From an aircraft mechanic, each and every one of those starts was a flame out and subsequent conditional inspection. (meaning intensive after a hazardous condition) Gotta spool before introducing fuel. No wonder they had leaks after the first few runs. I'm just glad that nothing went boom and everyone's safe. (except Seth, RIP) Titanium blades at 30,000+rpm do not fuck around when sent to mf low earth orbit.
See those holes on the very back flange? Those are for the bolts that attach the jet pipe and final nozzle that accelerates the exhaust gases to give the rated thrust of the engine. The books call it the jet nozzle. It will about double the thrust you are getting now, running the tail cone without the jet pipe and final nozzle assembly. It will add about 6 feet or more to the whole thing, but the jet pipe is just a cylinder, so you could bolt the nozzle straight to the tail cone. That's the kind of thing you would do, eh? That little engine will easily make that truck go over 200 mph. With a final nozzle. On the salt flats, not the roads...
@@edbrown2061Yes it would be faster with something like a bell mouth around the inlet. But a nozzle would be a much more significant increase in thrust.
I have the same exact M701 turbine in the back of my small pickup (its a V8 aussie ford falcon, about the size and design of a USA Ranchero or El Camino) You need to fit the nozzle. Without it, you're only getting about 1/3 of the power. You also need to get the intake into the airflow. The smoke is from using diesel. Your starts are terrible. Bring the turbine up to Max rpm on the starter (you're giving it 24 volts right?), turn on the igniter, then turn on the fuel. Keep the starter running for another 15 seconds to help the turbine spool up to idle speed. There should be minimal - zero flames out the exhaust when you start it I burn 20 litres a minute, with 80 litre fuel cell.
@@hanuman9the pickup has 70 litre petrol tank, so about 500km range on that The turbine is just for fun when the boys are on the piss and for occasional use at the drag strip (dual power, V8 + turbine = max fun)
HEY Cody. Just so you know i know its for fun and stuff but you should use duct work to rout air from the sides of the cabin to the inlet compressor. When you are at any kind of speed your power will be multiplied, because right now it is just scraping by on what air it can pull from around. Personaly I would use rectangular duct pipe for home use and have a s curve from each side with a decant opening like 3X12 inches. Have the whole thing enclosed you could in encorperat a roof scoop like you preposed in the video but for maximum power i think that would not be enough. So i would probably do roof and sides. you would have to relocate the fuel canister. and you could also paint it all red to blend in thing would be sick. Hope this helps!
@@Platinum_phoenix 7k if they are 32 years old and beat up. A nice kei truck at or around the 25 year age limit for it to be street legal that's really straight and clean runs 12+
@@mjtt12 Kei trucks are worth about $2K. They have extremely limited use and capability, almost no towing capacity, ridiculously bad handling, and horrible safety ratings. I don't even wanna go into the fact that you don't wanna spend more than an hour in one of these, while with a proper sized pickup truck you can take the whole family on a road trip in comfort. I never understood the fascination with these claustrophobic tiny death traps. Might as well buy a go kart. And I live in the EU btw, for me its proper sized real American trucks all the way.
@@scottyingham3348do you mean when he was looking at the shifter? he was probably making sure it was in neutral lmao. running this engine and shifting the stock trans would not work. shifting is based on engine rpm not wheel speed.
@@tuningbytokyo I understand how shifting works. On the outside shot you can see the suspension unload/load like he’s grabbing gears, then the inside shot you see his arm move like he’s shifting.
I'm blown away by a few things. 1, you actually did it safely 2, the build was clean 3, somehow the paint on the tailgate didn't discolor or peel from the jet!? Crazy.
Nothing about it was safe. using jet engine on road especially with no breaks to handle such speed and weight is opposite of safe. That little truck even unmodified is unsafe on USA/EU roads it's designed for small villages in Japan where nothing bigger can fit on local roads and top speed of 30km/h. There is absolutely zero crash protection in it so if that jets throttle gets stuck everyone inside is dead meat. It may looked safe but it probably was most dangerous thing they did.
@@bmint yea the kei trucks arent safe even without modification. look it up , the producers of the kei trucks even admitted they cheated to get trough the safety tests im not sure if there is a law suit right now in japan.
How cool would it be if Cody bought the replica Batmobile aka the tumbler. He’ll never see this comment, but the joy/content it could bring would be priceless.
@@Flashtone08 the only thing necessary in a jet truck is a fireproof suit. But it’s a k truck, so you can’t fit in with helmets and suits. The team probably had to leave that idea. Because who cares. But it would still be nice for them to have a roll cage in that truck, tbh.🤔
Me in EU: "Sir, you've put an oil catch can on your car, that's an engine modification and you have to pass technical inspection to be able to drive your car on public roads" WhistlinDiesel in USA: "Jet Engine goes BRRRRRR"
Come to the Netherlands, our taxes suck but you can do everything to your car. Add a turbo? No problem. Air suspension? Sure. Roll cage? Go ahead. Don't need any paperwork for it. Want to put a different engine in an older car? €50 inspection and it's done.
@@NoctisIgnem taxes are another thing, freedom to do whatever you want to your car is a human necessity. Screw EU countries wIth strict TUV inspections, they don't do anything better than us, i laugh at them. 😂
There are rules and regulations but no one cares. +15HP you have to go for a inspection. But who does. Had a Cinquecento for years. Imported with original motor and turbo back then. They didn't even marked any paper for that. Upgraded it for a 1.2L with bigger turbo setup back then. Who would know 😅 Have a Own made exhausted on my car now, chipped, open air intake, lowere, bigger wheels and yes a oil catchcan. (swift sport 2012) Didn't see any official for that too 😅
Btw Don't forget that your insurance can have a reason not to pay anything after an accident. That's the biggest risk. Even changing some electrical wires or anything on your car.
