For 3d printing tolerance issues you can try to fix them by: - heat up with heat gun (or hairdryer) - place it in intended postion - place book + weight on it until it cools This usually fixes my issues about 70% of the time
5:20 They were printed with the top part pointing up creating floating overhangs. Would they have been printed with the top pointing towards the build plate they would have had way better tolerances and a much nicer finish.
You could have sandpapered the non-lego bricks, you can see the 3d printed patterns on it. You should do it, and then pass some semi glossy protective on top to uniform the look, and the shine should automatically make it more similar in color to the real lego ones. Also you should work with a cutter or a hobby knife under the piece of track that always pop-ups and doesn't stick properly, cutting the excess and reworking it carefully until it fits better
Thanks, these are fantastic suggestions! 😁 I will definitely see about improving those pieces for the next layout update. It always bugged me that they didn't have that same shiny finish.
If these peices could be printed with ABS, you could give them a short acetone bath after a light sanding. it would smooth the surfaces and make it shiny like injection-molded lego. Only risk there is potentially morphing the part underneath and affecting tolerance. However, since an acetone bath only uses acetone fumes and no contact with liquid acetone is made, you could simply hold the outer facing peices over the acetone for 30-60 seconds and that might be enough without warping the other side.
I immediately thought of gundam building when I saw these and thought the same thing. If you get some abrassive pad you can get rid of the 3D printed texture and can even sand down that one piece that keeps wanting to stand up so it won't keepntrying to stand up anymore.
I might be imagining things, but I think one of the old trains (2010 era) had an X crossing that you had to assemble Edit: After searching online, it's just a TH-cam video I watched as a kid. I had the lego red train, 7938
I think if you raised the entire street level up by a few bricks, you could come up with some sort of purist S.N.O.T. technique to fill the gaps using slopes on their sides. I think that would look more uniform than your plate+jumper technique too. I understand however that for most people raising the entire street level of a Lego city by a few bricks would be unreasonable!
I'm a big Lego Trains fan, but I've been frustrated by the track system. R40 tracks are FAR too tight of a curve, and the 6-stud width limits the size of trains you can build (I'm a big fan of how well the Hogwarts Express Collector's edition works for minifigure scale, but it's 8 studs wide). Not to mention, they don't attach to other pieces very well (as shown in this video). I'm not familiar with the non-lego options that are available, but I want to learn more. What do you recommend?
I would recommend injection-molded track. It's got the same quality and finish as Lego. I've bought R56 from both BrickTracks and TrixBrix. Both products are great. For even wider curves, I looked quickly and saw that BrickTracks produces R104 (injection-molded) and TrixBrix makes up to R184 but only 3D-printed (which I'm not crazy about). I hope that helps! 😁
on 10:52 theres a piece that im assuming is a 2x2 with half studs half tile. its on the track piece near the bottom left of the video, where your little turn for the curb/sidewalk is. its black. please please change that to dark grey it'll look so much better!
Would be nice if those pieces were injection moulded with the same plastic Lego uses, but honestly, looks a bit like too niche of a thing to be financially viable.
I like it. A shame we have to go 3rd-party, but better than any true Lego attempt indeed. I have some Trixx as well and I acknowledge, that they are improving. They are still in a learning process so I hope we will get some solid products in the near future. At least they do care about trains, which LEGO lost interest in long time ago. With the occasional exception of some Bricklink sets.
Had to point it out... at 0:29 the Y-intersection for the train tracks has the trains approaching from the left side turning left into ONCOMING TRAFFIC. the trains approaching from the top turn right, again into ONCOMING TRAFFIC. That is not how a Y-intersection should look on this road my guy! That turn between top and left should either be connected to the right side of the top road or the right side of the left road. In this configuration any train using it will be driving head-on into traffic.
this looks so nice :D please do more of that. This looks so clean and its interesting to see how you can solve such problems like how to fill the space between the track! Definitely needs more attention!
@@redbaron7486 some of your 3D-printed LEGO pieces are inspired by existing LEGO parts. You might be to superglue the inspired real Lego pieces to make a replica of that 3-D printed piece if that makes sense
@@hypocritehaterofficial3283 It sounds possible. but on my original point, an injection moulded piece would still be very pricy since they'd need to buy a mould and a machine for injection moulding.
