Dude! Thank you! Thanks to you I was able to determined that I can do this I got the 0x7000. I appreciate your clear and precise step by step guide. very helpful
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
Günni Hayirli I didn’t this, mine wasn’t hackable, just had to restart it and it started normally. It doesn’t modify your switch for this test. It doesn’t brick it. Hope that helps.
Dude thank you so freaking much trying to follow the guide on gba tempt just wasnt working. This video and the little details you add made it so easy to follow. My switch is actually hackable!!!!!! You're the best!!!
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
@@diegodiaz7674 it's a XAW4001 model. They said it was maybe hackable and I was so happy to see that it was hackable. I actually forgot about this comment. A year later I'm insanely comfortable with mods and the such. Haven't even been banned by nintendo and I play online very often
Still works today My switch said it was patched on many different sites, so I was looking to switch with my friends who was in the "maybe unpatched" category. I was also gonna pay extra money to swap. Not only did we see that his switch was patched, we also saw my switch was unpatched meaning I didn't have to transfer data or pay at all. Thanks
Hey man, i'm glad i found out my new switch is hackable. I had to sell the previous one due it was patched. Thanks a lot for the video, it was very helpful
very helpful! unfortunately mine is patched.... A tip for everyone trying to bridge pin 1 and 10, going into rcm but the console powering on when you connect the USB, also remove the left joycon from the console.
Thank you so much! Got my Possibly Patched Switch in mid July of 2018 so I was really unsure of if I could hack my Switch, but it turns out I have the exploit! Thank You!
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
@@otonashi2581 I am surprised to have a reply to a comment this old. I mean, it is pretty old relative to my usual reply rate, age, et cetera. But I gave up on obviously however long ago I posted that comment, probably a little before. And even now it is known that the only way to install CFW on patched switch is by purchasing and installing separate computer components to go into the Switch. Maybe I was wrong about what I said, I don’t know, I never use my Switch, I don’t care for newer systems, I collect older computers and video gaming systems. I got it for Christmas (I had actually wanted it only if I could win it in a contest, I didn’t), and was at least hoping I could install custom firmware like I did on my O3DS XL. The patch checking site said maybe, so I made a decent working paper clips jig, did the thing with the controller slot, I then purchased a USB to USB-C, and tried to load the payload. Didn’t work, so gave up, only searching now and again to see if people found a vulnerability in the software or other hardware component that would allow for the (what is known as) patched Switch to be hacked.
Thanks man so guys make sure to go to the smash file and run a compatibility test if it doesn't work. Let windows select the setting and when you open the exe it turns to a full window instead of a little minimize panel then you are good to do the path again. sadly mine is patched so that kind of pissed me off but thanks for the tips and hopefully me and the rest get the chance in the future.
Does checking the patched status of the Switch like this cause any permanent modification? I want to check but not if it rewrites files then instantly voids the system for official online use. Also, after you check it then what do you do to return to a regular boot up?
If it is patched there is NO way of modding it without a modchip. If you don’t know what a modchip is, it’s basically opening your switch and putting in a new CPU.
@@ItzLLaggyYT yo bro, im trying to do this payload thing, if my switch is patched will the recovery mod work? i've put correctly the tin foil but it start up as normal
Yes, take a screenshot of the list, and then if you see a switch on a shelf in a store, open your phone where you have the screenshot, on the box there should be a little cut out with the serial numbers, so you will know if it is hackable tl;dr check under the box, there will be a serial number on it, then you will know.
@Summitatem please help me when I do it in CDM all it says is opened USB device path after the final step then says uploading payload, and nothing after that
So mines said everything at the end expect for smashing the stack and the numbers. It stops at padded size 143360)… after that it goes blank. What’s going on?
Mine is in the possible patched group so, according to the video and some info I read I assume it is safe to do this test but I'd like to make sure. Is there any brick risk by doing this test if mine ends up being patched?
