очень хорошая идея, по сравнению с фанерой по фанере. Единственное, лично мое мнение: смолой и опилками будет забиваться механизм подъёма. Как механизм поворота будет изготовлен? Очень интересуюсь!
Good work, I also have it that way, although I don't disassemble the angular screwdriver, with the two holes that it has on the sides it can be held very well with two angles. I have also used the same system for the router table
Could somebody explain to me why 7
people would give this a thumbs down this is genius can’t wait to see the rest of it what an amazing worker 👍🏼
They do not value such a great idea and achievement
bugüne kadar gördüğüm en temiz en basit ve en mükemmel mekanizma zekice akıl dolu sizi canı gönülden tebrik ederim Gökmen bey
why lift the saw in parallel, if you can put a loop and lift it in the same way as adjusting the depth of the cut in the saw itself.
It will come in handy for another device, but for a saw it's like a fifth wheel for a car.
Парень, у Тебя Золотые руки! Лайк однозначно!
Просто в восторге как Ты умеешь подать материал!
Круто!!
Gökmen Usta Part 2 yi merakla bekliyoruz..
Çok iyi bir mekanizma oldu.
Tam bir usta işi.
Eğitici bir video keyifle izledim.
Kolaylıklar dilerim.
Ustam bizden birinin böyle işler yapması gurur verici...
Genius idea, to use the corner-gear of the drilling mashine. Waiting for the next part!
Mind blending simplicity. Giving me ideas for my upcoming table saw build. I will be avoiding welding but the deconstruction of the saw and using a lift mechanism definitely great ideas to adapt. Can't wait for part 2!
Совершенству нет предела), ждём продолжения 👍👍👍.
Vallahi agzim acik kaldi, haberlere baktigimda gördugum tek sey bizim millet kafasi sahtekarlikla calisiyor, kafasini böyle guzel ve yaratici islerle kullanmasini görmek beni gururlandiriyor. Emegine saglik, bir takipcin daha oldu.
До чего же есть умные люди, все станки приобрел не выходя из дома.
Nachdem ich den Zylinderschleifer nach deiner Anleitung gebaut habe, habe ich Lust bekommen, aus meiner alten Kreissäge demnächst eine Tischkreisäge zu bauen. Was mich noch ein wenig abhält ist die Lautstärke eine normalen Kreissäge. Aber der Weg ist das Ziel. Schaue immer wieder gerne bei Dir rein. Mach weiter so.
Elinize saglik titiz calismalarinizdan oturu sizi tebrik ederim
Semplicemente uno dei migliori workers . Ogni lavoro unisce praticità, efficienza e semplicità. La condivisione delle sue idee è encomiabile . As always bravo!
These videos are great. I watch them for the pleasure of a job well done. That said, I am far from the perfection of his work and I don't dare to start such a construction because the parts are expensive and I don't have the complete tools needed for this assembly. So, I'm watching for pleasure and congratulations to Gökmen!
Glad you like it, thanks my friend😊
That's the finest, detailed and most simple solution for the Lift-Mechanism i have seen so far. Thanks for sharing! Very good Job.
As always, outstanding! A master of wood working. The simplicity of your design is highly commendable !
Как всегда ВАШИ работы и идеи великолепны! !!Удачи и успехов вовсех делах.
Шикарная робота👍👍👍
Надеюсь и я когда нибудь смастерю себе такую вещь.
Excelente trabajo; muchas gracias por compartirla un fuerte abrazo desde lima- Peru...sigue adelante amigo...!!!
As always a great job. Of all the videos I watch, when I get a notification of yours I stop everything view it first.
That is so beautiful and simple, brilliantly, well done
Yine müthişsiniz.tebrik ediyorum. Sevgiler
So awesome! I am building my tablesaw station at the moment to. Using an old tablesaw and modifying it. Uploaded the first video last friday. You are an inspiration to many of us! Thanks for sharing!
Look out! Genius at Work!!
Гений! И руки золотые!
Mükemmel bir çalışma olmuş ellerine sağlık. Bu çok işime yarayacak teşekkür ederim. 2. Bölümü sabırsızlıkla bekliyorum. Kolay gelsin.