That's the one that came with the set! Most of the buildings that are supposed to be from New York City (like the Sanctum Sanctorum, Daily Bugle, Avengers Tower), actually all have black fire hydrants 😄
Why is the color more important than the functionality? If your lego buildings catch fire and theres no water pressure then the lego firemen wont be able to help
I have no issues with using none lego pieces in general. I think lego purism is silly but those colors are not even close to matching the original lego color so it looks pretty meh due to colors. Plus there are completely obvious texture differences. Some not too bad with others having literal line grains from the printing process. Why not just use regular legos and just cut/grind/polish them to size? That would look way better. Especially for the outer road part (the squares on the outside of the track). That should not he very difficult and should look way better. Not sure if you could easily do that for the inner track so using those peinted pieces wouldn't be too bad. There are people who have found methods nearly perfect with using actual lego pieces. I forget the channel that pulled it off. Obviously some minor gaps but looked really good. Also if one is popping up just super glu it. No reason not to since you aren't a lego purist. *shrug* Can you not design a method to fill in those corner holes? They look terrible unless you can somehow make them look like a drain.
That's actually a really great suggestion to cut/grind some Lego tiles to size for the outer road sections! I could use the 3D-printed parts as a guide to get the size just right. I'll definitely look into that. As for the corner holes, the 2x2 modified tiles just need to be replaced with grey ones. I'll fix that soon 😅
@@danjotrains cool cool, glad I was helpful. I wish I remembered but someone on TH-cam with a fairly large channel I think maybe 1xxk followers or high 10k followers had a really good all lego part design not perfect but pretty good looking. It was a "modern city i think and i think he had a fairly thin build like only 2 feet or so deep or at least for that one part with the train/road. But it was like a year or 2 ago I saw the channel so sorry I can't just give you a direct link. Just remember lego pieces when cut will show the internal structure and not that nice clean edge so you'll need to figure out a way to hide it. Also, you could always consider stickers like custom printed stickers with a pattern to hide something or even use custom printed stickers to show dirt, trash, street marking, or whatever might be good or interesting for story telling or covering up something. Pros and cons like all things do.
@08:55 Who the F prints *_AND_* sells such Tiles Right-side Up thus showing the visible Top Layer Print Lines instead of Upside Down *_AND_* on a glossy Build Plate for a smooth and original LEGO Tiles matching finish!? 💢
Good catch, I didn't notice the print lines on that piece before! I'll be doing some work on the 3D-printed tiles soon to see if I can get a nicer finish on them 😁
@@wesleyandrews9198No, it’s just purists and it makes total sense. Some people don’t like this type of stuff because it’s not actually lego, purism, perfectly fine, it’s his opinion, no need to be rude.
@@doursenMy thought's exactly. Everyone has their own preferences. It is cool that people have made this option for people who want it, but it's alright if people don't like this for a solution. He does give options in the video for the Lego purists out there.
3D printing is good for prototyping - but for production it is utterly crap (at least for normal FDM printers with plastic). The tolerances are bad, the surface needs a lot of work, they are not strong either. And the price also is way too high (yeah, who knew - 3D printing is time-consuming and really pricey.)
I'm always hoping Lego will eventually come out with some official fancy curve tiles that I could use instead 😄 But I'll try working the surfaces and adding a finish to see if I can improve the pieces.
For 3d printing tolerance issues you can try to fix them by:
- heat up with heat gun (or hairdryer)
- place it in intended postion
- place book + weight on it until it cools
This usually fixes my issues about 70% of the time
Idc that it's not lego, I love it bro
Thanks! 😁
5:20 They were printed with the top part pointing up creating floating overhangs. Would they have been printed with the top pointing towards the build plate they would have had way better tolerances and a much nicer finish.
Lego builders are the most creative people lmao
You could have sandpapered the non-lego bricks, you can see the 3d printed patterns on it. You should do it, and then pass some semi glossy protective on top to uniform the look, and the shine should automatically make it more similar in color to the real lego ones.
Also you should work with a cutter or a hobby knife under the piece of track that always pop-ups and doesn't stick properly, cutting the excess and reworking it carefully until it fits better
Thanks, these are fantastic suggestions! 😁 I will definitely see about improving those pieces for the next layout update. It always bugged me that they didn't have that same shiny finish.
That's a great idea!
If these peices could be printed with ABS, you could give them a short acetone bath after a light sanding. it would smooth the surfaces and make it shiny like injection-molded lego. Only risk there is potentially morphing the part underneath and affecting tolerance. However, since an acetone bath only uses acetone fumes and no contact with liquid acetone is made, you could simply hold the outer facing peices over the acetone for 30-60 seconds and that might be enough without warping the other side.
I immediately thought of gundam building when I saw these and thought the same thing. If you get some abrassive pad you can get rid of the 3D printed texture and can even sand down that one piece that keeps wanting to stand up so it won't keepntrying to stand up anymore.
Lego should sell these modules. Include a X crossing as well
I like the idea of an X crossing!
@@danjotrains I believe there used to be one, for the old 9 volt tracks
Alternative suppliers have solutions for problems Lego doesn't solve. Including curves with different radii.