ABlake77 are you using a 3D printed jig? Or what to jump the pins? It can be very difficult to jump them sometimes, which is why many will disassemble the right joycon and put a switch between pins 1&10 or 9&10 so they can jump them for sure with that switch
ABlake77 are you using a 3D printed jig? Or what to jump the pins? It can be very difficult to jump them sometimes, which is why many will disassemble the right joycon and put a switch between pins 1&10 or 9&10 so they can jump them for sure with that switch
@@summitatem3425 I used my brother's 3D printed jig, his switch is hacked already, no trouble at all, but mine just didn't go after many tries. I'm not sure to disassemble the joycon especially 'cause I don't even know if my switch is hackable.
whenever i press enter it has a windows pop up that says "This app cant run on your pc, to find a version for your pc, check with the software publisher"
my switch is unpatch with official firmware 14.1 also shows x7000 but it wont to boot to atmosphere rcm menu after injecting fusee and hekate payload. I got instead a white flashing screen and it always rebooted to offical firmware. Im so lost and confused.
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
Hi, great video, super easy to follow, thank you!! Just a quick question, would it come up 0x0000 for all systems that have currently been updated to 7.0.0 regardless? Or if you had a hackable system would it still let you know that you're just on the wrong firmware? Sorry, I'm a noob..
Hardest part was jumping those fucking pins😠 After an hour going at it, it finally worked. I ran the cmd and it gave me the 0x0000 code. RIP. Thanks for uploading this though.
unfortunately my switch is possibly patched. and after I did exactly with the video. it's show 0x0000 meaning it's patched. no. still. I love your video. I hit on LIKE button.
Quick question if I’m going to try this and it is patched do I need to do anything to remove the rim loader or? Will it just remain loaded indefinitely?
when i try to inject the rcm jig my switch gave me an error turned itself of restarted gave another error my sd card was corrupt then my switch gave a orange brick screen after that my switch worked normally any idea how that was possible?
That's not normal even if it is patched if you got an orange screen it probably means the payload did inject your SD card is just probably messed up lmfao, try formatting to fat32
Need yogur help, I installed the drivers and the button did not grayed out. But i went into the control panel and saw that the drivers are there. So I connect my switch but does keeps showing as “no RCM” on tegra as my computer is not recongnizing my Nintendo Switch. How can I fix that?
Yo Summitatem, I didn't get a screen that looked like that in the command prompts and there was no smashed stack numbers. does that mean my switch is patched?
Hi, can anyone help? Mine does show 0x7000 but the command prompt stops at SBK and on the switch's screen it says error getting TSEC. Edit: Nvm I used the payload from the Switch Ultimate Noob Guide and says I am good to go. Going to follow the rest of the guide for CFW, seems to be the most up to date guide currently.
Dude! Thank you! Thanks to you I was able to determined that I can do this I got the 0x7000. I appreciate your clear and precise step by step guide. very helpful
Jorge Perez did you buy a jig?
What are you serials
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
My switch is patched, but the video was very useful anyway. Thanks
Sorry to hear that :(
same
Are your Switches now bricked or can you Use them as normal
Günni Hayirli I didn’t this, mine wasn’t hackable, just had to restart it and it started normally. It doesn’t modify your switch for this test. It doesn’t brick it. Hope that helps.
I don’t want to believe mine is patched! 😭 I’m gonna wait.. hopefully something comes out?? I wanted to play Golden Eye multiplayer..
Right clicking and selecting "open file location" works too lol great video regardless
Dude thank you so freaking much trying to follow the guide on gba tempt just wasnt working. This video and the little details you add made it so easy to follow. My switch is actually hackable!!!!!! You're the best!!!
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
@@diegodiaz7674 it's a XAW4001 model. They said it was maybe hackable and I was so happy to see that it was hackable. I actually forgot about this comment. A year later I'm insanely comfortable with mods and the such. Haven't even been banned by nintendo and I play online very often
Still works today
My switch said it was patched on many different sites, so I was looking to switch with my friends who was in the "maybe unpatched" category. I was also gonna pay extra money to swap.
Not only did we see that his switch was patched, we also saw my switch was unpatched meaning I didn't have to transfer data or pay at all.