Looks like you don't know how to operate a jet engine, which is why it's smoking and throwing fire, or maybe you know and you were just doing it wrong to make a fun video, idk. But anyways, here are a few tips to operate a jet engine: First, the startup procedure: make sure the fuel is off and the throttle is at idle, under no circumstances should you open the throttle when starting the engine, or you'll just create a big flamethrower. Once you're sure everything is set for startup, turn on the igniters, wait around 10 seconds, and then turn on the starter motor. Wait until the engine revs up and stabilizes, typically between 10-20% NG depending on the engine, if you don't know the exact number, waiting longer is always better than waiting less. When it's stable, you can turn on the fuel and watch the ITT (internal turbine temperature), it should not enter the danger zone, the specific limit depends on the engine model. According to your dashboard note at 10:33 , it's 850 for your engine, if it reaches the maximum, you could damage the engine in just a few seconds (you might have already damaged it there), so, monitor the temperature closely, and if it approaches the limit, cut the fuel instantly. This situation is known as a "hot start," which is rare but can happen. Usually, it indicates insufficient airflow into the engine, if that happens, the next startup, leave more time before opening the fuel so the engine revs up more, and it's less time at low NG with the fuel on. When the NG percentage is over 50%, you can consider the engine on, and you can turn off both the starter and igniters. It should stay around 50-60% NG while idling. Wait about a minute for it to stabilize, after that, you can start playing with the throttle. When moving the throttle, ensure you don't overload the engine by keeping an eye on the NG, it should never exceed 110-115% for most turbines, moving it too quickly can easily overload an ungoverned engine, so be careful with the throttle. Also, monitor the temperature, it should never enter the danger zone (over 900 according to your dashboard note). Since this is a slower setup than the intended use of a turbine, it'll reach the danger zone quickly, so keep an eye on the temperature at all times and be ready to reduce the throttle. Don't worry too much about torque readings; you can't over-torque the turbine at car speeds. To avoid smoke, don't move the throttle too quickly, always take around 10 seconds to go from idle to max power (max power means around 110% NG, not fully opening the throttle), in an ungoverned turbine, you should never fully open the throttle on the ground if you want to avoid damaging the engine. That's why it was producing so much smoke, you overloaded it, which means the fuel didn't have enough time to burn, resulting in smoke. It's the same as in a diesel engine that's injecting more fuel than it can burn, leading to black smoke in the exhaust, which in a diesel truck can look cool, but in a turbine, you can seriously damage the combustion chambers. Shutdown procedure: wait around 30 seconds with the engine idling, and after that, simply turn off the fuel, it's as easy as that, there is no secret to shutting down a turbine. Other tips: Never turn the igniters on with the engine running, except in heavy rain when it's reducing the ITT too much, there is no reason to turn them on, it won't give you more power. When you shut it off, let it cool down about 10 minutes before starting it again. If you had cut the fuel for any reason, never open it again, you have to do all the starting procedure after letting the engine cool down. If you open the fuel again, it won't burn, and if you turn on the igniters with raw fuel in the combustion chamber, the engine can literally explode (it will be a fun way of destroying it, just saying). During startup, you generate a lot of heat, and if you don't wait for it to cool down for around 10 minutes, you could easily have a hot start. In this setup, it's complicated, but next time, try to ensure a clean air source for the jet engine intake. Don't place it on the bed of a truck just a few inches from the cab without good airflow, it will overheat more easily. You can add ducts to redirect air into the turbine when going at speed if there's no other place to install the engine. Remember that the more air the engine receives, the more power it will make without overloading. Also I don't know your engine model, but looks like you are missing the rear nozzle that accelerates the exhaust and it's what really makes the power, try finding one for your engine to have more trust, I'm almost sure it should have one. Knowing all this, you can have fun while being safe. You won’t smoke other cars, and that engine will last forever. Cheers from a turbine mechanic. Keep up the good content!
Tail Number N5150 - 5150 is a Code that allows for the involuntary, temporary psychiatric detention of individuals who are deemed a danger to themselves, a danger to others, or gravely disabled due to mental health conditions. Commonly referred to as a "5150 hold" - "N" keeping in tradition of FAA tail numbers
oh yes, i was gonna say the motor companies made a turbine powered car before and it was awesome. then they destroyed it just like the electric car they made years ago. good job WhislinDiesel! you are an innovator!
@@Survoler8competition.. Who can make the crazy k truck for a k truck Olympics. Jets got show power and speed. But 4x4 and big power would have better acceleration.
i highly recommend you fit some sort of air scoops that direct air into the engine from around the cabin, it would seriously increase high speed performance and decrease temps.
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart: Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen. I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole. God Bless Yall! ❤❤
The jet engine got stuck on full throttle in the merry go round video, so I’d be scared too if I was driving in a kei truck with no helmet with it This is probably before that happen tho
@3dforever. Well….The truck is imported from Japan so the speedometer Cody is staring at when driving is in km/h. The same km/h 99% of the world uses……
11:45 this whole clip is probably the most dangerous thing I’ve seen on TH-cam, but it’s so cool to actually see the inner workings as it heads towards a clean idle.
@whistlindiesel 13:24 Install a water injection kit and you can turn up the fuel controller for more power. It'll keep your ITTs down. They had em on old jets
@@azixbot as logical as that sounds I don't think youtube knows how to deal with something like this, it gets clicks so it flies. But if you post something 'tin foil hat' worthy then all the sudden they get really butt hurt
@@Silas-711 we have a story of Richard Rowlings being spoiled and shown in the wrong light by Discovery production team. He’s not happy about it. And I’ve also been watching the Gas Monkey show on Discovery first, thinking of Richard being a mean dude. Now I’m watching Gas Monkey TH-cam channel, and I have a different opinion. So, if it works on TH-cam, it’s not necessarily gonna work the same way on TV.🤔 We gonna get a different show on TV (not necessarily a better one), if the WD team does this for TV, I think.🙃
I personally know someone who put a helicopter jet engine into an old Chevy S10. He was doing 85mph up I35W south of Minneapolis. This was maybe 25-30 years ago or so. Last time I saw him he was putting a huuuuuge jet engine from a Mig into a bread van. I had never seen such a thing of beauty. I wish I had been able to keep in contact to see how that turned out. Without naming names, I'll say he was directly related to a guy who worked with Evel Knievel, as well as worked on the GoFast rocket in 2014. You can't do this type of stuff without connections, money, or both.
Shh he doesn’t want people to think he really cares about them 😂. But in all honesty despite all the crazy shit they do I think he genuinely does care about all their safety.
5:07 was one of the shortest clips but one the most incredible/insane/mind-blowing, it's just so picture perfect and meaningful too the longer you look at it
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart: Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen. I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole. God Bless Yall! ❤❤
@@TheRandompaintI have a honda acty (same truck as in the video, but mine is white and has no jet engine), the seatbelts is for comfort not safety lol no airbags and the crumple zone is your femurs. It's not safe for or meant doe above like 40mph (nvm that I take it to 55 to cruise on dirt roads weekly but that's besides the point 😅)
3:40 You missed the opportunity to have a ramp agent guiding your test flight.😢 The dude in orange jacket with orange sticks is something that this test run is definitely missing.🤔
As a aircraft mechanic i love everything that's going on here and I will donate my services if at any point you end up in South Florida. Also just an FYI most of the white smoke is under burnt fuel. In your configuration what might look sweet is a wet motor while driving. SPARK OFF. Sends a 30 ft fog out the back depending on jet engine size. What you need is an exhaust shroud. Preferably open that opens and closes using fuel like the fighters of today.
