These look great. I have made a few sets. You might want to put a layer of a solid colour on the back as when your playing your opponent will see through and know your pieces 😉 x
@@PouringYourHeartOut dont look that way at all. Played with the set my brother made identical to these.... you can see right through. You have to cover the back with paint or opaque resin.
Those turned out really pretty Julie! For the dots i suggest a needle tip glue bottle (from amazon). It’s sooooo much easier. I add acrylic paint in it and thin it down with some floetrol and water (I actually use my Dutch pour white paint) and it works like a charm. I can dot all my dominoes in less than 10 min with that tool. I have a video of it on my Instagram page if you’re curious to see how I did it. 😊
Put a piece of gold leaf sheet on the back of the domino to avoid the transparency so they are playable. One ones she made are more of a collectors item/show piece set of dominoes.
I wonder if you did the dots in gold, if it would blend together enough that you won’t see clearly the dots from the back, so you can keep the clear aesthetic while getting to still play (with minimal cheating from seeing the dots, lol)
Nice job! can I give a bit of advice, I made 15 sets of these for christmas, I got this mold and it drove me nuts, Igot a better one which was much easier to use (bear mountain designs LLC) has lots of molds and good solid ones for domino`s.. If you fill a good spray bottle with 90% alcohol, and spray your molds just before you pour your epoxy in, then doom your mold at the back so you don`t get that rigid ridge, then spray again with the alcohol (more than once if you have to, to remove more bubbles), it will take out most of your bubbles, no need to torch or use heat, if I do have to use heat, I use a blow dryer, those flimsy molds don`t take much to burn and then stick and get ruined, lol ask me how i know haha.. and I use mica colorants with glitter to make sure you can`t see through the backs..I also made very very bright glow in the dark ones also...
Then I make dominos the rules are they have to be opaque.. I will sometimes do two layers one translucent one opaque.. and they all have to look the same on the back.. so any marbling has to be on the face of them... that’s so that when ppl buy them they can actually play dominos without cheating
I tried using inks first but you can see straight through that too. Instead I used mica to colour the dominoes & you couldn't see through them. I then finished them by doming the back with glitter to give them a little sparkle. Maybe opaque inks would work too.
I have ASD & will never understand why some people think an objective question is rude, but you’re right, someone might. They will have to work out their own feelings, I guess. I still want to know, though.
If you use rubbing alcohol in a little spritzer bottle it will get rid of the bubbles without using the torch. I've ruined many molds with my torch before I discovers this little helpful bit of info! :).
Take a tip from dicemakers - use regular acrylic paint and a paintbrush for the lines/dots, slosh it on and then gently wipe the excess off the surface with tissue or a babywipe while it's still wet, leaving paint in the recesses.
@@cynthiawilson8294 their not covered by the gold leaf, when she turned the 2 and blank over you could see the 2 on the other side lol.. Would have been better to put a thin layer of resin and gold mica on the back side of the domino
@@mrobson59 Maybe because it was her first domino experiment & she did say she would prep the gold leaf differently next time. Perhaps a quick spray of gold paint will solve the immediate issue.
I made some with real dried flowers, in clear. Once dry, I covered the backs using a drop of white acrylic paint in the resin so you cannot see the dots when playing. I have little craft syringes that I used to fill the lines. I used paint with a hint of Floetrol. I used the dotting tool to fill the dots with just paint. If the lines over filled, I simply used my finger and wiped it off. I thought of making them dome, but thought they would not sit right.
I completely ruined my first mold. I put too much acrylic paint in my resin, it never set. Was extremely sticky. So sticky that I could not remove the dominoes. Mold also ripped. I’ve since gotten better molds.
I’m sure you found it by now but but your missed another pip got 2 3/4 the bottom should be a 3/5. Also the extra room at the top of the box with the 4 domino would be good to put a score pad and a pen in
I bought the Lets Resin mold, can highly recommend the quality if you can get hold of it. I painted the dots and lines before I poured the resin in, I used the gold leaf pen and just painted directly onto the mold, think its a lot easier that way.
