Yes! That one is a nice jet actually. Flys nice. Lands nice, the only thing i dont care about is the tail surfaces glue on, so have to make sure those servos work before gluing.
Well i got mine on Thursday after having it on pre order since release. VERY disappointed! Rudders don't line up and screws will not take bite and following instructions to the letter. Screw channels filled with glue. Dents and dings EVERY where. You can see through the decals. And the EC5 battery cable is WAY to short to make easy to use. No lights and poor fit and finish. Stopped the assembly with the rudder fiasco and packed the crap back up. Sent detailed email to FMS C.S. with videos and pics of all the issues! FMS really dropped the ball with mine i am very surprised by this.Glad yours looks defect free mine looks like it was dropped off a bus.
Sorry to hear that. I can relate because not every model I've gotten over my 30 years in the hobby and 18 years of flying fms has been 100%perfect. It is unfortunate. I don't do assembly videos for that reason, ide hate to get into an assembly video and have to scrap it. But I do defenately let fms know when there are issues. The only thing on mine was where the front portion of the rudders go on, I had to take a small hex driver stick through into the threaded area kind of pry inward and then they poped on. The rudder surface to rudder didn't sign up 100% but not off by much I just signed them up even at the top, but wasn't off enough at the bottom to mention. Thank you for watching my video, and I hope fms makes good on yours.
@@starsandstripesrc8475 Thanks for the reply. Yes same with me as far as years doing it. And I agree that not all is going to be 100%, however there is a certain level of acceptance that must be answered. This plane more than crossed what is acceptable as defects and misses. FMS will make it right , Same thing happened with my first Avanti S 90. It had a bad board and the gear and flaps did not work properly. FMS refunded me or offered a new plane. I choose a new plane and am so glad I did. thanks for you contribution to the hobby and keep em in the air!!!
@FatGuyFliesRC hey bud no problem, yeah I saw your reviews of the Avanti at the time, another unfortunate affair, but good they took care of it. I really am liking the 2 90mm's. And thanks for your contributions as well good flying a nd happy holidays.
@@starsandstripesrc8475 update i got my fms super scorpion 90mm v2 all fixed up and working correctly. I have apologized to FMS and cancelled my return request!
YesYesYes looking forward for the maiden!! 🥕🥕
Thanks for commenting, and for watching! I hope to get the maiden soon. Been pretty cold here in NM, so waiting for some warm we r temps 😅
@starsandstripesrc8475
Ok 👍 I'm flying in cold 🥶 weather with my fms avanti (0°) we need warm sticks for our thumbs
Wow 0° ide never do that lol, 37 is too cold for me.
Fly lower so you get it warm 😂@starsandstripesrc8475
I keep looking at the F-15 Oregon National Guard.
Yes! That one is a nice jet actually. Flys nice. Lands nice, the only thing i dont care about is the tail surfaces glue on, so have to make sure those servos work before gluing.
Well i got mine on Thursday after having it on pre order since release. VERY disappointed! Rudders don't line up and screws will not take bite and following instructions to the letter. Screw channels filled with glue. Dents and dings EVERY where. You can see through the decals. And the EC5 battery cable is WAY to short to make easy to use. No lights and poor fit and finish. Stopped the assembly with the rudder fiasco and packed the crap back up. Sent detailed email to FMS C.S. with videos and pics of all the issues! FMS really dropped the ball with mine i am very surprised by this.Glad yours looks defect free mine looks like it was dropped off a bus.
Sorry to hear that. I can relate because not every model I've gotten over my 30 years in the hobby and 18 years of flying fms has been 100%perfect. It is unfortunate. I don't do assembly videos for that reason, ide hate to get into an assembly video and have to scrap it. But I do defenately let fms know when there are issues. The only thing on mine was where the front portion of the rudders go on, I had to take a small hex driver stick through into the threaded area kind of pry inward and then they poped on. The rudder surface to rudder didn't sign up 100% but not off by much I just signed them up even at the top, but wasn't off enough at the bottom to mention. Thank you for watching my video, and I hope fms makes good on yours.
@@starsandstripesrc8475 Thanks for the reply. Yes same with me as far as years doing it. And I agree that not all is going to be 100%, however there is a certain level of acceptance that must be answered. This plane more than crossed what is acceptable as defects and misses. FMS will make it right , Same thing happened with my first Avanti S 90. It had a bad board and the gear and flaps did not work properly. FMS refunded me or offered a new plane. I choose a new plane and am so glad I did. thanks for you contribution to the hobby and keep em in the air!!!
@FatGuyFliesRC hey bud no problem, yeah I saw your reviews of the Avanti at the time, another unfortunate affair, but good they took care of it. I really am liking the 2 90mm's. And thanks for your contributions as well good flying a nd happy holidays.
@@starsandstripesrc8475 update i got my fms super scorpion 90mm v2 all fixed up and working correctly. I have apologized to FMS and cancelled my return request!
update i got my fms super scorpion 90mm v2 all fixed up and working correctly. I have apologized to FMS and cancelled my return request!
That's good, glad to hear that.
88 = RADIUM; Melting point 973 K (700 °C, 1292 °F)
Haha thanks, I was wondering where they came up with the 88
They says 8s can do max speed 240 km/h
@sergiub4013 that's what they say. I got my vamo version in Saturday, have a 8s pro system that will go in it. Maiden hopefully this weekend.