Join LMT Telegram Community : t.me/lastmomenttuitions Get All updates of Free courses , Engineering Problem Solved , Study Tips , Placement Preparation and Motivation
You have made a couple of mistakes 1) In the question, variance is given as 10.24. To find the value, you use Standard Deviation, not the variance. So, you should have taken the square root of 10.24, which is 3.2 2) Since level of significance is 5%, it is 2.5% on each side as it is a two-tailed hypothesis Z value would be: (6.2 - 5.4)/(3.2/sqrt(50)). This is coming as 1.77. As per your method, it would have been only 0.55 Since this is 2 tailed hypothesis, we have to look up the Z value for the probability of 97.5% (not 95%) on the right hand side, which is 1.96. If we look up 5% on both sides, it would have been 95% i.e. 1.645, not 1.96 Your answer is correct as you are getting correct pre-calculated values in the background but the methodology is wrong and using your calculations would give different numbers.
02:29 Hypothesis testing is used in statistical analysis to find out facts or conduct surveys. 04:58 Hypothesis testing involves comparing a null hypothesis with an alternative hypothesis. 07:27 Null hypothesis and alternative hypothesis are mathematical opposites. 09:56 The level of significance determines whether the null hypothesis is accepted or rejected. 12:25 Performing hypothesis testing to determine if a sample is drawn from a normal population 14:54 Understanding hypothesis testing in statistics 17:23 The critical value in hypothesis testing is determined based on the level of significance, such as 5%. 19:52 Hypothesis testing involves 5 steps
Bhaiiiii aap ne variance ko SD me convert kiye Bina hi formula me put kiya he n direct book me se jawab laya hei .....samaj ne wale samaj jayenge bt ye comment beginners ke liye tha Mera 🙏🏻
13:45: S.D of the population = UnderRoot(Variance). Since the value 10.24 is the variance, it's underRoot has to be taken and that would be 3.2. Only then the final Z value will be 1.77. Please Take Note!
If level of significance is 5% then u should have to take 95% of level of confidence in one tail test And if u r doing two tail test then u should take alpha take 2.5 % i.e. 0.025 at both end
Variance = 10.24 given means sigma( standard deviation) is square root of variance = 3.2 and this is sample standard deviation, not a population standard deviation, so ee have to find out t- test statistics.
Presentation was very nice But Please correct Point 1. Variance is square of std deviation (std written as variance in demo) . Point 2. 1.96 of bell curve represent 0.95 on either side. Also 5 % is for two tail is equally devided on both side hence should be 2.5 % (except if it is a one tail method is used).
great explanation 👍 Just the z- score of 0.05 confidence is 1.64 So 177> 164 Therefore, Null Hypothesis is not accepted. (I am not that sure just confirming)
No problem it is human to err, you are doing good but only thing i recommend is do your pre video homework diligently, normally little mistakes happen but that must not discourage you. I m statistics teacher myself from Pakistan. Bravo keep it up
Earlier I found the topic difficult.. now it's both confusing and difficult.. Sign of standard derivation is sigma.. variance is represented as sigma^2. Also, when you said that null hypothesis is when H• = 0.05.. then why was it accepted??
He said that we assume it is true that's why he wrote H.=0.05% . So In order to test whether this is true he put the values in the formula and got 1.77 then as he said earlier that the level of significance is 0.05 so he marked it on the graph and found its value from the table which is 1.96 and since 1.77 is not greater than 1.96 and is less than it(can even be equal to it) he accepted the null hypothesis. So this shows that H.=0.05 is true.
One more point I want to add. In the question. 10.24 is the sample variance not population variance. Under such situation t-test is applied not Z-test. Better you consult some standard book of statistics.
in the question solved in the video, variance was given but we need to consider standard deviation in the formula so what is shown was wrong still the answer is correct because he directly wrote the answer without calculating . But the explanation helped me Thank you for that .
Bro, if the p-value is less than the significance level, then the null hypothesis is rejected, not accepted...if it is above the significance level, then the null hypothesis is not rejected. Don't provide misleading information!!!