Thanks
How is number your switch
How mine won't even load the results of the biskey dump it gets stuck on opened usb path and never progress any further
did you figure it out mine does same thing
@@notyaboymatty5907
Had a refubished model by nintendo, website said its probably patched,
Turns out it wasn't! :)
Cool beans, How recent was that?
RonnShad Just the other day. You’ll find them just try to get them pre-owned
XAJ4005?
@@iruthl3ss916 What were your serial number digits?
Hey man, i'm glad i found out my new switch is hackable. I had to sell the previous one due it was patched. Thanks a lot for the video, it was very helpful
Glad to hear it helped out! 👍
Wait what was the serial prefix?
i keep getting "couldnt open payload file ""biskeybump"" for reading"
My switch is 0079 so I wasn't sure if it was patched so thank you this video helped alot
LETS GOOO BABY. 0x7000 on my XAW1007. Atmosphere here i come
I'm XAW10079 🥶🥶
very helpful! unfortunately mine is patched.... A tip for everyone trying to bridge pin 1 and 10, going into rcm but the console powering on when you connect the USB, also remove the left joycon from the console.
What did you use to make bridge the pins. Cause I’m having some problems with that party
@@fishwithadish720 I used a bendable metal pin. It needs some tries but with some patience it will happen.
Thank you so much! Got my Possibly Patched Switch in mid July of 2018 so I was really unsure of if I could hack my Switch, but it turns out I have the exploit! Thank You!
YWNBAW
@@danny7625 get bent asswipe
@@stephybloops I'm sorry
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
@@diegodiaz7674 bigger question is when you got your switch. They started patching in august of 2018
if my switch is patched, will there be a future firmware to be able to jailbreak patched switch?
THERE IS SEARCH ON TH-cam
Thank you for this video it was extremely helpful 👍
This video was very helpful. Thanks so much.
You can also just try to send multiple different payloads. If the screen stays black, then you know.
I tried to send fusee but my screen stayed black , but the serial says it’s not patched
@@otonashi2581 I am surprised to have a reply to a comment this old. I mean, it is pretty old relative to my usual reply rate, age, et cetera. But I gave up on obviously however long ago I posted that comment, probably a little before. And even now it is known that the only way to install CFW on patched switch is by purchasing and installing separate computer components to go into the Switch. Maybe I was wrong about what I said, I don’t know, I never use my Switch, I don’t care for newer systems, I collect older computers and video gaming systems. I got it for Christmas (I had actually wanted it only if I could win it in a contest, I didn’t), and was at least hoping I could install custom firmware like I did on my O3DS XL. The patch checking site said maybe, so I made a decent working paper clips jig, did the thing with the controller slot, I then purchased a USB to USB-C, and tried to load the payload. Didn’t work, so gave up, only searching now and again to see if people found a vulnerability in the software or other hardware component that would allow for the (what is known as) patched Switch to be hacked.
@@MattIsTheCat mate, you sound like an absolute wank stain
Got the lovely 0x7000 WOO I'm so excited rn! So glad I got one early on, tme for TOTK in 4K baby!!!! Thanks man, I was ready to sell mine
Can i brick my switch if just inject any payload like atmosphere? My switch say "posibly patched"
Up for this can anyone clarify?
If it’s patched, when you try injecting the payload, nothing will happen, it won’t brick, it just won’t turn on into cfw mode, only normal mode.
@@DAGzex so u can't play games on it?
@@DAGzex basically unusable
The serial number on mine is XK. It's not any of the serial numbers on that list. Does that mean its patched?
Yeah mine too. I have a xkw5 switch so if you find out if it’s patched or not let me know
Thanks man so guys make sure to go to the smash file and run a compatibility test if it doesn't work. Let windows select the setting and when you open the exe it turns to a full window instead of a little minimize panel then you are good to do the path again. sadly mine is patched so that kind of pissed me off but thanks for the tips and hopefully me and the rest get the chance in the future.
how long does it generally take to upload the payload? its been on uploading payload for a good handful of minutes now
same did yours ever upload, because i don’t want to sit here for nothing.
