Agree that this is a great video. Thanks for taking the time to make this and post it. I'm about to do the same job on my 2011 Lexus ct200h and the tool list was very helpful.
Hello I have serious doubts if a prius plus ZVW40 with ENGINE CODE: 2ZR_FXE 2015. If I can do the brake fluid change myself or you have to do it by diagnostic machine. Above all my main doubt is whether for this change you have to purge the race simulator or only have to be done when changing for example the ABS, the Brake Reinforcer or some of the lines. Thanks and regards
Hello this greate video and very understandable explain, thank you very much, If you can help me I have DTC c1391(Abnormal Leak in Accumulator) what is broken, Vaccum Pump or Master Cylinder Assembly or both parts need replace? and what about firmware, you stitched your Brake Actuator?
Hello. I have replaced my ABS today at car service. For replacement they used used ABS. It is 2011 Lexus CT200h. But during cornering ABS start work and slow down the car. Could you please help me? What should be done to fix this problem? I think it needs some kind of calibration.
Is there any abs lights on? Dash lights? Tbh it's very hard to diagnose a car without seeing it. Also it's hard when it was a used part as well. From my experience used parts especially abs actuators on toyotas don't take the relearns very well.
Hello, I have a CT 2012 with 150k miles I just heard a noise when braking 5 to 20mph , sounds like a bicycle with a baseball card on the spokes. Can somebody confirm this is the noise it makes when you need a new brake actuator ?? Thanks in advance
Off the top of my head I dont know. I've never worked on one but I can imagine bleeding procedure and labor will be very similar. Most of these cars are pretty similar.
@@DI_Wy thank you. My local toyota dealership quoted me $3500 for parts and labor. After watching this, it looks like it is a lot of work but not $3500 worth. I could get a new engine for that price.
Haven’t seen it much in cts however it’s a pretty common issue with Prius. I mean it’s a little over 10 years old and you use it every single time you drive.
wish I saw your video before going to the dealer.
Great video , two things, please don’t pry off the electric clips , squeeze them with needle nose and water is best to wash away brake fluid.
Agree that this is a great video. Thanks for taking the time to make this and post it. I'm about to do the same job on my 2011 Lexus ct200h and the tool list was very helpful.
This video helped a lot. A lot less intimidating than it looks.
Great video! Simple and straightforward. Thank you for sharing! Cheers 🍻
Hi . What was issue? Why did you replace? Also did you replaced pump?
The actuator leaks internally and won’t hold pressure from the pump . Throw a code like c1931 .
Good time of the day. Where did you purchase replacement? Is it new, used or rebuild?
Excellent video.
Appreciate it! :)
Hello I have serious doubts if a prius plus ZVW40 with ENGINE CODE: 2ZR_FXE 2015. If I can do the brake fluid change myself or you have to do it by diagnostic machine. Above all my main doubt is whether for this change you have to purge the race simulator or only have to be done when changing for example the ABS, the Brake Reinforcer or some of the lines. Thanks and regards
can you bleed the brakes normally or is the scan tool required?
Hello this greate video and very understandable explain, thank you very much, If you can help me I have DTC c1391(Abnormal Leak in Accumulator) what is broken, Vaccum Pump or Master Cylinder Assembly or both parts need replace? and what about firmware, you stitched your Brake Actuator?
Hey where you able to find out what the issue was?
@@joshuapedraza8007 I bought scanner Topdon ,Autel or Launch and when you will buy, you necessary to check what is function the scanner has
Should Lexus charge $2,000 for this procedure? Thanks.
Hello. I have replaced my ABS today at car service. For replacement they used used ABS. It is 2011 Lexus CT200h. But during cornering ABS start work and slow down the car. Could you please help me? What should be done to fix this problem? I think it needs some kind of calibration.
Is there any abs lights on? Dash lights?
Tbh it's very hard to diagnose a car without seeing it. Also it's hard when it was a used part as well. From my experience used parts especially abs actuators on toyotas don't take the relearns very well.
@@DI_Wy hi, How can you tell if the actuator needs replacement
Hello Aslan Bey, i have a same problem. Did you solve?
Hello, I have a CT 2012 with 150k miles I just heard a noise when braking 5 to 20mph , sounds like a bicycle with a baseball card on the spokes. Can somebody confirm this is the noise it makes when you need a new brake actuator ?? Thanks in advance
@chazrivera1705 did you find the issue? i have the same problem..
Do you know what Prius part number is compatible for 2011 Ct200h non-sport?
That I am not to sure sorry. If you find out lmk!
@@DI_Wy what was the part number that you used?
Hi, do you know if is the same for a 2010-2012 Lexus hs250 ?
Off the top of my head I dont know. I've never worked on one but I can imagine bleeding procedure and labor will be very similar. Most of these cars are pretty similar.
you change the same part number or not?
Tbh I’m not sure. Sorry I just video tape my jobs. I don’t order parts etc.
Do you have an estimate on what the part costs and what a service shop would charge to replace?
I don’t sorry.
@@DI_Wy how long did it take you to do this job?
@@runningsharky1159 idk tbh couple hours
@@DI_Wy thank you. My local toyota dealership quoted me $3500 for parts and labor. After watching this, it looks like it is a lot of work but not $3500 worth. I could get a new engine for that price.
The ct I’m doing now the part list for 770 from Lexus
The video made it easy
How common is this issue? This part is almost 6000$CAD new from the dealer so if this is common thats crazy
Haven’t seen it much in cts however it’s a pretty common issue with Prius. I mean it’s a little over 10 years old and you use it every single time you drive.