@@chrisnwendyduncan Has done 3 times I've used the domino mold, I've also done Christmas ornaments this way, painted the intricate bits directly onto the mold, not had any problems doing it that way at all.
I love watching your video I like the way you laugh at yourself, I have the let resin dominoes mold try using alcohol instead of torches your mold ,llove your dominoes set
Omg...i felt like a kid watching Dora yelling at nearly midnight with a sleeping child next to me "wait...you got two 1, 2's!! Its right there!!! ITS RIGHT THERE!!! Cant you see it?! UUGH! IM TRYING TO SHOW YOU!!" & when you found it i celebrated 🤦♀️😂😂😂😂😂😂
what i have done and so have other people say u were using white get white acrylic paint and rub it over the top so it goes in the groves then get a bit of paper towel and wipe the rest of.it stays in the holes ect
You're right they are so much fun to make, I've made a couple of sets & I love them. I bought the Lets Resin moulds from Amazon & so far haven't had a problem with them burning. The line is thicker on it too. I found that using mica for the main colour prevented you being able to see through them but just to make them more fun I domed the back using lots of glitter. I used regular acrylic paint for the dots & a smallish brush then just wiped the top with a baby wipe & all the excess came off. I love the box, it's such a great size for them & would finish them off well if you were giving them as a gift.
Ummm you cant use alchole on finish resin pieces!!! Lol I think you are confused with soap sweetie. Lol never spray alchole on resin. Lol alchole is used to clean off resin spills. Lol
@@marikiemarie7622 She probably was talking about spraying the wet resin with alcohol spritz to get rid of the bubbles. Why would she spray dry resin? Lol.
@Ambie Nu um yea..she was talking about spray wet resin with alcohol. Which you can't do. Ever! That is the quickest way to ruin expensive resin. Lol she has seen that with soap.. not resin. Lol you have to blast heat or pop with toothpick. Alcoholic breaks down resin . You arent even supposed to clean finish pieces with alcohol. Remember, youtube is full if amatures using professional supplies. They don't always know what not to do.
@@marikiemarie7622 Well good thing we are all not like Robots and do everything the exact same way. My pieces come out just fine spraying alcohol on wet resin. Pretty crystal clear.
I have seen other artist use these bottles when doing dominoes Saw them on Amazon 5 Packs 30CC Art Bottle, 30ML Needle Tip Glue Bottle, Squeeze Plastic Bottle Dispensing Needle Sealing Cap, Needle Tip Bottles Liquid Flux Dispenser Applicator (30cc Needle Tip Glue)
the nail stylist tools work great for dots and the line, I just used acrylic paint and wipe off excess of with a soft wet cloth (baby wipes leave lint I found).. I also finished off the tops of my domino`s with Tri Art liquid glass to seal on the acrylic paint, so kids don`t rub them off easily.. just trying to give you some tips to make it easier for you... wink wink
I love your projects and explanation. I have this problem with the molds, they stick to my resin, what can I do and if I leave it 72 hours to unmold it is almost impossible. Which type is better to unmold? ...... 24, 48 or up to 72 hours as the product says here is USA. Very frustrating just starting this hobby Please help me 🙏
After you sand, does it take the shine off? I imagine it would if it were color. What would you suggest covering the sanded places with to bring the shine back? I use a dotting tool for the dots and acrylic paint. Then maybe a drop of varnish to seal the acrylic. I wonder if varnish lightly brushed would cover the dull spot caused by the sanding? These are beautiful!! Thanks!
Hi, what resin fo you recommend for dominoes? I have a few bubbles in my dominoes after it cured. I used a heat gun and sprayed alcohol snd the resin I stir very slowly so I didn’t see any bubbles, yet my finished product has some bubbles. Ugh.
You also had a duplicate of 1/2 laid out on your table when you were looking for the missing domino. I'm sure you've found it by now. But you painted a duplicate domino that's why you couldn't find the other one
we can't play it because the opponent will see our game because of the transparency of the dominos. I created turquoise dominos and painted the back and edges gold.