Mine took seconds
it will show the same 0x00000 when u inject payload to the patched switch on tega.
Xkw doesn’t even show up on the serial list
means its 100% patched
Can you do a guide or link me to one of your right joycon mod for rcm? Can this mod cause hardware issues or a ban?
restart your pc if the rcm isn't saying okay after installing drivers
Mine didn't say smashing the stack
and smashed the stack
it only said uploading the payload
JAMES PETERSON did it work or still? I’m like u btw
@@justaguywithoutamustache8075 same, will it work or should i stop waiting?
Does checking the patched status of the Switch like this cause any permanent modification? I want to check but not if it rewrites files then instantly voids the system for official online use. Also, after you check it then what do you do to return to a regular boot up?
If it is patched there is NO way of modding it without a modchip. If you don’t know what a modchip is, it’s basically opening your switch and putting in a new CPU.
@@Spletzwell actually it's putting in a new chip 🤓
@@ItzLLaggyYT I posted this a while ago when I didn’t know much about switch modding I’m much more experienced now 💀
@@Spletz lol
@@ItzLLaggyYT yo bro, im trying to do this payload thing, if my switch is patched will the recovery mod work? i've put correctly the tin foil but it start up as normal
Thank you for this video. It was helpfull
Hi my switch said 0x700 but on the end said "Win32 error 31 during post-smash read op"
What if its stuck on smashing the stack
Does this work when using a Mac?
Mine gets stuck on either “opened usb device path” or “uploading payload…” and then doesn’t load any further than that. Why?
What's the link shown @ the Beginning of this Video?
Hi, is there anyway to check “is it hackable or not” before buying the console?
Yes, take a screenshot of the list, and then if you see a switch on a shelf in a store, open your phone where you have the screenshot, on the box there should be a little cut out with the serial numbers, so you will know if it is hackable tl;dr check under the box, there will be a serial number on it, then you will know.
Eryk Terepet thank you so much bro. Have a wonderful day :)
@@CemBYldrm No problem, have a good day too.
Guilherme Filipe Ávila Araújo Antunes OK I’ll do that. Thanks for the pro tip :)
Mine tells me "Program' is not recognized as an internal or external command,
operable program or batch file." in command prompt
what if it stucks at uploading payload?
mine stuck too, any answers ?
The website says my switch is possibly patched but then the list at the start of your video says its definitely patched. :(
mine says [ -V 0x0955] [ -p 0x7321]
so what does this mean is it hackable or not
when i first tried i got 0x00000 then the second time it was just stuck and not loading so does that mean my switch is patched?
Mine says "this app can't run on your PC"
Thanks I will try it, Does this affect in any way the switch, meaning that if this could potentially brick it?
All unauthorized modifications to any device are in some way potentially dangerous
@Summitatem please help me when I do it in CDM all it says is opened USB device path after the final step then says uploading payload, and nothing after that
My switch is not patched... POKEMON RANDOMIZER HERE I COME.
It's hackable, THANK YOU SO MUCH
My switch is not patched does that mean its hackable
And can i use any mod? Like cfw something like that and home brew
So mines said everything at the end expect for smashing the stack and the numbers. It stops at padded size 143360)… after that it goes blank. What’s going on?
I know hac001(-01) is not hackable, but why does everyone say there will *never* be one
@Iffub no, I was wrong it actually IS hackable by soldering but soldering sucks lol.
Mine is in the possible patched group so, according to the video and some info I read I assume it is safe to do this test but I'd like to make sure. Is there any brick risk by doing this test if mine ends up being patched?
ABlake77 no risk by doing test
@@summitatem3425 Thanks for the reply, actually I tried already but for some reason it just won't enter to RCM:( the Nintendo logo always shows up
ABlake77 are you using a 3D printed jig? Or what to jump the pins? It can be very difficult to jump them sometimes, which is why many will disassemble the right joycon and put a switch between pins 1&10 or 9&10 so they can jump them for sure with that switch
ABlake77 are you using a 3D printed jig? Or what to jump the pins? It can be very difficult to jump them sometimes, which is why many will disassemble the right joycon and put a switch between pins 1&10 or 9&10 so they can jump them for sure with that switch
@@summitatem3425 I used my brother's 3D printed jig, his switch is hacked already, no trouble at all, but mine just didn't go after many tries. I'm not sure to disassemble the joycon especially 'cause I don't even know if my switch is hackable.