Hi my name is Diya.Can u plz contact me.muja ekta teacher chaiya statistics ke liye please contact me.My number is 6294865773. Abhi corona k liya koi bhi teacher nahi mil rahi hai.
1.96 is Table Z value which is provided in the question itself. You will calculate the 'Calculated Z value' which is 1.77 here. Now if Calculated Z value is less than Table Z Value, then Null Hypothesis is accepted.
@@vaishalibansal1633 Standard Deviation is used to calculate the Z-value, which is square root of the variance. 10.24 is the variance, not SD. What he has explained in the video is not correct.
Before watching this vedio, I think this topic is really difficult and ununderstandable but sir I was wrong it's also simple. Thanks to you to make this difficult topic easy. I understand every sentence n sentence. I'm happy.
In the question you were given variance which is sigma square and you used it as Standard Deviation(sigma). The value of Z you calculated was 1.77 then you changed it to 1.96
You have explained well❤️ but my teacher did not use this why she has explained us with the help of SST, or with mean square of regression or something like that so can you guide me on the base of these above terms
Join LMT Telegram Community : t.me/lastmomenttuitions
Get All updates of Free courses , Engineering Problem Solved , Study Tips , Placement Preparation and Motivation
Level of significance = 5% hai to dono taraf range 2.5% kar ke chorna hoga tab total LOS=5% hoga and Level of Confidence=95% hoga
Par aapne yeha miss kiya hua hai ye
Z=1.96 tht part is not explained well
You have made a couple of mistakes
1) In the question, variance is given as 10.24. To find the value, you use Standard Deviation, not the variance. So, you should have taken the square root of 10.24, which is 3.2
2) Since level of significance is 5%, it is 2.5% on each side as it is a two-tailed hypothesis
Z value would be: (6.2 - 5.4)/(3.2/sqrt(50)). This is coming as 1.77. As per your method, it would have been only 0.55
Since this is 2 tailed hypothesis, we have to look up the Z value for the probability of 97.5% (not 95%) on the right hand side, which is 1.96. If we look up 5% on both sides, it would have been 95% i.e. 1.645, not 1.96
Your answer is correct as you are getting correct pre-calculated values in the background but the methodology is wrong and using your calculations would give different numbers.
thank you sir
Thank you much I was confused as to how 1.96 is coming and you cleared my doubt
thank u sir
Yes you are right
Thanku sir
02:29 Hypothesis testing is used in statistical analysis to find out facts or conduct surveys.
04:58 Hypothesis testing involves comparing a null hypothesis with an alternative hypothesis.
07:27 Null hypothesis and alternative hypothesis are mathematical opposites.
09:56 The level of significance determines whether the null hypothesis is accepted or rejected.
12:25 Performing hypothesis testing to determine if a sample is drawn from a normal population
14:54 Understanding hypothesis testing in statistics
17:23 The critical value in hypothesis testing is determined based on the level of significance, such as 5%.
19:52 Hypothesis testing involves 5 steps
Level of significance 5 % distributed to the both side i.e. 2.5% on left and 2.5% on right.
If it's a two tailed distribution
@@rishabhsolanki4512 and yes, this problem is two tailed distribution
Bhaiiiii aap ne variance ko SD me convert kiye Bina hi formula me put kiya he n direct book me se jawab laya hei .....samaj ne wale samaj jayenge bt ye comment beginners ke liye tha Mera 🙏🏻
Bhai woh bhi "last moment" par hi padh ke aye the
@@SureshChouksey Right😂
Thank you bro
U saved my life
Yes Right.
Level of Significance : 5% is distributed as 2.5 on each side & level of confidence :95% in graph its not 5% on each side. Please correct it
Right
Exactly. Galat padha dia yaha pr. Channel is good. Needs more content verification.
Bilkul sahi kaha
I will be 1 ka 5%, so it is 0.05, both parts divided 0.5 left side and 0.5 right side.
Bro, this is correct z value at 5% distribution is 1.96
13:45: S.D of the population = UnderRoot(Variance). Since the value 10.24 is the variance, it's underRoot has to be taken and that would be 3.2. Only then the final Z value will be 1.77.
Please Take Note!
🤘👍
Is there anyone who can make assignments on these tests?