Julie if you play Domino’s you can’t see the numbers on the backside the other players and your numbers have to be a solid color on the back of your dominoes I love it I did the same thing . I did the same until a person who plays told me they can see the other person’s numbers . But I love them and I had to buy me a better moded.
They are gorgeous and would make great gifts for anyone who'd love to have a set. My only concern is that because they're see-through, they can be identified when flipped upside down. Someone who knows how to spot minute details can learn which domino has specific dots and take an unfair advantage during an actual game. Yes, the dots are covered by the gold leaf, but the patterns of the gold leaf are not identical. It's a shame because they're so freaking gorgeous!
Do you not wear a mask when you are working with your resin? I’m asking cuz I’m starting to use resin and everything says it can be really dangerous to inhale.
dont use your torch yous alcohol spray!! amazon molds are much better and last a long time if you dont use heat! i find 250 max for my mold and i dust with talc 1st also if you want to play them remember they are no good if you can see through them lol i use rind stones in my dots with uv resin
You can fix that domino where the doubt is missing from the four by just using a one and and three and just don’t color and the two dots on the outside just color the dock that’s right in the middle of the three and then that would make you a one and four. I love this video
I’m new to resin and just in the learning phase. I absolutely LOVE your videos and have just been binge watching your channel. Lol. I can’t wait to make my own creations. ❤️
To paint the dots I dip my fingers in paint and drag across the domino and then wipe the domino on a paper towel so much fast and easier for me. Beautiful
I haven't finished watching your video yet but you said something that just warmed my heart.... trying to see which cavities need more resin, you said "2nd from the right" - that reminded me of one of my favorite lines from one of the Star Trek movies "2nd star to the right & straight on till morning"
Hi Julie! Two things I’ve learned working with dominos...dust your mold with baby powder before you pour and secondly, Amazon sells a bag of tiny plastic bottles with a metal needle nose. I fill with acrylic paint and it works great for the dots and lines.
Even with the few issues you had, it is a beautiful set! Absolutely beautiful. Next time you make a mold, pop a dot of silicone in that one that's missing a nib, to fix it, maybe. If you're going to use the mold again, so it's not a complete waste. I was wondering, could you use a piping bag and a bit of thin resin to fill the dots and lines, or is that line too thin for even that? Love the suggestion someone made of using the fine tip bottles. That will work wonderfully, I think. I love the boxes you found for them too. Thanks so much for sharing. I'm just a sucker for a good set of dominoes, I guess.. hehe
There is a dominoes mold that is heat resistant that I purchased on Amazon if you have to use your blow torch. But you should spritz them with alcohol to get rid of the bubbles
I love your videos 😍 Big Fan! But even though there are some cheap-o molds out there, it’s kinda not fair to blame a mold for sticking when you are using a torch. Most mold makers say DON’T use a torch. Others comment on using alcohol spritz, or use a lighter. Long neck lighters are great for this. Please don’t be upset with me for saying this, I REALLY LOVE YOUR WORK!!!
These look great. I have made a few sets. You might want to put a layer of a solid colour on the back as when your playing your opponent will see through and know your pieces 😉 x
They are very well disguised
@@PouringYourHeartOut they don’t look it
@@PouringYourHeartOut dont look that way at all. Played with the set my brother made identical to these.... you can see right through. You have to cover the back with paint or opaque resin.
Those turned out really pretty Julie! For the dots i suggest a needle tip glue bottle (from amazon). It’s sooooo much easier. I add acrylic paint in it and thin it down with some floetrol and water (I actually use my Dutch pour white paint) and it works like a charm. I can dot all my dominoes in less than 10 min with that tool.
I have a video of it on my Instagram page if you’re curious to see how I did it.
😊
Thats a great idea. I was thinking a little pipette but a needle bottle would be easier :)
Pouring Your Heart Out much easier. You’d be done in no time 😊
Great idea! I made my first two sets and the lines took forever!
It is very pretty, but can the opponent see what you have because you can see through areas of the dominoes?
Really enjoyed it! Was crazy looking for that piece you couldn't find😂 cool video 👍🏼👍🏼
What fun!