Smashed the stack with 0x7000 💪🏼
whenever i press enter it has a windows pop up that says "This app cant run on your pc, to find a version for your pc, check with the software publisher"
You're using Windows 10, right?
@@Cyorg13 yes
same thing for me was there a fix?
Excuse me but version is your switch? (I have the same exact ACNH 2020 switch but I want to make sure)
All custome switches are patched e.g animal crossing, smash bros, Fortnite etc
@@ItzLLaggyYT I think the Pokémon let's go pikachu and let's go eevee switch isn't patched not sure tho
@@NoGoodNameHelpPLZ if they're released before August 2018
my switch is unpatch with official firmware 14.1 also shows x7000 but it wont to boot to atmosphere rcm menu after injecting fusee and hekate payload. I got instead a white flashing screen and it always rebooted to offical firmware. Im so lost and confused.
mine starts with xkj is it moddeble
Red box = patched
thanks a lot bro!!
my switch can hackable
my serial number said are possibly patched
so i check my switch from ur video
ruben santoso glad to hear! 👍
What were your serial number digits?
What was the serial number on your switch (you would only have to give some digits of the serial number and not all digits)? I'm asking because I want to mod my switch.
My Switch is possible Patched. What should i do now?
Idk...you can still get an exploit apparently
Hi, great video, super easy to follow, thank you!! Just a quick question, would it come up 0x0000 for all systems that have currently been updated to 7.0.0 regardless? Or if you had a hackable system would it still let you know that you're just on the wrong firmware? Sorry, I'm a noob..
Deez Ku-Nuts i have my switch updated to 7.01 and it still came up 0x7000, so i dont think it has anything to do with the software
When I plug the usb c in, it will begin charging and the switch will start up again. How do I put the usb c in correctly?
Hardest part was jumping those fucking pins😠
After an hour going at it, it finally worked. I ran the cmd and it gave me the 0x0000 code. RIP. Thanks for uploading this though.
When I enter the last command I get. This app can’t run on your pc? Any idea?
I don’t see the smashed the stack with part
mine says Smashed the stack with a 0x0002 byte SETUP request! what does this mean?
I see this too
V 1.5 model lmao
If it's red box it's patched if you want to see if it works then just get an SD card and try atmosphere but most likely it won't work
unfortunately my switch is possibly patched. and after I did exactly with the video. it's show 0x0000 meaning it's patched. no.
still. I love your video. I hit on LIKE button.
Thank you! I really appreciate it! Sorry to hear about the bad luck you had =\
What were your serial number digits?
@@senzukan9224 it's XAW7002715. it's possible patch with unknown firmware out of the box. I did exact what's in the video. well, you know the rest.
mine just doesnt load after it says uploading payload
Mine is "possibly patched" can it still be modded?
Idk it says the same for me and im trying to figure it out
Mine says possibly patched on 2we sites so far does that mean it’s proppably modable
My switch url starts with XKJ what do i do?
Red box = patched, if it says anything above 2019 or 2019 on the back it's patched
@@ItzLLaggyYT bro responded a year later💀
@@matheomalmin6933 mb lmfao
@@matheomalmin6933 uhh
And is this still relevant or newer method
Will it damage the switch if i run a payload ?
Quick question if I’m going to try this and it is patched do I need to do anything to remove the rim loader or? Will it just remain loaded indefinitely?
Devilxflair29 just power cycle the Switch to return it to normal boot pattern
My switch is patched. Do you think there will be any alternative hacking in the future?