I might be imagining things, but I think one of the old trains (2010 era) had an X crossing that you had to assemble
Edit: After searching online, it's just a TH-cam video I watched as a kid. I had the lego red train, 7938
@@mushroomcraft Maybe you're thinking of the 12V system? There was also one for 9V
I think if you raised the entire street level up by a few bricks, you could come up with some sort of purist S.N.O.T. technique to fill the gaps using slopes on their sides. I think that would look more uniform than your plate+jumper technique too. I understand however that for most people raising the entire street level of a Lego city by a few bricks would be unreasonable!
LEGO really needs to make a solution for this
beautiful work.
Its a small thing but props for your music choices throughout this. I found it very chill and relaxing
Love the mini Diagon Alley and 123 Seasame Street
That was very satisfying
The sesame street moc looks great
I can't wait to see this compleet and working.
I'm a big Lego Trains fan, but I've been frustrated by the track system. R40 tracks are FAR too tight of a curve, and the 6-stud width limits the size of trains you can build (I'm a big fan of how well the Hogwarts Express Collector's edition works for minifigure scale, but it's 8 studs wide). Not to mention, they don't attach to other pieces very well (as shown in this video). I'm not familiar with the non-lego options that are available, but I want to learn more. What do you recommend?
I would recommend injection-molded track. It's got the same quality and finish as Lego. I've bought R56 from both BrickTracks and TrixBrix. Both products are great. For even wider curves, I looked quickly and saw that BrickTracks produces R104 (injection-molded) and TrixBrix makes up to R184 but only 3D-printed (which I'm not crazy about). I hope that helps! 😁
cool city my guy cant wait to see more !
That’s fucking dope it looks clean
I don't know which bothers me more. The 3D-printed bootlegos, or the black 2 x 2 jumper plate under the corners of the sidewalk. 🤣 Great video.
Ahaha thanks 😁 And I will eventually get around to changing those jumper plates.
This is awesome!
Waiting patiently for the follow up switch video
It's definitely planned! But I'll be focused on finishing all the road plates first 😄
just watched the whole playlist so far and it looks great! keep up the nice work :)
Thanks! 😄
on 10:52 theres a piece that im assuming is a 2x2 with half studs half tile. its on the track piece near the bottom left of the video, where your little turn for the curb/sidewalk is. its black. please please change that to dark grey it'll look so much better!
Great catch! I will definitely replace that for dark grey.
Very informative!
Would be nice if those pieces were injection moulded with the same plastic Lego uses, but honestly, looks a bit like too niche of a thing to be financially viable.
Trixbrix is slowly making more and more injection moulded pieces as time goes on, so it's possible!
Can you build a 4-8-8-4 big boy or 4-8-8-2 ac12 cab forward for this series as i would like to know how you would do so in lego
I've always wanted to build an 4-8-8-2 AC12 cab forward!
In the old days the beams and rails were loose part less complicated than this one piece rail part, 😮, but a challenge I believe 😂
Do you mean the 12V rails? I never thought of those. That might actually make it easier to build these roads!
Very nice
I like it. A shame we have to go 3rd-party, but better than any true Lego attempt indeed. I have some Trixx as well and I acknowledge, that they are improving. They are still in a learning process so I hope we will get some solid products in the near future. At least they do care about trains, which LEGO lost interest in long time ago. With the occasional exception of some Bricklink sets.
Woow, so cool!
Thank you!
Nice video!
Thanks!
Had to point it out... at 0:29 the Y-intersection for the train tracks has the trains approaching from the left side turning left into ONCOMING TRAFFIC. the trains approaching from the top turn right, again into ONCOMING TRAFFIC. That is not how a Y-intersection should look on this road my guy! That turn between top and left should either be connected to the right side of the top road or the right side of the left road. In this configuration any train using it will be driving head-on into traffic.
Good catch! I didn't think about the direction of the traffic 😄
this looks so nice :D please do more of that. This looks so clean and its interesting to see how you can solve such problems like how to fill the space between the track! Definitely needs more attention!
Thanks! I promise there's definitely more to come 😁
11:02 is that the ford falcon cobra V8 interceptor from mad max saga?
It's the 1970 Dodge Charger from Speed Champions! But I would love to build a Mad Max V8 interceptor 😁
Silly kitty.
Can you please share the design file for the module? I could really use these covers in my small lego city for my tram line
Sure thing, I'll see about adding them to Rebrickable soon!
@@danjotrains I meant the 3d printed part
@@belairmp3130 Those I bought from Trixbrix, so no file unfortunately.
why do you not fill in the road under the round corners of the pavement
I honestly ran out of dark grey pieces 😅 but they'll be fixed in the next layout video!
@@danjotrains i thought it was on purpose 😂fair play man
trip bricks person should instead of 3-D printing it injection mould it that would be awesome
Yes, I always try to use injection moulded parts over 3D-printed ones whenever I can. They're always high quality!
