ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- In this video I show you the steps to take apart an iPad 6th Generation Screen. Do this repair at your own risk, it is not the easiest of repairs. Always use goggles to protect your eyes, and gloves. Be very careful with all flex cables on this ipad
How much would this be if u took it in to a repair place?
Repair places usually charge between $90-$150, depending on quality of the screen
I paid 160$ for a repair because I couldn’t get to the apple store because of COVID restrictions, the screen was not glued on properly, and it’s already dead (it’s been about a month and it have touch glitches)
Sorry I’m on my wife’s account but I need your help bro please I took in the responsibility of “fixing” my bro in laws iPad because it wouldn’t start up and I took it upon my own thinking that it needed a new screen replacement and digitizer. When taking the screen off I cut all the wires including the home button wire so my question is does the home button come with the replacement screen ? Or any wires at all? I need help
Hi there, I am sorry to hear about that frustrating experience. You can actually buy the screen with the home button included, BUT the Touch ID function will not work. Only the original button will allow the Touch ID function to work. It will function as a home button though. Those other 2 cables are part of the digitizer anyway, no worries there. Let me know if you have any other questions.
Can i use a 3d printer hot bed to heat the ipad? What temperature should I use?
I dont see why not, I would keep it at about 160 degrees Farenheit, for about maximum of 10 minutes
Or until hot to the touch
I spilled some cleaning product on my iPad and the screen is cracked it has seeped through onto the digitiser but it seems to work ok exept a light discoulration where it landed any advise?
The discoloration most likely means the lcd is damaged, you may need to change that as well as the digitizer.
@@techfix8198 new lcd digitiser and screen how much could that cost cause I was quoted 190 for just the lcd and screen
is it possible to just remove the tempered glass and not replace it
No
Where did you get the display from
Did you tape over the sensors? If you did does the color of tape matter?(clear, red or black)
No, you should not tape over the sensors. I use clear red roll adhesive, but I don’t believe that the color matters, I’m more concerned with the strength of the adhesive
Where you got the new screen & tools required?
The new screen can be found here, gadgetfix.com/category/galaxy-note-10-1767.html. The tools can be found in the same website.
Thanks
You’re very very welcome
Can u restore my ipad? Display issue 🥺 display lines came and not working
Display lines sounds like the lcd is damaged, a restore wont help unfortunately. Most likely you need to change the LCD on it
Thanks cause I sat on my sisters iPad and I broke the whole screen
I’m very sorry to hear that, you should have her pay for it lol
the ipad i fixed was dead when i first started taking off the broken screen and stuff. and i put the LCD back on to test it the power button wasnt making the dead battery icon pop. would an over night charge help or did something happen to the LCD ? all the cables for both the LCD and digitizer are intact
Interesting problem, try doing a hard reset by holding the power button and home button for 15 seconds or until apple logo shows. Let me know how it goes.
@@techfix8198 I tried it already and nothing happened I have the dang problem
@@techfix8198 same I need help
@@avion823 make sure the battery cable and lcd cables are all the way plugged in had the same problem I got two gen 6s and fixed both
Bro what’s he cost of screen ?
approximately $20 for the digitizer, the LCD is a different price
How long did this took?
Approximately 1 hour
I feel like that's my iPad
Maybe it is you never know lol.
No details?
What kind of details are you looking for?