I hope next time please put caption. So that I'll understand what you are doing or what matterial you used. Anyway Thanks for sharing! Hope to see you more.
Ang galing naman. Thanks for sharing Kasi naghahanap talaga ako ng inspiration for Resin. Balak ko kasi yang maging small business din at mai add sa DIY vlogs ko. I like much what you did there ocean talaga dating!
This is a lovely idea and I'm gonna give it a try. Thank you for sharing, I enjoyed watching your content and look forward to watching your video's. I've subbed and switched on the bell.
Did you let it cure before adding the white paint? So it would be in 4 steps: do the sand first, let it cure, then add the blue let it cure, then add the white, let it cure and then add the clear? Looks Awesome!! Very cool!!
What liquid did you use I seen a container not water. And at the end did you use resin? Because it look thicker that water. I love it and if it’s just water even better less toxic. Beautiful love it!
I think it works if you only use a bit of it, the ones that I made long time ago that I gave to a friend still looks great, it’s just the blue color kinda faded just a bit.
Can you tell us what liquids you used to do the sanding please. I am very very new to resin making. I don’t understand what you mean by using the “catalyst “. Is it different from normal resin mix fir e.g. resin mix A and B ?
i do have question, but ur peices came out very nice. Wanted to ask of that Polyester Resin you mention you did not mix instructed Ratio but yet it worked, fornd interesting what are the pot time, and how long you wait for it to cure?
Honestly I just kinda experimented, my first ones didn’t came out that good as well, so it’s more of a trial and error for me until I found the right ratio that works for me, I haven’t made one of these in a long time so I already forgot the ratio that I used, I’m not a big expert on resin but there are lot of videos that show you how to mix it right so just look it up and you’ll probably get a proper explanation than what I can give you😅
@@waldosworkshop5441 :LoL yeah same here, had to take a Break cuz got resin on my hands and I would say looked burned in some parts of fingers, you know UV resin never gave me an allergic reaction till recently . i say this is my 3-4 time hands getting affected by Uv Resin and Epoxy resin, so gloves are now a must, reason I didn't put on gloves lat time was I was just gonna Run a few coats, of gloss but got excited and started working on more pieces so eventually got all on hands even washed them everytime I get it on hands but 2-3 later started seeing the reactions so stay sahe and wear protective gear, and Thank you for responding.
@@waldosworkshop5441 sa mga hardware po ba available sila?? Mga resin ko kase na tapos na may mga excess sya niliha ko kaso ang labo nya..diko alam kung anu number basta me nakita ako liha ayun kinuskos ko tapos ang labo nung na dry ang tubig
Yeah I agree, it’s a lot of work if you use this type of resin, but now I use UV resin so it’s a lot faster to make and it doesn’t take as much effort as before.
hamna meer you can use any type of sand that you like, I just had some sand left from decorating my aquarium so I just used that, sorry I don’t really have any links that I can provide you but you can try looking for it in any local petstores around your place or just get some from the beach
Tara Swanson that’s alright my first try ended up as a fail as well, you just gotta keep trying until you get it right, if you’re still having difficulties feel free to ask questions, and I’ll gladly help you out.
It depends, when I don’t get it as clear as I wanted it to with the wet/dry sand paper, I would spray 3 coats of gloss clear coat with a 10-15 min wait time In between coats to make it more see through and shinny
Ay pambihira ka naman hahaha anyways sinubukan kona sya tapos wala po ako sand ginawa ko asin tapos kinulayan ko ng acrylic na ang tone ay parang sa buhangin din tapos hinalo ko sa epoxy. Ang galing kase cure na sya ngayon ..oh ayan dami konapo nasabi dahil tagalog ka naman pala hahaaha
Your work is beautiful but very frustrating to watch and try to understand what you are doing without either dubbing instructions or captions to read For instance I have no idea what you used , especially in the white part to make the waves. 🥲
Sorry for the late reply I’ve been very busy with other things so I don’t have much time to respond, I just did it layer by layer making sure the first layer dries before I add another, all the layers are resin except for the one that I used for the waves, I just used a white acrylic paint to brush the waves on the resin, as long as you put a top coat of clear resin over it it should hold up just fine, the key chains that I gave to my coworkers a long time ago is still in good shape but I did notice that the blue color did fade a bit so I suggest using something else to add color to your resin
I hope next time please put caption. So that I'll understand what you are doing or what matterial you used. Anyway Thanks for sharing! Hope to see you more.
It's resin and sand at first. Then blue acrylic paint and resin. After painted with white acrylic paint.
I am new to resin but I am learning from talented people like you your work is gorgeous
It's amazing that you managed to get so much detail into something so small. We'll done these are great!!!!
