Hey, I find the installation alarming! Why he did not torque to spec those spacers? Usually a 100 ft lbs is needed for the spacer to the body and 80 to 90 ft lbs for the wheels to spacers.
Also my concern the mechanic did not torque it to spec. Anyways, did you try loading around 500-700kg? Will it not affect the loading capacity of the bed? Thanks!
Hi bro, if we don't put spacer will the wheel bolt still able to hold since it's just eating 4-5 thread. Actually what's the purpose of spacer, isit to look good or have acty functional purposes?
Well what actually happen to me was when i but the after market rim it was slightly thick then the stock making the nut not full gripping the bolt (Triton front wheel bolt is short) So I added the front spacer. The bolt from the Triton front wheel tightened to spacer is now sufficient and the spacer bolt tightened to the aftermarket rim with bolt also sufficient. My worry before adding the spacer was the thought of one of my front wheel suddenly come loose when driving. Not that i have settled the issue got peace of mind.
Does the front side only that you install the spacer?how rear side mate?
Yes only the front side
hi , just wonder did you add same size (thickness) spacer to the front and back or they got to be a bit different . thanks
@@leewenlong2008 Behind no spacer just the front (1”) to balance the poke
@@WeekendWarriorX can you share a link for purchursing ?
@@leewenlong2008 shopee.com.my/dhyautoaccessories
Hey, I find the installation alarming! Why he did not torque to spec those spacers? Usually a 100 ft lbs is needed for the spacer to the body and 80 to 90 ft lbs for the wheels to spacers.
Most of the workshops here still practice this, but thank for the info.
Hello sir, I change my rim to R18 260 60 and spacer 38mm, when I do sharp turn, the wheel touch the mudguard, how to solve this?
You got two options, one remove the mudguard or lift the front end by adding 15mm spacer block.
@@WeekendWarriorX tq for info, same problem here.
Can you still load cargo at the back with those spacers?
Never tried putting heavy load before …as I use it as a daily driver home to work and occasionally long distance trips
Hi bro... Installing spacers, is it better to use 30mm or 50mm? My car is all new triton 2021. Thx b4
Standard rim got for 50mm, if aftermarket rim that is already poking out from the side then 30mm.
Tire size sir?
285 60 18
Can solve steering shaking after install front spacer? I got steering shaking after change rim when i drive 100-130km/h
This one no steering shaking at 150km/h
Maybe your spacer does not have hubcentric rings. Always consider buying wheel spacers with hubcentric ring because it is much safer.
Good day po. Safe po ba kahit loaded ng karga yung pick up?
Is it ok not use torque wrench?
So far mine has no issue
@@WeekendWarriorX thank you sir
Also my concern the mechanic did not torque it to spec.
Anyways, did you try loading around 500-700kg? Will it not affect the loading capacity of the bed? Thanks!
@@patrickkk8833 i dont load my bed, i’m one of those guys just love truck over car
Please advise, can i use spacer only for 2 rear wheels? Or does it have to be all 4 wheels? Thank you
No problem but take note on the rear brake hose n sensor wiring
Spacer 1 inci kena aligment lagi untuk hilux
Better do alignment the geometry is different
Nice bro.. what size of tires?
285-60R18
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
What’s the rim size?
Where did you order these spacer?
Shop link: shopee.com.my/dhyautoaccessories
Hello po is it fit also for Montero Gen 2?
Montero Gen 2 looks like our pejero sport here,…looks the same, it should fit.
Hi bro, if we don't put spacer will the wheel bolt still able to hold since it's just eating 4-5 thread. Actually what's the purpose of spacer, isit to look good or have acty functional purposes?
Well what actually happen to me was when i but the after market rim it was slightly thick then the stock making the nut not full gripping the bolt (Triton front wheel bolt is short) So I added the front spacer. The bolt from the Triton front wheel tightened to spacer is now sufficient and the spacer bolt tightened to the aftermarket rim with bolt also sufficient. My worry before adding the spacer was the thought of one of my front wheel suddenly come loose when driving. Not that i have settled the issue got peace of mind.
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Hye bro...kedai kt mana ya buat diff drop kit
Off Road Equipment ( ORE 4WD Center) [ore.com.my]
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Harga plesernya brapa bang...
Rm200
200 ribu bang...
hello sir nag lift paba dito or hindi na
Sorry I don’t understand?
Hi, a stock height with stock size tyre (260-60-18) n stock rim should be ok to add 35mm spacer. If you go 285-60-18 then it will rub
bang depan spacer brapa paling nipis, mmg ni paling nipis ke? 25mm kan
Yes 25mm minimum, any thinner you have to grind wheel bolts
@@WeekendWarriorX okok.. so ni pun dah cukup la.. kene pakai lock tite
nk tnya ok kh guna ni brng blh laju ke bos
@@syahchannel5261 no problem when going fast, no shaking on steering wheel. Make sure you buy with centric hub.
Minta kontak nya bro
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.