To bad you don’t have a stick blender to get the gold flake broken up better.
Why don't you turn them on the back side so we can see how they look
These are beautiful however, you won’t be able to play with them because everyone will see what pieces you have because you can see right through them
I really like how they look, but can you see the dots through the actual domino?
Put a piece of gold leaf sheet on the back of the domino to avoid the transparency so they are playable. One ones she made are more of a collectors item/show piece set of dominoes.
I wonder if you did the dots in gold, if it would blend together enough that you won’t see clearly the dots from the back, so you can keep the clear aesthetic while getting to still play (with minimal cheating from seeing the dots, lol)
Nice job! can I give a bit of advice, I made 15 sets of these for christmas, I got this mold and it drove me nuts, Igot a better one which was much easier to use (bear mountain designs LLC) has lots of molds and good solid ones for domino`s.. If you fill a good spray bottle with 90% alcohol, and spray your molds just before you pour your epoxy in, then doom your mold at the back so you don`t get that rigid ridge, then spray again with the alcohol (more than once if you have to, to remove more bubbles), it will take out most of your bubbles, no need to torch or use heat, if I do have to use heat, I use a blow dryer, those flimsy molds don`t take much to burn and then stick and get ruined, lol ask me how i know haha.. and I use mica colorants with glitter to make sure you can`t see through the backs..I also made very very bright glow in the dark ones also...
See through domino's isn't really good for the game.
I was thinking the same
Oh dang. It's been so long since I played. It's her first time so maybe she will try again
I love ya dear but ppl who make clear dominos confuse me. They’re useless 😞
Then I make dominos the rules are they have to be opaque.. I will sometimes do two layers one translucent one opaque.. and they all have to look the same on the back.. so any marbling has to be on the face of them... that’s so that when ppl buy them they can actually play dominos without cheating
And I also dome the backs after I demold so they’re not having that ridge .. makes a big difference
How can you play when the dots show from the back?
I want to ask that every time I see someone do a clear set. Lol
I didn’t want anybody to think I was being rude.
I tried using inks first but you can see straight through that too.
Instead I used mica to colour the dominoes & you couldn't see through them. I then finished them by doming the back with glitter to give them a little sparkle.
Maybe opaque inks would work too.
I have ASD & will never understand why some people think an objective question is rude, but you’re right, someone might. They will have to work out their own feelings, I guess. I still want to know, though.
I don’t even know how to play. Lol 😂 I just keep staring at them like 🤷♀️🤔
They are well disguise by all the gold
If you use rubbing alcohol in a little spritzer bottle it will get rid of the bubbles without using the torch. I've ruined many molds with my torch before I discovers this little helpful bit of info! :).
Take a tip from dicemakers - use regular acrylic paint and a paintbrush for the lines/dots, slosh it on and then gently wipe the excess off the surface with tissue or a babywipe while it's still wet, leaving paint in the recesses.
How can you use them to play when you turn them over to select your Domino's you'll see what the numbers are through the domino
I asked that above, & she said the gold flake blocks them. Cool, right?
@@cynthiawilson8294 their not covered by the gold leaf, when she turned the 2 and blank over you could see the 2 on the other side lol..
Would have been better to put a thin layer of resin and gold mica on the back side of the domino
@@mrobson59 Maybe because it was her first domino experiment & she did say she would prep the gold leaf differently next time. Perhaps a quick spray of gold paint will solve the immediate issue.
OMG you MUST be careful with resin dust its incredibly toxic! I'm not just saying that either I'm being serious!
I’m much more careful about the dust than the fumes tbh!
Hello 👋
I made some with real dried flowers, in clear. Once dry, I covered the backs using a drop of white acrylic paint in the resin so you cannot see the dots when playing. I have little craft syringes that I used to fill the lines. I used paint with a hint of Floetrol. I used the dotting tool to fill the dots with just paint.
If the lines over filled, I simply used my finger and wiped it off.
I thought of making them dome, but thought they would not sit right.