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart: Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen. I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole. God Bless Yall! ❤❤
Yeah fire department doesn't care unless it's a fire marshell and you're committing insurance fraud. They're just there to put out fires and save lives
That beginning cinematic on the sand.. okay you haven't forgotten your ways. Well done. Not the biggest fan of all these jump cuts but I know it brings in more tiktok brains. Beautiful cinematics though. 👌🏻
12:00 Guys, when you see sparks flying out the back of a jet engine, SHUT IT DOWN. those are metal chunks coming from somewhere. Compressing fuel and air won't create sparks.
The reason flames shooting out the back, is he doesn't know how to start that jet engine correctly. You suppose to turn off fuel, make sure throttle at idle, turn on igniters for a few seconds to warm up and give better chance of starting, then turn on starter let it spool up to RPM and then turn on fuel and starter will disengage and engine will run off fuel. Never turn up throttle when engine is spooling up. You effectively make a flame thrower that way and risk it actually exploding as well.
@hooniganruiz5613 No as watch his videos for many years and definitely fully aware of the destruction. The problem is jet engines is not something you F around with, especially being no protection as literally out in the open on a mini truck. The merry go around was insane he messing around with not being around much longer. It way different and way more dangerous then the videos he done in the past. It may seem cool, but it won't be when one literally goes unbalanced on him when he near it. It literally worst then Fing around and waving carelessly with a loaded firearm Bring an A&P and engineer I seen the damage caused when one becomes unbalanced and explodes. Being the way he has it mounted out in the open, a very real chance if the turbine comes apart, it literally can seriously injure or do worse to someone that around it. At least his monster trucks they are mounted below, and he high up, and he drives it on his private land. This is way more dangerous as it mounted directly behind him on a thin mini truck out in the open on the back of the bed, nothing sheilding it, that likely won't protect him if that engine comes apart. Plus, he was driving it on a public road, which is an absolute huge NO as he risks someone that behind, or on the side of him. I don't think he fully knows the risk involved with messing around with those jet engines like he is. He likely assume it be no worse than the trucks and cars he regularly destroys, thinking he can walk away from it and be ok. Those jet engines are a whole other league of it own and just take one mistake and not even a mistake could be a crack you did see and you or someone around it not going to be able to walk from it. Don't mess around with something that beyond dangerous you don't fully understand and essentially bring out to a public road. That very careless & reckless at that point. Not to mention you can end up in prison if something goes very wrong as well if he survived it.
@@thetechgenie7374this was one of the only videos of his that made me feel like if things go wrong, they will go really wrong. Too many things to list but out in the public roads was the most “this is over the line”. All the people behind him got hit with a cloud of smoke possibly causing a wreck behind him. I generally don’t care at all when he is blowing up his land, it’s too far when you endanger others.
@4huggies Yep feel the same way as love his other videos, as it material stuff, but this one is taking it too far. I'm glad he didn't attach the jet nozzle tube. Otherwise, it have way more thrust. I hope he doesn't try to push that truck any faster as it won't have enough down force to keep front from lifting which would be him crashing at well over 150 mph and over, he be unrecognizable stopping unexpectedly instantly at those high speed, there no walking away from that in that lightweight mini truck. Let alone other ways to crash would be tires would likely pop due to heat generate going that fast or brakes would fail. That trucks not design for that period. It was different with his monster trucks as was built and modified, and someone thought it out well enough. That mini truck is not even close and he end up hurting, or worst to someone, or himself.
I am proud to see kei trucks go this fast. Never in my life, when I saw these things all the time as a child (and now) would I have thought that those rinky dinky light trucks could go so fast.
I've been to Japan and seen a kei truck multiple times and once in America they are very interesting but reliable no wonder it's the number one farm truck for japan
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart: Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen. I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole. God Bless Yall! ❤❤
So, about the legality of driving a jet-powered truck on the highway... Anybody got any answers? 🤔 Asking for a friend who wants to install a jet engine in his MINI Cooper! 🚀😂
There were turbine powered cars in the 50s. Assuming you weren't smoking everyone out like a redneck homo in a brodozer, they wouldn't have a reason to mess with you...
Not really. The classic non FADEC controlled jet engines you just spin really fast and pump fuel in to them. That is why they are so reliable, much less parts for control.
@@rkan2I meant the engineering of putting this into a mini truck. He joked about giving them one hour start to finish, but I know how much work went into making this happen in reality.
Lmao I Had no idea wtf you were talking about and was looking hard as hell till I had to Google wtf MTB meant and then i saw the bike back there lmao shit made me feel stupid but I've never seen nobody say "MTB" but i guess i learned something new and useless today I guess right on LMAO
prolly handles so well bc all the hp is goin straight into acceleration and wont (really) have to worry about traction issues bc the cars in neutral, sick af
he obviouly needs to put reaper wheels on it, and then take it to antarctica and drive it on ice at 300 mph with the jet engine actually, a jet engine would work really well on ice, just put skis on a vehicle would need a special system to stop tho
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Let’s race for pinks
He gon lose
Cboys>
Make sure Evan isn't driving.
YES!! DO IT!!!
Omg the goats are here
Firefighter really said I’m not the law not my fckin problem 😹😹
fire fighter "was this thing on fire or smoking at any point?" me "well yeah, its a Rocket Engine.
TRUMP 2024
@fatguy45 MAKE AMERICA GREAT AGAIN 2024 trump 🇺🇸🇺🇸🇺🇸
@@fatguy45L
@@mr_gutsy5151L
I love how after these guys figured out how to get jet engines to work they just started putting them on everything.
it's like giving a 9 year old boy unlimited money and a team of engineers
@@remlap42correct. That's exactly what happened.
instead of ls the world its f16 the world
It's a guy thing 😂
From an aircraft mechanic, each and every one of those starts was a flame out and subsequent conditional inspection. (meaning intensive after a hazardous condition) Gotta spool before introducing fuel. No wonder they had leaks after the first few runs.
I'm just glad that nothing went boom and everyone's safe. (except Seth, RIP) Titanium blades at 30,000+rpm do not fuck around when sent to mf low earth orbit.
For all wondering. It's a M-701 engine from 1958. It used to power czechoslovakian jet trainer aircraft L-29 Delfin.
Thrust: 9 kN.