You should try resin 3D printing
Yeah but injection moulds are really pricey
@@redbaron7486 some of your 3D-printed LEGO pieces are inspired by existing LEGO parts. You might be to superglue the inspired real Lego pieces to make a replica of that 3-D printed piece if that makes sense
@@hypocritehaterofficial3283 It sounds possible. but on my original point, an injection moulded piece would still be very pricy since they'd need to buy a mould and a machine for injection moulding.
looks good. how come the fire hydrant is black in seseme street? shouldnt it be red?
That's the one that came with the set! Most of the buildings that are supposed to be from New York City (like the Sanctum Sanctorum, Daily Bugle, Avengers Tower), actually all have black fire hydrants 😄
Why is the color more important than the functionality? If your lego buildings catch fire and theres no water pressure then the lego firemen wont be able to help
Never thought you could do that with Lego train tracks :0
Absolutely amazing, only question i have is how will tiling the switch tracks over work?
I'm open to suggestions! If I don't come up with a better idea, I might have to 3D-print my own parts 😅
Why does it switch the side of the road it's on
The idea is that train should be going counter-clockwise around the city, same direction as the traffic!
Its looks like Amsterdam
Krautz 💀
Glue them down
I need software of 3d printed piece
The 3D printed pieces are a product from Trixbrix (check out "Pavement for Quarter Circle R40")
@@danjotrains thanks
6:35 jobby??
My is even gake lego when i saw a gake lego produck i would be shock like ii dont even carw if its fake lego
I have no issues with using none lego pieces in general. I think lego purism is silly but those colors are not even close to matching the original lego color so it looks pretty meh due to colors. Plus there are completely obvious texture differences. Some not too bad with others having literal line grains from the printing process. Why not just use regular legos and just cut/grind/polish them to size? That would look way better. Especially for the outer road part (the squares on the outside of the track). That should not he very difficult and should look way better. Not sure if you could easily do that for the inner track so using those peinted pieces wouldn't be too bad.
There are people who have found methods nearly perfect with using actual lego pieces. I forget the channel that pulled it off. Obviously some minor gaps but looked really good.
Also if one is popping up just super glu it. No reason not to since you aren't a lego purist. *shrug*
Can you not design a method to fill in those corner holes? They look terrible unless you can somehow make them look like a drain.
That's actually a really great suggestion to cut/grind some Lego tiles to size for the outer road sections! I could use the 3D-printed parts as a guide to get the size just right. I'll definitely look into that.
As for the corner holes, the 2x2 modified tiles just need to be replaced with grey ones. I'll fix that soon 😅
@@danjotrains cool cool, glad I was helpful. I wish I remembered but someone on TH-cam with a fairly large channel I think maybe 1xxk followers or high 10k followers had a really good all lego part design not perfect but pretty good looking. It was a "modern city i think and i think he had a fairly thin build like only 2 feet or so deep or at least for that one part with the train/road.
But it was like a year or 2 ago I saw the channel so sorry I can't just give you a direct link.
Just remember lego pieces when cut will show the internal structure and not that nice clean edge so you'll need to figure out a way to hide it.
Also, you could always consider stickers like custom printed stickers with a pattern to hide something or even use custom printed stickers to show dirt, trash, street marking, or whatever might be good or interesting for story telling or covering up something.
Pros and cons like all things do.
what program is this?
I think it’s bricklink studio but I’m not sure, if only he said it or something 😔
Bricklink Studio. You can download it for free 😄
@08:55 Who the F prints *_AND_* sells such Tiles Right-side Up thus showing the visible Top Layer Print Lines instead of Upside Down *_AND_* on a glossy Build Plate for a smooth and original LEGO Tiles matching finish!? 💢
Good catch, I didn't notice the print lines on that piece before! I'll be doing some work on the 3D-printed tiles soon to see if I can get a nicer finish on them 😁
IM sorry but the3d printed pieces aren't lego and so it's just like i don't love them
Do you have a suggestion for a better solution?
They look fine
Then don’t watch.
@@wesleyandrews9198No, it’s just purists and it makes total sense. Some people don’t like this type of stuff because it’s not actually lego, purism, perfectly fine, it’s his opinion, no need to be rude.
@@doursenMy thought's exactly. Everyone has their own preferences. It is cool that people have made this option for people who want it, but it's alright if people don't like this for a solution. He does give options in the video for the Lego purists out there.
3D printing is good for prototyping - but for production it is utterly crap (at least for normal FDM printers with plastic). The tolerances are bad, the surface needs a lot of work, they are not strong either. And the price also is way too high (yeah, who knew - 3D printing is time-consuming and really pricey.)
I'm always hoping Lego will eventually come out with some official fancy curve tiles that I could use instead 😄 But I'll try working the surfaces and adding a finish to see if I can improve the pieces.
Not a fan, not LEGO
@Bob Brickman
Damn right my guy. Couldn’t have said it better myself