Hopefully so. Staying optimistic
@@summitatem3425 if its patched, does that mean itll always be patched?
says cannot find path specified but its the same path .....
it says this app cant run on my computer i use windows 10 i dont understand and im an administrator
it doesnt say smashed the stack with a 0x7000 or 0x0000 byte setup request
Soo I did everything and it got stuck on “uploading payload” it’s good or not
Did you find out?
@@hectormedina3357old new but my switch isn’t hackable the version is different
could not open data file 0x0 for reading
Same here
@@macgyver3944 anyone find out why error reading? same issue here
So im not getting the same screen im jist getting paylead upleaded successfully does that mean my swotch in unpatched ? Im unsure
when i try to inject the rcm jig my switch gave me an error turned itself of restarted gave another error my sd card was corrupt then my switch gave a orange brick screen after that my switch worked normally any idea how that was possible?
It's patched
That's not normal even if it is patched if you got an orange screen it probably means the payload did inject your SD card is just probably messed up lmfao, try formatting to fat32
my nintendo is xaj4006800 red can i do this to see my switch can hack or divinitif patch
my switch is patched
f
RIP
Thank you for the tutorial
I hope something comes out soon to hack patched switch models, foolishly updated to 10.0.1
f
Need yogur help, I installed the drivers and the button did not grayed out. But i went into the control panel and saw that the drivers are there. So I connect my switch but does keeps showing as “no RCM” on tegra as my computer is not recongnizing my Nintendo Switch. How can I fix that?
So if its patched, does it mean we can’t run fuse gelee?
@@aviwad RIP De ja Vu :(
@@aviwad SAME SAME SAME haha mine's also on 5.1 and on airplane mode. Fingers crossed.
Was only able to read 4 out of 16 bytes of device id?
Do I need the blue controller
how do you jump the pins? i cant see anything when he shows it
th-cam.com/video/JMpneHNWIC4/w-d-xo.html to make one
does it long to get the results??
thanks for the vid. Does the cmd window show the serial number at the end of the results?
Bummer... I really wanted to put Android onto my Switch, but it turns out, I have one of the XAJ4006XXX models, which are definitely patched.
I got XAW10027544944
Don't rule it out without doing the test on it.
My switch is a XAJ4008XXX and it is hackable.
@@imdyinghelpme Really? I have XAJ40047XXX and not sure if I should try
@@imdyinghelpme mine is XAJ4005 can my one be hacked my laptop just broke so I can't try it
thank you very much
you saved me
Glad it helped out!
i'm from germany and my englisch is not so well
for safety: 0x7000 is good. right?
@@summitatem3425
@@niyazikeser Yes. 0x7000 is good 😄👍
Thank you so much, yaaaay
can i do this without the paperclip? i am scared that i will get to the wrong ones and break it
a little late but you can use tin foil!
What if my switch is patched?
You won't be able to hack it at the current time then
Avi Wadhwa really ? that was good news for sure .. i was version like 6.20
Yo Summitatem, I didn't get a screen that looked like that in the command prompts and there was no smashed stack numbers. does that mean my switch is patched?
Same here it's like mine just isn't smashing the stack
Is it safe to do this?
What’s the down fall of a hackable switch?
I'm somehow In the range where I both feel like I want to do this but at the same time I also feel like I can't do it.. :/
Not that I would try to homebrew my switch anyway. Now, if I got another switch that was hackable, now that would be a whole 'nother story.. ;|
XAW10105 is what?
patched.
i have the exact same one
@@danseyelash4370 What were your serial number digits?
@@danseyelash4370 also wdym you had the exact same one?
Do you mean that your serial numbers starts with "XAW1" and it was patched?
Nintendo switch Mario kart bundle Is patched???
Is there anyway to mod a patched switch?
Hi, can anyone help? Mine does show 0x7000 but the command prompt stops at SBK and on the switch's screen it says error getting TSEC. Edit: Nvm I used the payload from the Switch Ultimate Noob Guide and says I am good to go. Going to follow the rest of the guide for CFW, seems to be the most up to date guide currently.
It is a great guide, highly recommend them!
Do we need to backup NAND first then use this method or otherwise? Thanks before