Yup bro thanks for advice
I want help
Yes correct, I was also thinking the same
your method of teaching is very good am appricade you
ખૂબ સારી ને સરળતાથી સમજાવ્યું .
નલ અને અલ્ટ્રેટેટીવ બંને વિશે સહજ રીતે સમજ પાડી છે,thanks
No words to say about the way you explained the things, used simple and made it easy to understand. Thank you so much.
Could you please make video on p value?
How to get z value 1.96
Bhai ya ap ko table ma given hota h
ખુબ જ સરસ અને ઉપયોગી માહિતી 🙏🙏
ખુબ ખુબ આભાર સર 🙏
Bro i was having zero knowledge about this topic but i serach for this topic they have more confused me. But you have explained it nicely
Same to you sis☺️
Same
If level of significance is 5% then u should have to take 95% of level of confidence in one tail test
And if u r doing two tail test then u should take alpha take 2.5 % i.e. 0.025 at both end
Yrrr ye meko smj hi nhi aati.
Or bio me bhi statistics pta nhi kha se aa jati h
Starboy world Thank you bro for mentioning it.
@@Poojachoudhary-jv6iy heheh😅
Stats is every where
@@raj9101990 ur welcm bro 😊
Z=1.96 kaise aya
Finally found is topic ka solution !!
Thanks alot!!! For providing practical analysis on such terrible terms! ❤️
z= 0.55
સંશોધન haipothishis testing વિશેની સરસ અને ઊંડાણપૂર્વકની સરળ ભાષા માં ઇન્ફોર્મેશન આપવા બદલ આપનો ખુબ ખુબ આભાર 🙏
Variance = 10.24 given means sigma( standard deviation) is square root of variance = 3.2 and this is sample standard deviation, not a population standard deviation, so ee have to find out
t- test statistics.
Agreed on 1st point.... but when sample variance is given then z test is supposed to be used....
સંશોધન Hypothesis testing વીશે ખુબ ઉડાણપુવૅક માગૅદશૅન પૂરૂં પાડવા બદલ આપનો ખુબ ખુબ આભાર સર
Your example is two tailed test. As your alpha is 0.05 then both side rejection area will be alpha/2 which is 0.025
Yes
@@bhavanasharma629😊l0😊llpl
Presentation was very nice
But Please correct Point 1. Variance is square of std deviation (std written as variance in demo) . Point 2. 1.96 of bell curve represent 0.95 on either side. Also 5 % is for two tail is equally devided on both side hence should be 2.5 % (except if it is a one tail method is used).
great explanation 👍
Just the z- score of 0.05 confidence is 1.64
So 177> 164
Therefore, Null Hypothesis is not accepted.
(I am not that sure just confirming)
Z-score of 0.01 confidence is 1.645......
Video is correct here...
No problem it is human to err, you are doing good but only thing i recommend is do your pre video homework diligently, normally little mistakes happen but that must not discourage you. I m statistics teacher myself from Pakistan. Bravo keep it up
thank u so much for ur advice
Mjhe zra smjh ni ai k 1.96 kesy aya plz ap smjha dein
In that question variance is given,we need standard deviation ,but u took variance directly.
Jagadeesh. He should have mentioned that he is using the standard error of the sample mean while calculating the Z value of the sample.
Root kar k kigiye, ans same hi aayega .
Jazak allah khaira , allah aapko kamyabi dey aur salamat rakhey
Variance ( Sigma ²) = 10.24
Standard deviation ( Sigma) =√10.24 =3.2
5% level of significance that is half in two-tail, .05/2= .025
विषय को बहुत अच्छी तरह से समजाया अलग अलग उदाहरन के साथ मार्गदर्शन दिया। धन्यवाद
Your welcome
Way of teaching is good.Tell ur camera guy DNT change the focus randomly.
Earlier I found the topic difficult.. now it's both confusing and difficult.. Sign of standard derivation is sigma.. variance is represented as sigma^2.
Also, when you said that null hypothesis is when H• = 0.05.. then why was it accepted??