Thank you 🙂
Your work was really helpful..i search how to make beach theme for my next project.
Wow! That's a very lovely idea! ❤🥰💞
Ang galing naman. Thanks for sharing Kasi naghahanap talaga ako ng inspiration for Resin. Balak ko kasi yang maging small business din at mai add sa DIY vlogs ko. I like much what you did there ocean talaga dating!
Beautiful work. Is there a list of items used?
Looks amazing. I’m a jewellery maker and going to give this a go. Thanks x
You’re welcome, and Good luck to you, I hope yours turns out great👍
Ohh my god wow
Amazing,magandang negosyo kabayan👍👍👍
So much satisfying..🥺✨✨
I thought you might have done something to make them shine on top. All the sanding took that away
This is a lovely idea and I'm gonna give it a try. Thank you for sharing, I enjoyed watching your content and look forward to watching your video's. I've subbed and switched on the bell.
this was actually really helpful thank you
Great job! Hope to see ur art more!!❤️
Thank you 😊
I wonder if that resin dust could be repurposed looll like to add white floating elements to a piece?
Hmmm, that’s an interesting idea but I haven’t tried it yet so Idk if it will work but I can give it a try
🎉Very cool 😎
What solution ur using in the sand paper?
Beautiful 💖
Excellent video. Thank you.
Did you let it cure before adding the white paint? So it would be in 4 steps: do the sand first, let it cure, then add the blue let it cure, then add the white, let it cure and then add the clear? Looks Awesome!! Very cool!!
GALING MO IDOL😁😵
What did you use to make the sand mixture? Was it real sand?
Good idea 👍
What did u use for white color
Great vid
Do you let the sand/resin mix dry before adding the blue? Great video!
Amanda Christensen-Goerd yes
Awesome thank you! Love this video! Xxx
Amanda Christensen-Goerd thank you🙂
do you have a written pattern tut for the ocean wave ? Joan
Het ziet er erg leuk uit bij jou maar bij mij ziet er toch echt anders uit. Heb je tips?
Amazing!
Nice 😍
What size of jump ring did you use?
What liquid did you use I seen a container not water. And at the end did you use resin? Because it look thicker that water. I love it and if it’s just water even better less toxic.
Beautiful love it!
I didn’t use any special liquids when I was sanding it, I just used water
I heard acrylic could ruin the work because it is water-based(?) looks good though! Thank you, I will try it
I think it works if you only use a bit of it, the ones that I made long time ago that I gave to a friend still looks great, it’s just the blue color kinda faded just a bit.
Waldo’s Workshop thank you so much for your help and advice ☺️ lovely video
Can you tell us what liquids you used to do the sanding please.
I am very very new to resin making. I don’t understand what you mean by using the “catalyst “. Is it different from normal resin mix fir e.g. resin mix A and B ?
Lindo trabalho Quais!
Por favor quais a numeração das lixas que você usou? Obrigada
Sand paper and what you used to shine them?
Did u sandpaper one side or both sides?
Which part did u sand the front or the back of it?? I love them
I sanded both sides but I sanded the front side more than the back.
How long do you sand for with each grit? Which grit do you use, and do you polish afterwards?
Very nice. I'm new to the hobby. Out of curiosity how much do you sell them for?
What type of sand paper you usually use?
can you use sand like glitter instead ofsand?
Nice... How to put the wholes in keychain?
The molds he used already has the holes
5:31 is that water you used on the sandpaper/why'd you do that?
Yeah it’s water, since I’m wet/dry sandpaper on it
What where the materials used
what size of jumpring do you use
Do you need to seal the white acrylic paint before adding resin on top? Xx
Amanda Christensen-Goerd you can do that, but I usually just let it dry and just pour that clear resin afterwards
Did you cure the resin before adding the white acrylic paint?
My thoughts also
You should always wear gloves and a respirator when working with resin and resin dust! It’s very bad for your lungs and cause lung damage.
Do you let the blue resin dry a bit before adding the white for the waves?
Yes
i do have question, but ur peices came out very nice. Wanted to ask of that Polyester Resin you mention you did not mix instructed Ratio but yet it worked, fornd interesting what are the pot time, and how long you wait for it to cure?