I completely ruined my first mold. I put too much acrylic paint in my resin, it never set. Was extremely sticky. So sticky that I could not remove the dominoes. Mold also ripped. I’ve since gotten better molds.
This sounds beautiful with the flowers.
You shouldn’t be able to see through the domino. And the torch you shouldn’t use. You melt your mold. 91% and over alcohol will work great!
while you made them look good, I would be requesting my money back, that mould isnt fit for purpose.
I’m sure you found it by now but but your missed another pip got 2 3/4 the bottom should be a 3/5. Also the extra room at the top of the box with the 4 domino would be good to put a score pad and a pen in
You did what I did on my first set. Dominos need a dark backing. Should not be able to see through.
I think you could take the dremmel and just hit it lightly to make the hole for the 4th dot.
These are very classy. Too bad the mold sucked! Arghhh Hope you do more with your mold.
You don’t want your Dominos to be transparent because then your opponent can see what you have.
I bought the Lets Resin mold, can highly recommend the quality if you can get hold of it. I painted the dots and lines before I poured the resin in, I used the gold leaf pen and just painted directly onto the mold, think its a lot easier that way.
So when you do it that way, paint them before adding the resin, they stay marked when you remove them from the molds?
@@chrisnwendyduncan Has done 3 times I've used the domino mold, I've also done Christmas ornaments this way, painted the intricate bits directly onto the mold, not had any problems doing it that way at all.
Can these be used for play since you can see the dots through them?
I love watching your video I like the way you laugh at yourself, I have the let resin dominoes mold try using alcohol instead of torches your mold ,llove your dominoes set
Omg...i felt like a kid watching Dora yelling at nearly midnight with a sleeping child next to me "wait...you got two 1, 2's!! Its right there!!! ITS RIGHT THERE!!! Cant you see it?! UUGH! IM TRYING TO SHOW YOU!!" & when you found it i celebrated 🤦♀️😂😂😂😂😂😂
what i have done and so have other people say u were using white get white acrylic paint and rub it over the top so it goes in the groves then get a bit of paper towel and wipe the rest of.it stays in the holes ect
I have the same mold. I purchased it on Amazon from Let’s Resin. I finally ordered a different mold
You're right they are so much fun to make, I've made a couple of sets & I love them.
I bought the Lets Resin moulds from Amazon & so far haven't had a problem with them burning. The line is thicker on it too.
I found that using mica for the main colour prevented you being able to see through them but just to make them more fun I domed the back using lots of glitter.
I used regular acrylic paint for the dots & a smallish brush then just wiped the top with a baby wipe & all the excess came off.
I love the box, it's such a great size for them & would finish them off well if you were giving them as a gift.
Try using 90 or above alcohol instead of torching to remove air bubbles. Really cute though. 😊
I use 99% alcohol, put it in a spritzer bottle (very fine mist) and spritz your molds instead to get rid of the bubbles
Love how they came out 😍 Why don't you use alcohol to spritz the bubbles? Than you won't burn your mold 💡
Ummm you cant use alchole on finish resin pieces!!! Lol I think you are confused with soap sweetie. Lol never spray alchole on resin. Lol alchole is used to clean off resin spills. Lol
@@marikiemarie7622 She probably was talking about spraying the wet resin with alcohol spritz to get rid of the bubbles. Why would she spray dry resin? Lol.
@Ambie Nu um yea..she was talking about spray wet resin with alcohol. Which you can't do. Ever! That is the quickest way to ruin expensive resin. Lol she has seen that with soap.. not resin. Lol you have to blast heat or pop with toothpick. Alcoholic breaks down resin . You arent even supposed to clean finish pieces with alcohol. Remember, youtube is full if amatures using professional supplies. They don't always know what not to do.
@@marikiemarie7622 Well good thing we are all not like Robots and do everything the exact same way. My pieces come out just fine spraying alcohol on wet resin. Pretty crystal clear.
@@NailsbyAmbie omg.