F414 is 110kn as far as I know if 9kN can do so much what 110kN could have done💀
@@sarthak2342turbines and rockets have gotten a many nerds kilt quickly over the years.
See those holes on the very back flange? Those are for the bolts that attach the jet pipe and final nozzle that accelerates the exhaust gases to give the rated thrust of the engine. The books call it the jet nozzle. It will about double the thrust you are getting now, running the tail cone without the jet pipe and final nozzle assembly.
It will add about 6 feet or more to the whole thing, but the jet pipe is just a cylinder, so you could bolt the nozzle straight to the tail cone.
That's the kind of thing you would do, eh?
That little engine will easily make that truck go over 200 mph.
With a final nozzle.
On the salt flats, not the roads...
Cody has to do something for the brakes first, better rubber would be nice too
Wouldn’t it be faster if they could get a clear path for the air to enter the engine instead of it being blocked by the cab?
Wassup
Put skis on it and run it on a frozen lake.
@@edbrown2061Yes it would be faster with something like a bell mouth around the inlet. But a nozzle would be a much more significant increase in thrust.
I have the same exact M701 turbine in the back of my small pickup (its a V8 aussie ford falcon, about the size and design of a USA Ranchero or El Camino)
You need to fit the nozzle. Without it, you're only getting about 1/3 of the power. You also need to get the intake into the airflow. The smoke is from using diesel. Your starts are terrible. Bring the turbine up to Max rpm on the starter (you're giving it 24 volts right?), turn on the igniter, then turn on the fuel. Keep the starter running for another 15 seconds to help the turbine spool up to idle speed. There should be minimal - zero flames out the exhaust when you start it
I burn 20 litres a minute, with 80 litre fuel cell.
4 minutes of gas? Should be enough to go from one major city to the next.
this comment makes me proud to be aussie
@@hanuman9the pickup has 70 litre petrol tank, so about 500km range on that
The turbine is just for fun when the boys are on the piss and for occasional use at the drag strip (dual power, V8 + turbine = max fun)
I applaud you, sir. amazing
@@Goodkiwibloke Any videos of it?
Put a jet engine on a ferris wheel
What a cool and original idea!
@@zjwilliams1991 is that sarcasm
Good idea
This many comments and this vid was posted 9 mins ago is crazy
Rockets.
HEY Cody. Just so you know i know its for fun and stuff but you should use duct work to rout air from the sides of the cabin to the inlet compressor. When you are at any kind of speed your power will be multiplied, because right now it is just scraping by on what air it can pull from around.
Personaly I would use rectangular duct pipe for home use and have a s curve from each side with a decant opening like 3X12 inches. Have the whole thing enclosed you could in encorperat a roof scoop like you preposed in the video but for maximum power i think that would not be enough. So i would probably do roof and sides. you would have to relocate the fuel canister. and you could also paint it all red to blend in thing would be sick. Hope this helps!
US regulators: Kei trucks are dangerous
WhistlinDiesel: Let me show you dangerous
Kei trucks are dangerous because car companies can't charge 80k for a 30k dollar truck.
@mjtt12 not even they are 3k trucks going for 7 over here lmfaoo
@@Platinum_phoenix 7k if they are 32 years old and beat up. A nice kei truck at or around the 25 year age limit for it to be street legal that's really straight and clean runs 12+
@@josephdover198 yeaa you right I've seen some of the cree cabs with the dump bed go for 15 and 18k
@@mjtt12 Kei trucks are worth about $2K. They have extremely limited use and capability, almost no towing capacity, ridiculously bad handling, and horrible safety ratings. I don't even wanna go into the fact that you don't wanna spend more than an hour in one of these, while with a proper sized pickup truck you can take the whole family on a road trip in comfort. I never understood the fascination with these claustrophobic tiny death traps. Might as well buy a go kart. And I live in the EU btw, for me its proper sized real American trucks all the way.
9:08 "that's all engine" proceeds to take hands off of steering wheel to prove he is not touching the throttle
Plus you can see him shifting lol
@@scottyingham3348do you mean when he was looking at the shifter? he was probably making sure it was in neutral lmao. running this engine and shifting the stock trans would not work. shifting is based on engine rpm not wheel speed.
@@tuningbytokyo I understand how shifting works. On the outside shot you can see the suspension unload/load like he’s grabbing gears, then the inside shot you see his arm move like he’s shifting.
@@scottyingham3348 LOL - tin foil hatter. The engine in these things can barely move them unloaded.
@@ruk2023-- literally watch the scene 😂
I'm blown away by a few things.
1, you actually did it safely
2, the build was clean
3, somehow the paint on the tailgate didn't discolor or peel from the jet!? Crazy.
Nothing about it was safe. using jet engine on road especially with no breaks to handle such speed and weight is opposite of safe. That little truck even unmodified is unsafe on USA/EU roads it's designed for small villages in Japan where nothing bigger can fit on local roads and top speed of 30km/h. There is absolutely zero crash protection in it so if that jets throttle gets stuck everyone inside is dead meat. It may looked safe but it probably was most dangerous thing they did.
8:52
So safe, you can see the fuel dripping out of the back of the truck.
@@wykydytrontell me you know absolutely nothing about kei cars without telling me you don’t even know what a kei car is..
@@bmint yea the kei trucks arent safe even without modification.
look it up , the producers of the kei trucks even admitted they cheated to get trough the safety tests im not sure if there is a law suit right now in japan.
@@wykydytronWaah waah 😭😩😩waaaaaaaaahh
How cool would it be if Cody bought the replica Batmobile aka the tumbler. He’ll never see this comment, but the joy/content it could bring would be priceless.
Me: Wont leave the driveway without a seat belt on.
WD: Jet engine on the back of a tiny truck with no seat belt on.
I'm sure they thought that if they wrecked, a seatbelt wasn't going to save them
Hey, hey, hey at least he's wearing a cool tee shirt. 👍
@@Flashtone08 the only thing necessary in a jet truck is a fireproof suit. But it’s a k truck, so you can’t fit in with helmets and suits. The team probably had to leave that idea. Because who cares. But it would still be nice for them to have a roll cage in that truck, tbh.🤔
A harness, helmet, roll cage and wrap myself in bubble wrap..
what kind of honda is that, it's great
Me in EU: "Sir, you've put an oil catch can on your car, that's an engine modification and you have to pass technical inspection to be able to drive your car on public roads"
WhistlinDiesel in USA: "Jet Engine goes BRRRRRR"
Meanwhile me in another place of EU below you:
"Got no cat and EGR on a Euro 2 car"
"You passed inspection with smog within specs and no warnings."