He said that we assume it is true that's why he wrote H.=0.05% . So In order to test whether this is true he put the values in the formula and got 1.77 then as he said earlier that the level of significance is 0.05 so he marked it on the graph and found its value from the table which is 1.96 and since 1.77 is not greater than 1.96 and is less than it(can even be equal to it) he accepted the null hypothesis. So this shows that H.=0.05 is true.
ખૂબ સરસ માહિતી. આભાર સર 🙏
Your voice is so loud and clear, it made the video really awesome
Bro u have got full grip of it
Hats Off For Ur. .Effort
Thanks
Your way of understanding to people is very excellent
V.good information 👍
1 hr before exam : )
I literally watched several videos but this concept is clear to me from your video
Thank's for give Haypothesis testing relatel information sir
Your welcome
નલ અને અલ્ટ્રેટીવ બન્ને વચ્ચે સરળ તફાવત પાડી સમજાવ્યું આભાર સર 🙏
Very splendid explanation.....
You cleared basic terms regarding this topic....
Keep it up.....,,👍
1 saal se mujhe ye kabhi samaj nh aaya but aaj sb ckear ho gya ek hi baar mai thanks a lot for making this video❤🎉
Please upload a viedeo on f-test, z-test and student t-test so that we can fully understand this topic.
ખુબ સરસ માહિતી આપી ધન્યવાદ 😊
The channel name is so accurate XD
Lol, he didn't get it, and gave you heart.
superbbbbbbb .............. after a long time ....mujy smj a hi gya . am frm pakistan .....thnku
GOOD GOING BROTHER..I LOVE U.. U OPENED MY EYES...i was confused but not now..
@9:55 he says null hypothesis will be accepted. You never accept, it is 'Do not reject'. Good video overall!
In two tail curve distribution I think each side critical value should be half of the significance each side. Exallent presented
One more point I want to add. In the question. 10.24 is the sample variance not population variance. Under such situation t-test is applied not Z-test. Better you consult some standard book of statistics.
in the question solved in the video, variance was given but we need to consider standard deviation in the formula so what is shown was wrong still the answer is correct because he directly wrote the answer without calculating . But the explanation helped me Thank you for that .
Thanks sir...very well explaine for null hypothesis and alternate hypothesis test....again thanks...
Your welcome
11:37 please be a bit concerned about auto-focusing problem. Setup your camera manually from the next video onwards please
Camera auto focusing
Excellent presentation!
Awesome video!
Ps. at 10:57, Variance is represented as Sigma square.
but in this care variance is just sigma
Woh bhii last minute hi padhke aye the bro
Sahi bol rahi ho meri jaan
@@suryanshvsingh5496 ooo nalle
@@aakankshagosain4749😆
Harsh, your work is great
Bro, if the p-value is less than the significance level, then the null hypothesis is rejected, not accepted...if it is above the significance level, then the null hypothesis is not rejected. Don't provide misleading information!!!
Correct! Please make one another video and correct it
Hi my name is Diya.Can u plz contact me.muja ekta teacher chaiya statistics ke liye please contact me.My number is 6294865773. Abhi corona k liya koi bhi teacher nahi mil rahi hai.
is it they should only make video if the concepts are cleared they can damage someone's concepts totaly
@@diyaroy9068 You can refer to the channel Statquest. It is really awesome!!
What p value are u talking about bro
Start at 0:38
Thanks, great explanation using real life questions!
Very informative session on hypothesis testing.
How to identify that 1.96 with help of table
Helpfull really
i am again here for 2nd sem
Really a last moment tuition 🤣🤣
Creativity level bro salute LMT
Critical value of 0.05 is NOT 1.96
1.96 is the critical value of 0.025
Yaa even i too didnt get that
Good explanation about hypothesis testing and how to calculate and conclude level of significance .... thank you
From where you get Z value 1.96, while you calculate Z value 1.77 can you explain please. Thank you
1.96 is Table Z value which is provided in the question itself. You will calculate the 'Calculated Z value' which is 1.77 here. Now if Calculated Z value is less than Table Z Value, then Null Hypothesis is accepted.