I have seen other artist use these bottles when doing dominoes
Saw them on Amazon
5 Packs 30CC Art Bottle, 30ML Needle Tip Glue Bottle, Squeeze Plastic Bottle Dispensing Needle Sealing Cap, Needle Tip Bottles Liquid Flux Dispenser Applicator (30cc Needle Tip Glue)
thank you for the video , what is the gold stuff called
Gold leaf flakes can be found at Michael’s
the nail stylist tools work great for dots and the line, I just used acrylic paint and wipe off excess of with a soft wet cloth (baby wipes leave lint I found).. I also finished off the tops of my domino`s with Tri Art liquid glass to seal on the acrylic paint, so kids don`t rub them off easily.. just trying to give you some tips to make it easier for you... wink wink
I love your projects and explanation. I have this problem with the molds, they stick to my resin, what can I do and if I leave it 72 hours to unmold it is almost impossible.
Which type is better to unmold? ...... 24, 48 or up to 72 hours as the product says here is USA.
Very frustrating just starting this hobby
Please help me 🙏
Julie, try a thin eyeliner brush for your line. I think it would be small enough. I do love the set.
After you sand, does it take the shine off? I imagine it would if it were color. What would you suggest covering the sanded places with to bring the shine back? I use a dotting tool for the dots and acrylic paint. Then maybe a drop of varnish to seal the acrylic. I wonder if varnish lightly brushed would cover the dull spot caused by the sanding? These are beautiful!!
Thanks!
Beautiful!!!❤❤❤❤❤❤❤❤
I had to TH-cam this shit ain’t no way I’m counting that bad, plus they’ll stump you everytime you need that 15 /20 play
Hi, what resin fo you recommend for dominoes? I have a few bubbles in my dominoes after it cured. I used a heat gun and sprayed alcohol snd the resin I stir very slowly so I didn’t see any bubbles, yet my finished product has some bubbles. Ugh.
You also had a duplicate of 1/2 laid out on your table when you were looking for the missing domino. I'm sure you've found it by now. But you painted a duplicate domino that's why you couldn't find the other one
we can't play it because the opponent will see our game because of the transparency of the dominos. I created turquoise dominos and painted the back and edges gold.
Julie if you play Domino’s you can’t see the numbers on the backside the other players and your numbers have to be a solid color on the back of your dominoes I love it I did the same thing . I did the same until a person who plays told me they can see the other person’s numbers . But I love them and I had to buy me a better moded.
WOW! Beautiful...Thanks for sharing, Thumbs up! 👍👍👍
Not sure if you found it or not but you have 2 3/4 dominoes (should be a 3/5) just a oversight but don’t want you to sell and have errors.
They are gorgeous and would make great gifts for anyone who'd love to have a set. My only concern is that because they're see-through, they can be identified when flipped upside down. Someone who knows how to spot minute details can learn which domino has specific dots and take an unfair advantage during an actual game. Yes, the dots are covered by the gold leaf, but the patterns of the gold leaf are not identical. It's a shame because they're so freaking gorgeous!
love your videos but please stop using the torch. Alcohol works so much better and no melting molds
don't torch molds ... spritz with alcohol to remove bubbles ... very pretty
Do you not wear a mask when you are working with your resin? I’m asking cuz I’m starting to use resin and everything says it can be really dangerous to inhale.
These are pretty but dominoes are a serious game and there's no way I could competitively play a game when the competition knows what pieces I have
Pretty but when turned over to play, you can see the dots. I did the same thing- I'll be putting a solid second layer on mine- no see-thru
dont use your torch yous alcohol spray!! amazon molds are much better and last a long time if you dont use heat! i find 250 max for my mold and i dust with talc 1st also if you want to play them remember they are no good if you can see through them lol i use rind stones in my dots with uv resin
You can fix that domino where the doubt is missing from the four by just using a one and and three and just don’t color and the two dots on the outside just color the dock that’s right in the middle of the three and then that would make you a one and four. I love this video
Julie, next time paint the dots and lines in the mould before you pour the resin, works really well 😀 x
I do the same, it comes out really well, I used the gold leaf pen
I agree, maybe using like the gold pen she used in one of her other molds, putting the gold on the dots then the resin and some flakes :D
🎃🥉🎰
Gorgeous! Try using a regular long neck lighter to zap bubbles. Doesn’t get near as hot & works perfectly 😊
Hello I love watching you. I would love to see you do a back gammon game board.