Come to the Netherlands, our taxes suck but you can do everything to your car. Add a turbo? No problem. Air suspension? Sure. Roll cage? Go ahead. Don't need any paperwork for it. Want to put a different engine in an older car? €50 inspection and it's done.
@@NoctisIgnem taxes are another thing, freedom to do whatever you want to your car is a human necessity. Screw EU countries wIth strict TUV inspections, they don't do anything better than us, i laugh at them. 😂
There are rules and regulations but no one cares.
+15HP you have to go for a inspection.
But who does.
Had a Cinquecento for years. Imported with original motor and turbo back then. They didn't even marked any paper for that.
Upgraded it for a 1.2L with bigger turbo setup back then. Who would know 😅
Have a Own made exhausted on my car now, chipped, open air intake, lowere, bigger wheels and yes a oil catchcan.
(swift sport 2012)
Didn't see any official for that too 😅
Btw
Don't forget that your insurance can have a reason not to pay anything after an accident.
That's the biggest risk.
Even changing some electrical wires or anything on your car.
Soviet era jet turbine, 80s Japanese truck, American owner. Recipe for success.
Reminds me of the "Adobe car" on SNL back in the 80's. Their quote was " German engineering with Mexican know how".
German wheels (BBS)
The problem is the russians built that engine
It still works
"Do know what im gonna do with this water?😮" "im gonna drinke it because im thirsty" 😂😂
hes dumb enough to
11:08 - The best response. "Haha....yeah."
I dont think I have been more excited for a sequel to a YT video.
Fr 🥶
Looks like you don't know how to operate a jet engine, which is why it's smoking and throwing fire, or maybe you know and you were just doing it wrong to make a fun video, idk.
But anyways, here are a few tips to operate a jet engine:
First, the startup procedure: make sure the fuel is off and the throttle is at idle, under no circumstances should you open the throttle when starting the engine, or you'll just create a big flamethrower. Once you're sure everything is set for startup, turn on the igniters, wait around 10 seconds, and then turn on the starter motor. Wait until the engine revs up and stabilizes, typically between 10-20% NG depending on the engine, if you don't know the exact number, waiting longer is always better than waiting less. When it's stable, you can turn on the fuel and watch the ITT (internal turbine temperature), it should not enter the danger zone, the specific limit depends on the engine model. According to your dashboard note at 10:33 , it's 850 for your engine, if it reaches the maximum, you could damage the engine in just a few seconds (you might have already damaged it there), so, monitor the temperature closely, and if it approaches the limit, cut the fuel instantly. This situation is known as a "hot start," which is rare but can happen. Usually, it indicates insufficient airflow into the engine, if that happens, the next startup, leave more time before opening the fuel so the engine revs up more, and it's less time at low NG with the fuel on.
When the NG percentage is over 50%, you can consider the engine on, and you can turn off both the starter and igniters. It should stay around 50-60% NG while idling. Wait about a minute for it to stabilize, after that, you can start playing with the throttle. When moving the throttle, ensure you don't overload the engine by keeping an eye on the NG, it should never exceed 110-115% for most turbines, moving it too quickly can easily overload an ungoverned engine, so be careful with the throttle. Also, monitor the temperature, it should never enter the danger zone (over 900 according to your dashboard note). Since this is a slower setup than the intended use of a turbine, it'll reach the danger zone quickly, so keep an eye on the temperature at all times and be ready to reduce the throttle.
Don't worry too much about torque readings; you can't over-torque the turbine at car speeds. To avoid smoke, don't move the throttle too quickly, always take around 10 seconds to go from idle to max power (max power means around 110% NG, not fully opening the throttle), in an ungoverned turbine, you should never fully open the throttle on the ground if you want to avoid damaging the engine. That's why it was producing so much smoke, you overloaded it, which means the fuel didn't have enough time to burn, resulting in smoke. It's the same as in a diesel engine that's injecting more fuel than it can burn, leading to black smoke in the exhaust, which in a diesel truck can look cool, but in a turbine, you can seriously damage the combustion chambers.
Shutdown procedure: wait around 30 seconds with the engine idling, and after that, simply turn off the fuel, it's as easy as that, there is no secret to shutting down a turbine.
Other tips:
Never turn the igniters on with the engine running, except in heavy rain when it's reducing the ITT too much, there is no reason to turn them on, it won't give you more power.
When you shut it off, let it cool down about 10 minutes before starting it again.
If you had cut the fuel for any reason, never open it again, you have to do all the starting procedure after letting the engine cool down. If you open the fuel again, it won't burn, and if you turn on the igniters with raw fuel in the combustion chamber, the engine can literally explode (it will be a fun way of destroying it, just saying).
During startup, you generate a lot of heat, and if you don't wait for it to cool down for around 10 minutes, you could easily have a hot start.
In this setup, it's complicated, but next time, try to ensure a clean air source for the jet engine intake. Don't place it on the bed of a truck just a few inches from the cab without good airflow, it will overheat more easily. You can add ducts to redirect air into the turbine when going at speed if there's no other place to install the engine. Remember that the more air the engine receives, the more power it will make without overloading.
Also I don't know your engine model, but looks like you are missing the rear nozzle that accelerates the exhaust and it's what really makes the power, try finding one for your engine to have more trust, I'm almost sure it should have one.
Knowing all this, you can have fun while being safe. You won’t smoke other cars, and that engine will last forever.
Cheers from a turbine mechanic. Keep up the good content!
crazy.
its that easy to operate an jet engine.
Ever heard of paragraphs?
o melhor comentário que vi nesse vídeo. Saudações do Brasil, meu amigo
@@JohnGaltI yeah every engine has a like a check list and bulleted list. I doubt it reads like a bible chapter genesis. In the beginning...
bro wrote the whole manual instructions in one big ass comment , respect
Tail Number N5150 - 5150 is a Code that allows for the involuntary, temporary psychiatric detention of individuals who are deemed a danger to themselves, a danger to others, or gravely disabled due to mental health conditions. Commonly referred to as a "5150 hold" - "N" keeping in tradition of FAA tail numbers
good thing he's on the road, not in the air.
N43EX
The code for involuntary hospitalization is different in every state. For instance, in Pennsylvania it's code 302.
Shut up
TAIL NUMBER NEEDS TO BE WD-69
oh yes, i was gonna say the motor companies made a turbine powered car before and it was awesome. then they destroyed it just like the electric car they made years ago. good job WhislinDiesel! you are an innovator!