Ellerine sağlık ustam. nasıl yapabilirim diye düşünürken pat diye karşıma çıktın yine. :) ben dişlileri ahşaptan yapmayı hesap ediyordum. Emeğine sağlık.
Це суперово! Я вже скільки переглянув варіантів, і цей найліпший!!!
Excellente vidéo👍👏👏👌 Vivement la suite !!!! Norbert (France)
The best one I've seen on TH-cam so far!!! Great job!!!
Like definitely. A great idea for raising the saw on the table, I look forward to continuing.
Ну что сказать? Ты лучший! Спасибо! Класс! Уволок себе. Буду делать.
Что ты будешь делать? Что это такое? В стол монтировать?
@@РашидОзов-я9ъ Да, по его роликам я собрал верстак. Теперь вот попробую такой подъемник забацать. Мне идеи его нравятся. А в гараже места мало. С его идеями можно всё компактно сделать. Я люблю всякие приблуды в гараже делать. Хобби такое.
Muchas gracias por compartir con detalle los talentos que Dios le da
Nice project for the hobby wood work shop. You are a great genius
Добрый день. Прекрасная работа. Я себе постараюсь сделать такой же. Браво!
Love how things are magically welded and it's sped up to look like this guy moves super fast without making mistakes. Boss
Thanks for sharing that, well done!
Perfeito seu trabalho... parabéns.. ficarei esperando a outra parte
That's a very ingenious idea you have there. Great job...
Great! This time you have overcome. Impatient to see the second part ...
Good afternoon! Your project turned out really well. In time 5:47 you show 2 axes with bearings that will make the saw go up and down. Would you be able to share the measurements or link where I can buy them? Thanks in advance and congratulations on the project.
Класс! Ждем продолжения!
Çok güzel iş, elinize sağlık.
Impressionnant -- Félicitations 👍👍👍👍😉
Красивая работа)
Приятно смотреть, все чётко)
Üstad nerelerdesin sen ya :) Eline koluna sağlık.
Ingenious! Getting ready to watch part 2.
Excellent!
Well thought out, well designed, and clearly videoed.
One small criticism; screws into the edges of plywood is bad practice. The ply is inclined to delaminate, and release the screws.
Solution; bore a larger hole, and glue in a solid wood plug, and then screw into that.
The last thing you want, is the assembly disassembling itself during use!
😊👍
Can you send photos with the procedure mentioned?
Tek kelimeyle mükemmel 👍
🙂
I've been here coz of part2 it's so interesting to me! 😀 Thank you for bring it here.
Congratulations, friend!
I think it is one of the best projects in that modality ... for its technique and great cleanliness at work ...
Too bad in my country ... being so hard to get some elements but its final work is brilliant ...I loved it...
Ahead!!!
Отличная идея 👏👏👏 однозначно Like 👍👍👍👍👍.......
Very very good idea
Great video, Excellent project.
офигенно братан! РЕСПЕКТИЩЕ!
One of the best mechanisms of its type that I've seen on TH-cam! Only a small suggestion regarding your band saw, if I may. I would place a guard over the exposed running blade for safety reasons.
Gracias!! Justo lo que estaba buscando. Lo felicito, qué talento Dios le ha dado, Gloria a Dios! Dios le bendiga por compartir. El Señor pronto viene, ore a Dios en El Santo Nombre de Jesucristo de Nazaret. Ya activé la campanita. 🤗
Çok hoş bir sistem olmuş :)
Salam Aleykom Comrade this is the best solution that I have seen on the Internet. I will try to translate your idea into Metal
Светлая голова и умелые руки ! Молодец !!!
Super, excellent, amazing. You are a genius, my friend.
Spectacular improvement of the lift mechanism. Great job!
Good idea and nice work ! 👍 👍
Müthiş, Harika, Süper...
Nice work as usual ! Keep on !
Eline sağlık, Tebrikler!
Very beautifull system
Very nicely done. Do you have a video on your bandsaw? That looks very interesting. I admire someone who makes his own tools.