It's a nice design but you can't play with them because you can see the dots through
I’m new to resin and just in the learning phase. I absolutely LOVE your videos and have just been binge watching your channel. Lol. I can’t wait to make my own creations. ❤️
I love this ,I think I'll have to try this myself lol. Good job dear
Those are so beautiful and cool. I may have to try to find the mold now.♥😊♥🤗♥
i don't know if any one saw it but there are two 3/4's. they are beautiful.
To paint the dots I dip my fingers in paint and drag across the domino and then wipe the domino on a paper towel so much fast and easier for me. Beautiful
Thanks for showing the box. Tins would be cool too.
What about gold sparkle? Is that possible.
You answered my question later in the tape thank you .
I haven't finished watching your video yet but you said something that just warmed my heart.... trying to see which cavities need more resin, you said "2nd from the right" - that reminded me of one of my favorite lines from one of the Star Trek movies "2nd star to the right & straight on till morning"
Think you will find that quote was originally from Peter Pan
@@wendyhood1962 Oh okay. Thank you but Peter Pan isn't one of my favorites.
Thank you for letting us see you pulling them out of the molds. I enjoy watching them being pulled out
there is a spray release formula to put on molds so they don't stick
I wanted her to flip them over so bad so I could see the back
ss 16 is the size of crystals you need and it take 168 of them
Hi Julie! Two things I’ve learned working with dominos...dust your mold with baby powder before you pour and secondly, Amazon sells a bag of tiny plastic bottles with a metal needle nose. I fill with acrylic paint and it works great for the dots and lines.
What is the baby powder do?
@@carolynboyd616 it helps release the dominos and I don’t have issues with bubbles on the bottom
@@carolynboyd616 it will not leave any blurred effect? Because of the bubble?
How long do you let them dry before removing them from the mold
How do u seal your dominoes? Very pretty!💜
Those are for decorations only not to play with
Pretty but dominos are not supposed to be transparent…
I had the same problem with my mold, I used demolding spray to help. These are fabulous!
Have you ever seen used Alcohol to pop your bubbles?
I use acrylic paint pens and they work great
But the dots are going to be seen from the back.
Can you send links to your tools please
Ind some,cn I place my order plz amazing
I used nail polish to color my dots and lines.
Can you see the dots from the back side
MAGNIFIQUE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Even with the few issues you had, it is a beautiful set! Absolutely beautiful. Next time you make a mold, pop a dot of silicone in that one that's missing a nib, to fix it, maybe. If you're going to use the mold again, so it's not a complete waste. I was wondering, could you use a piping bag and a bit of thin resin to fill the dots and lines, or is that line too thin for even that? Love the suggestion someone made of using the fine tip bottles. That will work wonderfully, I think. I love the boxes you found for them too. Thanks so much for sharing. I'm just a sucker for a good set of dominoes, I guess.. hehe
I would fill dots with resin too... Wondering why this way only appears one time ...haha.Thank you Julie!
Can u see thru them from the back side?
You are so creative
I like it....
I love it.....
I had the same set and it was missing a dot on the 4.
You have two 1/2’s
I would ask for my money back
💕💕💕💕💕💕💕loooooooooove it❗❗❗💕💕💕💕
I really like the dominoes!
how many grams it take??
There is a dominoes mold that is heat resistant that I purchased on Amazon if you have to use your blow torch. But you should spritz them with alcohol to get rid of the bubbles
مرحبا
Love the Domino set😍😍
You can see through them
I love your videos 😍 Big Fan! But even though there are some cheap-o molds out there, it’s kinda not fair to blame a mold for sticking when you are using a torch. Most mold makers say DON’T use a torch. Others comment on using alcohol spritz, or use a lighter. Long neck lighters are great for this.
Please don’t be upset with me for saying this, I REALLY LOVE YOUR WORK!!!
U can see the dots thru these