Built Different 💪
Collab
Do this to a changli
YO ITS MY BOI
@@Survoler8competition..
Who can make the crazy k truck for a k truck Olympics.
Jets got show power and speed.
But 4x4 and big power would have better acceleration.
Firemen are nice guys after all.
“Yes officer it’s stock”
"it came this way from the factory officer"
I saw a semi at a drag car show with a jet engine, it hit over 300mph.
Im just carrying the jet engine for my private"Honda" Jet. 😅 😉
@@UnwantedArguementz Honda actually made a jet.
Best comment
i highly recommend you fit some sort of air scoops that direct air into the engine from around the cabin, it would seriously increase high speed performance and decrease temps.
Through the Rear Window into the Cabin and Roll down the Windows 😂
@@mr.smitty1804yeah a nice little 200mph breeze
What about the flames out the back? Pump that into the cabin too?
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart:
Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen.
I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole.
God Bless Yall!
❤❤
@@USERNAME1-x5uyou don’t run a jet engine inside your commuter car?
10:04 I love how he’s like, it’s so slow without the jet on-when it’s literally adding the weight of like another mini-truck
6:17 the rare occasion where Cody actually looks scared of his decision lol
Exactly 💯
I wonder if this was before or after the merry go round and it flying off into the ground haha
Also becomes British who says kmh
The jet engine got stuck on full throttle in the merry go round video, so I’d be scared too if I was driving in a kei truck with no helmet with it
This is probably before that happen tho
@3dforever. Well….The truck is imported from Japan so the speedometer Cody is staring at when driving is in km/h. The same km/h 99% of the world uses……
11:45 this whole clip is probably the most dangerous thing I’ve seen on TH-cam, but it’s so cool to actually see the inner workings as it heads towards a clean idle.
I dunno, I once seen Donal Drumf talkin and dat's a danger to ower democraysee.
@@MAGAMAN what.....
Fractal wood burning videos exist. Careful to not RIP yourself.
@@MAGAMANBOT detected
@@MAGAMAN bro is not speaking words
When the heat cells are glowing hot crimson red I got chills down my spine. So cool! 11:45 ish
@whistlindiesel 13:24 Install a water injection kit and you can turn up the fuel controller for more power. It'll keep your ITTs down. They had em on old jets
@AndresGarcia-wj3dl same principle as water meth injection for keeping air intake temps down?
Yup same idea
Install the nozzle first :P
Bros casually pushing jet thrust out in public with no consequences
@@Lee-wk3cbhow he is not worried youtube may punish him because he is doing all that in public road like that
@@azixbot as logical as that sounds I don't think youtube knows how to deal with something like this, it gets clicks so it flies. But if you post something 'tin foil hat' worthy then all the sudden they get really butt hurt
So your one of the people that thinks that was real. 😭
it ain't called the land of the free for nothin'
Mashallah WhistlinDiesel
this guy deserves the amount of subs he has , shit like this is unmatched get this dude a tv show.
@@Silas-711 we have a story of Richard Rowlings being spoiled and shown in the wrong light by Discovery production team. He’s not happy about it. And I’ve also been watching the Gas Monkey show on Discovery first, thinking of Richard being a mean dude. Now I’m watching Gas Monkey TH-cam channel, and I have a different opinion. So, if it works on TH-cam, it’s not necessarily gonna work the same way on TV.🤔 We gonna get a different show on TV (not necessarily a better one), if the WD team does this for TV, I think.🙃
would be the end of the fun
Nahhh that would probably kill it/: it has to stay on here tbh
Hardly anyone watches traditional TV anymore. You have way more freedom, make way more money, and get way more viewers on TH-cam.
I personally know someone who put a helicopter jet engine into an old Chevy S10. He was doing 85mph up I35W south of Minneapolis. This was maybe 25-30 years ago or so. Last time I saw him he was putting a huuuuuge jet engine from a Mig into a bread van. I had never seen such a thing of beauty. I wish I had been able to keep in contact to see how that turned out. Without naming names, I'll say he was directly related to a guy who worked with Evel Knievel, as well as worked on the GoFast rocket in 2014. You can't do this type of stuff without connections, money, or both.
7:55 Rare Footage of Cody caring about his employes... 😂😂
Fr
Shh he doesn’t want people to think he really cares about them 😂. But in all honesty despite all the crazy shit they do I think he genuinely does care about all their safety.
@@gunn301 I know that he cares, but in his Videos he doesn't. It is just better Content that way
5:07 was one of the shortest clips but one the most incredible/insane/mind-blowing, it's just so picture perfect and meaningful too the longer you look at it
then this guy at 5:08 orgasming because seeing a lambo out there is probably like finding a damn unicorn 🤣🤣
One day, cars will fly... well, almost...
Someone please escort this wild character straight to Area 51 for a system reboot! They’re due for an alien upgrade at this point
That thing needs brakes and a roll cage.... and maybe some wings
Don't forget shielding just in case the turbine decides to leave it's bearings.
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart:
Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen.
I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole.
God Bless Yall!
❤❤
Or he could at least use the seatbelt that's in there😂
Redbull would give it wings! 😛
@@TheRandompaintI have a honda acty (same truck as in the video, but mine is white and has no jet engine), the seatbelts is for comfort not safety lol no airbags and the crumple zone is your femurs. It's not safe for or meant doe above like 40mph (nvm that I take it to 55 to cruise on dirt roads weekly but that's besides the point 😅)
that shot at 9:28 of two fully grown men in a kei truck with a jet engine in the back cracks me up
absolutely hauling the mail
You are singlehandedly keeping the fire department employed
You mean deployed?
Jet engines are so freaking cool.
paint on that tailgate is fucking impressive
I can't believe it survived the fake flames. The Ferrari that Burned to the ground in the background looks like the fake flames didn't hurt it either.
Its a HONDA!!
@@steveletson6616 someone's angy they don't have a Kei truck with a jet engine on it
@@steveletson6616 you are the worst breed of human being
Lol it looks so fast, until you pull away and see the full size van doing 60 next to it 😆
1:26 to be fair Mr. Beast is also evil.
No tf he’s not, everyone lies to get ahead.
You don’t know what evil is if you think a TH-camr being a little dishonest is “evil”
@@AutoSearPin actively keeping a pedophile in their content is pretty evil highkey
@@AutoSearPinhe is evil. A true greedy scumbag.
Why are you surprised. His name is Mr Beast. As in the Beast. Not the best. The Beast....