Honestly I just kinda experimented, my first ones didn’t came out that good as well, so it’s more of a trial and error for me until I found the right ratio that works for me, I haven’t made one of these in a long time so I already forgot the ratio that I used, I’m not a big expert on resin but there are lot of videos that show you how to mix it right so just look it up and you’ll probably get a proper explanation than what I can give you😅
@@waldosworkshop5441 :LoL yeah same here, had to take a Break cuz got resin on my hands and I would say looked burned in some parts of fingers, you know UV resin never gave me an allergic reaction till recently . i say this is my 3-4 time hands getting affected by Uv Resin and Epoxy resin, so gloves are now a must, reason I didn't put on gloves lat time was I was just gonna Run a few coats, of gloss but got excited and started working on more pieces so eventually got all on hands even washed them everytime I get it on hands but 2-3 later started seeing the reactions so stay sahe and wear protective gear, and Thank you for responding.
What is the ratio of catalyst to the casting resin?
Why do you sand them. New to this and trying to learn
I had to sand flat because the surface is uneven when the resin cures.
@@waldosworkshop5441 I'm curious what liquid did you pour in the sand paper? What is its purpose?
@@cheenygaspar1412 It's just water. It turns white as you're sanding from the resin dust.
The number of the sand papers you used ??
Where are the molds from?
Hello! What is the number of the 1st sand you used ?
I don’t remember exactly what it was but I think I started with either 120 or 220
@@waldosworkshop5441 sa mga hardware po ba available sila?? Mga resin ko kase na tapos na may mga excess sya niliha ko kaso ang labo nya..diko alam kung anu number basta me nakita ako liha ayun kinuskos ko tapos ang labo nung na dry ang tubig
Very pretty, but looks like a lot of work for something that sells for a few bucks?
Yeah I agree, it’s a lot of work if you use this type of resin, but now I use UV resin so it’s a lot faster to make and it doesn’t take as much effort as before.
What liquid u used at first n 2nd time to polish them.?
It’s just water
What is that liquid you used to sand the resin?
It’s just water
What did you put on each of th sand papers?
It’s water. It’s a special kind of sand paper
Hi! Is the white color pure acrylic paint?
Yes
Are used epoxy resin or polyster resin?
Polyester casting resin
Cute keychains. I didn't see a face mask listed- I hope you wore one with all that dangerous resin dust from sanding around you!
No need to worry, I was wearing one😅
They looked dull after all that sanding, I thought you would put a finishing top coat to add gloss
What kind of sand are you using?can you sent me link for purchasing?
hamna meer you can use any type of sand that you like, I just had some sand left from decorating my aquarium so I just used that, sorry I don’t really have any links that I can provide you but you can try looking for it in any local petstores around your place or just get some from the beach
How much do you sell them?
yna temporal just around $4-5
Awesome work! You sanded in this order: Sand paper(220, 400, 3000 grit)?
Yes, but you could also use 800 and 1500 grit after the 400 grit, I just didn’t wanna spend that much so I only got 3 grits of sandpaper
@@waldosworkshop5441 I tried this and had a miserable fail. LOL. Shows how truly great you are at what you do.
Tara Swanson that’s alright my first try ended up as a fail as well, you just gotta keep trying until you get it right, if you’re still having difficulties feel free to ask questions, and I’ll gladly help you out.
After you sand them do you put any type of gloss or do you just dry them ?
It depends, when I don’t get it as clear as I wanted it to with the wet/dry sand paper, I would spray 3 coats of gloss clear coat with a 10-15 min wait time In between coats to make it more see through and shinny
Just a suggestion, show sanding one, it wastes time showing each one being sanded, we get the point.
👍👏👏👏❤❤❤
Ay marunong po ba kayo? Magtagalog haha nahirapan pako mag english dito eh 😁
Marunong po, tagalog po ako eh😅
Ay pambihira ka naman hahaha anyways sinubukan kona sya tapos wala po ako sand ginawa ko asin tapos kinulayan ko ng acrylic na ang tone ay parang sa buhangin din tapos hinalo ko sa epoxy. Ang galing kase cure na sya ngayon ..oh ayan dami konapo nasabi dahil tagalog ka naman pala hahaaha
Thanks so much for not saying anything
To fast ,no idea what you are trying for,beach pieces are dull where’s the shine vibrant colours. Why all the sanding.
Your work is beautiful but very frustrating to watch and try to understand what you are doing without either dubbing instructions or captions to read For instance I have no idea what you used , especially in the white part to make the waves. 🥲
Sorry for the late reply I’ve been very busy with other things so I don’t have much time to respond, I just did it layer by layer making sure the first layer dries before I add another, all the layers are resin except for the one that I used for the waves, I just used a white acrylic paint to brush the waves on the resin, as long as you put a top coat of clear resin over it it should hold up just fine, the key chains that I gave to my coworkers a long time ago is still in good shape but I did notice that the blue color did fade a bit so I suggest using something else to add color to your resin