@@sachialol9278 z=(6.2-5.4)/(underroot(10.24)/underroot(50)) = 1.76
@@ironF5 why underroot10.24, in video he mentioned 10.24/√50 only
@@vaishalibansal1633 Standard Deviation is used to calculate the Z-value, which is square root of the variance. 10.24 is the variance, not SD. What he has explained in the video is not correct.
Excellent explanation regarding null hypothesis....thanks
Your welcome
Yes there are some mistakes in this video, but the explanation is awesome.
And surely it helps in the last moments ;)
Before watching this vedio, I think this topic is really difficult and ununderstandable but sir I was wrong it's also simple. Thanks to you to make this difficult topic easy. I understand every sentence n sentence. I'm happy.
Welcome
I guess you have done mistake with regards to variance and S.D.
Variance = square of (SD).
You have used variance directly instead of SD.
absolutely
Thank you soo much.. it cleared my hypothesis concepts 😊
Explained very well👍
Mujay samjadengy ?
Awesome explanation
Keep watching
Best lecture sir 👌👍...loved it 😍😍
Hello Sir, Could you please give an example of Hypothesis testing using t-distribution ?
I have a doubt regarding critical value?
How can we give value to it as 1.96 ?
I didn't got this point....
usne integration nhi kiya
bas value de diya
It's a Z-score.. we have table for it.. you can also calculate it using the formula for Z-score .
In the question you were given variance which is sigma square and you used it as Standard Deviation(sigma). The value of Z you calculated was 1.77 then you changed it to 1.96
Z=1.77 ye value kese nikli sir plese help me
Yes sir , mera bhi ans nhi aa rha
Thankk u all information
Your welcome
Kindly let me know z value is 1.7 or .57 as i feel 1.7 is incorrect
z = (6.2-5.4)/(underroot(10.24)/underroot(50)) = 1.77
@@ironF5 Why underroot of variance?
Excellent presentation
Thank you
Bhai. Sigma = population std. Deviation hota hai na . Sample Variance = S^2 hota hai na????? 🙄🙄
Han jiii
Important video about Hypothesis Testing.
Thanks bro but plzz upload videos on remaining topics too asap !!
Very good statistics information
U did it wrong man it is two tail so divide 0.05 by 2=0.025
Yes exactly
Yes, he was wrong. It will be 0.025 in both side.
Yes it's two tail
Yes
Applied Mamathematics... Beautiful simple meaning of hyphothesis
Thank You for this great video ☺️
But I've to ask something that how do you put 1.96 from the curve?
at 5% level of significance 1.96 is the value of two tailed test
@@miss_Hima_ OK Thank You ☺️
@@MrAbdullah_Ch bhai mujhe hypothesis testing nhi aati aur ab econometrics bhi nhi aa rhi bhai bata deh hypothesis testing kaise samaj ayega
@@anubhavkumar9189 I've placed a video about hypothesis testing. Check that
@@anubhavkumar9189 th-cam.com/video/ID4vcXVMH8I/w-d-xo.html
You have explained well❤️ but my teacher did not use this why she has explained us with the help of SST, or with mean square of regression or something like that so can you guide me on the base of these above terms
Well explained in a simple way
bilkul bekar video
logic smjhao bhai beginner ko
kya khichdi pka rhe ho
aise bta rhe ho jaise 90% to hamen aata hi h
Bilkul sahi kaha
bro I liked it usne question ke saath explain bhi kiya, maybe its not for absolute beginners!
@@BrokenRecord-i7q I feel variance is wrong calculated is as sigma. it should be sigma square. what do u think.
Well Explained sir..Thank You
Congtaulations for 1 milllion
Good information of hypothesis ...Thank you
Your welcome
Nice information with easy example
Thank you so much sir first time I understood something in statistics
Good explanatory video...Thank you HRDC-GU...
Too Gud explaination. Thanks a lot.
Your welcome vivek
સરસ માર્ગદર્શન આપતો વીડિયો છે
Level of significance will be 2.5% on both side in two tailed test instead of 5% each side and level of confidence will be 95% instead of 90%
Psychology may statistic parh rahi hon ,,ap ny bhot acha samjhya
Useful & nice information
Thanks
સુંદર વ્યાખ્યાન.. આભાર
Very useful information
Thank you