Lol @ someone rushing in to defend him
This guy loves jet engines
3:40 You missed the opportunity to have a ramp agent guiding your test flight.😢 The dude in orange jacket with orange sticks is something that this test run is definitely missing.🤔
9:50 when your buddy gets his first 2 stroke 🤣
Facts
Ok, this little kei truck has to be one of the most awesome projects ever made on this channel! So much fun, man!
As a aircraft mechanic i love everything that's going on here and I will donate my services if at any point you end up in South Florida.
Also just an FYI most of the white smoke is under burnt fuel. In your configuration what might look sweet is a wet motor while driving. SPARK OFF. Sends a 30 ft fog out the back depending on jet engine size.
What you need is an exhaust shroud. Preferably open that opens and closes using fuel like the fighters of today.
Damn you did it again, always a good day when whistlindiesel posts
Cool I guess
Ou wi
That’s crazy bro. I just craped my pants
@@BenjaminKerr-yj4gs ikr he does some crazy shit
i would not have been surprised if cody slapped some wings on it and made it a actual jet💀
4:23 you guys are starving that motor of oxygen. Make a cowl for it! Get that airflow directed better!
Respect to Host and Crew
11:00 Firemen are on a different level than cops.
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart:
Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen.
I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole.
God Bless Yall!
❤❤
Firemen are employed for their Bravery and Intelligence, Police are employed for their Puppy Dog Obedience...
The difference between saving lives and ruining them.
Yeah fire department doesn't care unless it's a fire marshell and you're committing insurance fraud. They're just there to put out fires and save lives
His initial reaction was , shit can i Ride. I felt that
13:29 "Fire up the hayabusa
Initiate the Viper eleven" XD
That beginning cinematic on the sand.. okay you haven't forgotten your ways. Well done.
Not the biggest fan of all these jump cuts but I know it brings in more tiktok brains. Beautiful cinematics though. 👌🏻
idk who the editor is but they did an amazing job. Love the sound and the videography of some clips. (edit) 2:20
Okay with all the crazy things that y’all do on this channel, y’all should make a movie with all the skills and craziness attached 😂
But that’s just a theory, a duck theory
@@joshmanis9860damn right
2:15
It worked for jackass. It would be hell getting insurance though
There's no way there won't be some sort of documentary about him if he keeps up which he hasn't let us down for years now.
12:00 Guys, when you see sparks flying out the back of a jet engine, SHUT IT DOWN. those are metal chunks coming from somewhere. Compressing fuel and air won't create sparks.
The reason flames shooting out the back, is he doesn't know how to start that jet engine correctly.
You suppose to turn off fuel, make sure throttle at idle, turn on igniters for a few seconds to warm up and give better chance of starting, then turn on starter let it spool up to RPM and then turn on fuel and starter will disengage and engine will run off fuel.
Never turn up throttle when engine is spooling up. You effectively make a flame thrower that way and risk it actually exploding as well.
Youre expecting whistlin diesel to have bought a mint condition jet engine and take care of it properly? Are you new here?
@hooniganruiz5613 No as watch his videos for many years and definitely fully aware of the destruction. The problem is jet engines is not something you F around with, especially being no protection as literally out in the open on a mini truck. The merry go around was insane he messing around with not being around much longer. It way different and way more dangerous then the videos he done in the past. It may seem cool, but it won't be when one literally goes unbalanced on him when he near it. It literally worst then Fing around and waving carelessly with a loaded firearm
Bring an A&P and engineer I seen the damage caused when one becomes unbalanced and explodes. Being the way he has it mounted out in the open, a very real chance if the turbine comes apart, it literally can seriously injure or do worse to someone that around it. At least his monster trucks they are mounted below, and he high up, and he drives it on his private land. This is way more dangerous as it mounted directly behind him on a thin mini truck out in the open on the back of the bed, nothing sheilding it, that likely won't protect him if that engine comes apart. Plus, he was driving it on a public road, which is an absolute huge NO as he risks someone that behind, or on the side of him.
I don't think he fully knows the risk involved with messing around with those jet engines like he is. He likely assume it be no worse than the trucks and cars he regularly destroys, thinking he can walk away from it and be ok. Those jet engines are a whole other league of it own and just take one mistake and not even a mistake could be a crack you did see and you or someone around it not going to be able to walk from it. Don't mess around with something that beyond dangerous you don't fully understand and essentially bring out to a public road. That very careless & reckless at that point. Not to mention you can end up in prison if something goes very wrong as well if he survived it.
@@thetechgenie7374this was one of the only videos of his that made me feel like if things go wrong, they will go really wrong. Too many things to list but out in the public roads was the most “this is over the line”. All the people behind him got hit with a cloud of smoke possibly causing a wreck behind him.
I generally don’t care at all when he is blowing up his land, it’s too far when you endanger others.
@4huggies Yep feel the same way as love his other videos, as it material stuff, but this one is taking it too far. I'm glad he didn't attach the jet nozzle tube. Otherwise, it have way more thrust. I hope he doesn't try to push that truck any faster as it won't have enough down force to keep front from lifting which would be him crashing at well over 150 mph and over, he be unrecognizable stopping unexpectedly instantly at those high speed, there no walking away from that in that lightweight mini truck. Let alone other ways to crash would be tires would likely pop due to heat generate going that fast or brakes would fail. That trucks not design for that period. It was different with his monster trucks as was built and modified, and someone thought it out well enough. That mini truck is not even close and he end up hurting, or worst to someone, or himself.
1:21 actual Mr. BEAST
Cody breaking character out of pure joy for the jet engine
13:44 Days since last incident: 1 🤣🤣
This guy is the definition of innovation and creativity
I am proud to see kei trucks go this fast.
Never in my life, when I saw these things all the time as a child (and now) would I have thought that those rinky dinky light trucks could go so fast.
Only people who were here 1 hour ago can comment
I've been to Japan and seen a kei truck multiple times and once in America they are very interesting but reliable no wonder it's the number one farm truck for japan
❤Jesus Christ is the only way to be fulfilled. I'm writing this as I just had an encounter with Jesus the Almighty God. I was being tempted by demonic forces. I fell into temptation, and I ran away from the Lord. This hasn't been the first time. I have been on a on and off cycle which seemed to be an endless. But today, I feel called to share this testimony. I watched a video which really opened my eyes while I was still "hiding" from God. It touched my soul to the point that I fell on my knees right away, and begged for forgiveness and guidance. This was beyond anyother feeling I've felt while repenting. This one felt true. I had been like mad at God for being dumped by my this girl I was talking to. So this was a way to be tempted by evil demonic forces. I would get intrusive thoughts, and I kept trying to solve this feeling of being dumped on worldly things. And let me tell you, it only makes it worse. If you're someone who is not sure if you're saved, or if you are saved, but have been going through these on and off cycles such as porn, or secular music(which are other cycles I've been having a difficult time with) I want you to call upon the name of the Lord Jesus Christ. He is the way, the truth, and the life. If you don't know what to do, I want you to get on your knees, and pray this prayer with your heart:
Jesus, I believe you died on the cross for my sins, and was ressurected on the third day. I believe you came to the Earth, to pay for our sins. Thank you for dieing on the cross for my sins, in Your Name, I pray, amen.