Thanks, You can watch the video of my band saw here: th-cam.com/video/lraBBqqDUPY/w-d-xo.html
All these tools you make are incredible. I will definitely be copying for my shop!
Parabéns, muito criativo e bem construído seu sistema de elevação, aguardemos os passos seguintes.
As always, awesome!!!
Awesome Mate👍👍👍
You are a very cleaver man, in fact you da man, well done
Genius Idea - Well done!
Abi sen müthişsin gerçekten, Allah razı olsun, işlerin bereketli olsun.
terimakasih ilmunya om....👍👍👍
this is the best presentation VDO I have seen , It clean and clear step by step , I recommended..
Hello Friend! Congratulations, mainly for the mechanism used to transform the horizontal movement into vertical ... Hugs!
The design is interesting, for such a saw is applicable
MUCHAS GRACIAS POR COMPARTIRNOS TUS EXPERIENCIAS Y TUS PROYECTOS . TODOS VERDADERAMENTE GENIALES BENDICIONES
Отличный механизм, молодец!!!!!!!
Absolutely amazing method of adjusting height of saw. I would like to know whether the saw maintains it's height under pressure, eg. when the saw is cutting the wood, is there any change in height, as the only thing holding it there is a thread (which can wind/unwind under pressure) Would you still need to lock the saw off? Thank you. great design.
Отлично придумано, мне очень понравилось. Буду делать так тоже👍👍👍
и из чего направляющие делать собрался
@@Vasiliy_Aliev на алиэкспресе заказывал линейные подшипники и валы на 12 мм Думаю, будет достаточная жесткость. Ведь они там короткие!
Винт надо использовать, вместо шпильки, будешь долго крутить вручную.
@@samodelkin58 а ссылку можно
@@Vasiliy_Aliev линейный вал #Aliexpress 127,88 руб. 18%СКИДКА | 6 мм 8 мм 10 мм 12 мм 16 мм линейный вал L 100 150 200 250 300 350 400 500 600 700 мм хромированный линейный рельсовый круглый стержень для 3d принтера
a.aliexpress.ru/_eKaplE
Держатели #Aliexpress 61,52 руб. 19%СКИДКА | Горячая 1 шт. SK8 SK10 SK12 SK16 SK20 SK25 SH8A 8 мм линейный шариковый подшипник рельсовый вал боковые блоки поддержка XYZ Таблица CNC 3D принтер Часть
a.aliexpress.ru/_eLbnzw
Линейные подшипники #Aliexpress 646,28 руб. 6%СКИДКА | 4 шт. SC12UU SCS12UU SC12 SCS12 12 мм линейный подшипник блок Подушка блок с ЧПУ части
a.aliexpress.ru/_eMAgsy
It 's very nice idea tanxs so much bro
Hi...saya suka sekali pekerjaan kamu, sangat bagus!
Great job! Thanks for your ideas
The accuracy is not up to the mark of course, but we are not launching a shuttle into space, and, quite, it is VERY fit! 👍
Я из России, перевод через онлайн сервис. Так что, как то так... 🤗
You Sir inspire me !!!!!!
Excellent 👏👍👌💯😍😍🌹
super boulot!!! efficace rapide et plus facile a faire par nous-même que les autres videos!!merci!!
Absolutely concept, thanks a lot for your sharing
Parabéns,você é o melhor,um grande abraço!
Good work ✨ ✨ 👍
Projeto lindo e limpo, era o que queria 🤙
obrigada, que bom que gostou 😊
Simplesmente magnífico. Parabéns 👏
que bom que gostou, obrigado meu amigo 😊
This is a very cool system.
Можно проволоку намазать любым маслом и не надо обводить карандашом очертания пилы или другого инструмента. Хорошая работа👍, спасибо за видеоурок!
Очень хорошая идея, по сравнению с фанерой по фанере. Единственное, лично мое мнение: смолой и опилками будет забиваться механизм подъёма. Как механизм поворота будет изготовлен? Очень интересуюсь!
Good work, I also have it that way, although I don't disassemble the angular screwdriver, with the two holes that it has on the sides it can be held very well with two angles.
I have also used the same system for the router table
Wow, just wow. Super, bravo.