I don't know who is reading this, but if you ever fill an empty whole, which cannot be fulfilled, the only way to fulfill is by Jesus. When you turn your back on Jesus, you seek everything other then him. All worldly things, will never fill that hole.
God Bless Yall!
❤❤
Aghhhhhhhhhhhhhhhhhhhhhh right
Fighter jet nose art like a shark face would look sick on it.
😂😂😂😂
12:21 that was for thumbnails 😂
12:50 I will not be imagining that
I did
Pussy
Didn’t have to imagine it
So, about the legality of driving a jet-powered truck on the highway... Anybody got any answers? 🤔 Asking for a friend who wants to install a jet engine in his MINI Cooper! 🚀😂
Pretty sure most countries have laws against launching your car into orbit on public roads!
By the way, that's a good idea - flames shooting out the back is a great way to make sure tailgaters keep their distance! 🚗🍖
@@microcyberbro boutta flambé the Toyota Camry 30ft behind him
There were turbine powered cars in the 50s. Assuming you weren't smoking everyone out like a redneck homo in a brodozer, they wouldn't have a reason to mess with you...
i have a mini jet thruster on my bike..... never had any issues with the law. only police reports made against me
Bro the way you said "you're slow as f*ck" got me rolling
Could you imagine just drinking a beer with the ole dog just sitting on the porch after a day of work and you see this just fly by 😂
Where was that footage taken at 2:30? Was it a salt flat? If the answer is yes are we gonna witness the top speed of this bad boy in the next episode?
11:28 is it not normal for there to be smoke everywhere?
Someone get this man his A&P certificate
I love Cody's videos 😀😀
12:08 New era of the ol Fake “Wood Fire” 🔥 crackling in the background on the ol Tv 📺 !!
1:58 bro just had to do CBoystv dirty like that
Yeah I'm not for it. Cbpys did it better
this might be my favorite youtube video of all time
Real talk, the amount of engineering that went into making this happen is nothing short of incredible. Well done guys!
Not really. The classic non FADEC controlled jet engines you just spin really fast and pump fuel in to them. That is why they are so reliable, much less parts for control.
@@rkan2I meant the engineering of putting this into a mini truck. He joked about giving them one hour start to finish, but I know how much work went into making this happen in reality.
@@spamcans05 It is like on the stand they are shipped with a throttle cable and ignitor s going to the box :D
1:41 average construction work experience
1:11 nice mtb
Lmao I Had no idea wtf you were talking about and was looking hard as hell till I had to Google wtf MTB meant and then i saw the bike back there lmao shit made me feel stupid but I've never seen nobody say "MTB" but i guess i learned something new and useless today I guess right on LMAO
I had to rewind to see what you were talking about lol
Evil of some sorts for sure can't miss that linkage!
@@arobbins317ilmao i use MTB all the time
Evil wreckoning?
Jet engine is literally the best purchase on channel !
Tail number: P3N15
or from the beastie boys album, Licensed to Ill - 3MTA3
@JoelFazio Came to the comments section to say the same. Glad I'm not the only autist here.
P3N15 is the next Tesla model. It looks like a compact but it's cold outside
Gay asf
800B1E5
Tail number (N)RMT-234 13:54
It has to start with N
Cody did such a good job editing this video!
I agree, that man is so talented. I'm surprised he doesn't hire an editor by now, although if he did, the videos would never be this good.
mans should work for hollywood
Glazing
He has a team that edits his videos. You're obviously new to the channel.
@@COMP-UShe's had an editor for well over a year.
1:55 lol shout out cbuusteebus
Lol
You did not just diss the c boys like that, take it back Cody @whistlindiesel
Whistling diesel goes on the road all departments are like he's on the move go that way😂
1:25 no, the opposite of Mr Beast would be Mr Good
At 6:22 he actually looked scared, first time in all videos. NIce!
wow, im surprised that the jet engine didn’t disconnect from the bed and smash the cab with whistlin in it
You were first
You were indeed first
Never underestimate a KEI Truck... 🤣
Ya, atleast put a metal plate in between 😮
The paint on the tailgate is impressive
No one asked him to do this yet he does it. Seems like a unnecessarily fun time
What you think he can't come up with his own ideas for content and fun?
He loves what he does best
1:55 cboystv diss 😂
On Cboys Video drop night too LOL
I saw that smoke like damn
@@nash5718 I know hahahaha I seen the notification and I honestly thought this was a C boys video until I clicked on it 😂😂
i find it awesome. cboys really went to crap
@@lHlEIDLEBAUGHhow so ?
this cideo shows the true power of an "average"... AAAMMMURRRCCCEN man😊
cboys dig was unneeded
I’m sure there’s a reason for it.
c boys are simps
Holy shit the fuel leaking out at 8:52 is craazyy
🚨🚦KEI WOW that thing is fast …just the kind of batshit insane janky engineering ℹ subscribe for 😂😂😂😂😂
Hell yeah brother 💪🏻
Dammit I love a whyte trashy idiot who destroys everything he touches I’m still steaming over that Ferrari and that anylevel pickup 🛻
The Fire Dept are full of heroes.
6:46
“That’s the thing about jet engines, they’re so reliable”
-WhistlinDeisel
Until you destroy them by dumping fuel into them at startup😅
Then its got the reliability of campaign promises
Goes hard
yo love your vids man
No complains on my behalf.
Pretty well suited for a little day drinking while jetting down the highway amirite?
Now do a twin jet engine
Great idea 👍
Single high bypass ratio turbo fan engine is better.
prolly handles so well bc all the hp is goin straight into acceleration and wont (really) have to worry about traction issues bc the cars in neutral, sick af
Im digging the lawn mower wheels you put on the truck 😆😆
he obviouly needs to put reaper wheels on it, and then take it to antarctica and drive it on ice at 300 mph with the jet engine
actually, a jet engine would work really well on ice, just put skis on a vehicle
would need a special system to stop tho
0:11 love that ferrari ❤🔥❤🔥❤🔥