Thank u! I fixed my acer backlight problem. It was a loose connection indeed. I didnt want to remove the rubber so i tried nudging the wire from below and it worked! Thank u so much for sharing your knowledge so generously!
I learned (from a cooling expert) that a fans primary purpose is to create a difference in air pressure between outside the casing and inside which then creates the airflow needed. Perhaps this is a good illustration of that. It was explained that this also means that adding more holes or removing covers etc. does not necessarily make for better cooling as it upsets the designed balance of air pressure.
I think this video is good because its one of those ones that can catch a new person out, although I imagine there are probaly videos already uploaded with this problem. Its the first time I've seen this problem on any of the repair channels.
Easy or not , we learn something and that is one reason to watch your videos. Other reasons are your personality and you just are a good person and family man. Blessings Leo
Thanks for this video. Looking to buy a similar laptop which is for sale, with this fault, to learn about fixing. Boring? Yes. Easy fix? Yes. Perfect for me.
That's fun. The other day i had a look at my mother's laptop.....Aspire 3 with screen problem 😁 i suspect the screen connector on the screen is not connecting properly. The screen was easy to get out and wasn't clued, it had 4 screws. If i press on the lower part of the screen bezel, the screen flickers and/or comes back to normal. Maybe it's just a feature..... Thanks to Zorin i had no problem to take it apart 👍🤗
I have the same model with same problem and the same solution fixed it - it was dropped , and the screen connector on the motherboard side was unplugged.
Good evening. Dear Sorin let me disagree with you.This video is very interesting, since it provides a clear giagnosis path to the solution. Morover, there are your valuable suggestions how to remove the screen rubber-like stickers. All my respects. Cheer s from Italy.
Hi Sorin, good job. What about the repair cost to customer? If you just said it was the loose connection, most of the time customer denied to pay for the time you spent.
Would this issue also cause flickering as if the screen is broken? I have never dropped mine but the screen is flickering too bad to see what is on it.
"the customer said it was a top end gaming laptop" You explained in an earlier video you charge more for expensive gaming laptops, should have told him that and see his reaction hahaha.
Dear Sorin's I have A problem in Backlight Of Lenovo G50-80 All things are good ( there is picturs , thers is 19v in connector .......I take screen inn other motherbord it's OK it's work good )) but wwhen i put it in the main motherbbord don't work still have Backlight issus....I tested all Things are fine but still haven't backlight .pleaase can you help me where is the problem dear.
hi, from mainboard next to lcd connector you will see an ic which provide BL EN (BackLight ENable) signal who send the information to screen to activate BL from 19V supplies by mainboard, for ASUS the ic is ANX1121
About the WiFi I've got one once, that the WiFi was soldered to the board, and was a really expensive Samsung laptop, no way I've would tangle with that, got the client's a nice USB WiFi hahahahaha
I see you suffer with the electric screwdriver, throw it away and get normal screwdriver or with a button. It should by a joy to use a tool, not a pain + you you'll save yourself a wrist, that motion doesn't look very ergonomic.
Sorin, I miss the good old days, when you uploaded a video every day.
I will try :P
@@electronicsrepairschool Thank you Sorin!
He’s makin millions on helium mining now lol. Check it out.
The joy that comes when a new vedio is uploaded. Something new to learn and the fun of watching.
Thank you Sorin for continuing to upload repair videos , I have learned a lot from you , you are a true teacher
Sorin, DON'T apologize, we learn on EVERY video! ;)
Thank you for this "easy repair", glad you did upload it. It still taught a lot for us novices
Thank u! I fixed my acer backlight problem. It was a loose connection indeed. I didnt want to remove the rubber so i tried nudging the wire from below and it worked! Thank u so much for sharing your knowledge so generously!
Putting the model number on the title is one of the best thing you do in your videos📼 Sorin👌.
not many other people's repair videos doesn't have..
Dear Sorin... there is ALWAYS something important to learn from you and your videos!! Thanks a lot!!
Nothing to learn? Sorin, there's always something to learn from you mate.
I learned (from a cooling expert) that a fans primary purpose is to create a difference in air pressure between outside the casing and inside which then creates the airflow needed. Perhaps this is a good illustration of that. It was explained that this also means that adding more holes or removing covers etc. does not necessarily make for better cooling as it upsets the designed balance of air pressure.
I think this video is good because its one of those ones that can catch a new person out, although I imagine there are probaly videos already uploaded with this problem. Its the first time I've seen this problem on any of the repair channels.
Never boring Sorin 😊
Didn't realize that some screens were taped on the back so good upload. Thank You...
Easy or not , we learn something and that is one reason to watch your videos. Other reasons are your personality and you just are a good person and family man. Blessings Leo
Even if the job was easy we still learn here
Please keep uploading every video
These videos are little gems. Thank you.
Your videos are never boring ! 👍🏻🤝🏻🇳🇱
It’s always learning Sorin.
WoW, 3 videos in the same day.
Thanks for this video. Looking to buy a similar laptop which is for sale, with this fault, to learn about fixing. Boring? Yes. Easy fix? Yes. Perfect for me.
Sorin, you did a good yob, go on with your lectures, they are appriciated
That's fun. The other day i had a look at my mother's laptop.....Aspire 3 with screen problem 😁 i suspect the screen connector on the screen is not connecting properly. The screen was easy to get out and wasn't clued, it had 4 screws.
If i press on the lower part of the screen bezel, the screen flickers and/or comes back to normal. Maybe it's just a feature.....
Thanks to Zorin i had no problem to take it apart 👍🤗
I hate that manufacturers are using adhesive where its not necessary. There's no reason the screen can't be screwed down. Great video as always
I think its very helpfull. Its the thinking and the way to the fault. Also the releasing of the screen is not that easy.
Well done Sorin! 🔥
Thank.s sir you make an electronique repair a easy think il love this
You forgot about your lesson where we have to unplug the battery before messing with display conector, especially when we don't plug it straight 😁
Thank you, may be boring to some. But was helpful to others :)
still thank you for uploading!
Not boring at all!
Yes easy fix, but still love the video. Keep uploading!
Thanks alot Sorin
Я задержал дыхание когда он подключал шлейф матрицы при подключеной батарее😮
Really, really helfull, thank you for the video)
I have the same model with same problem and the same solution fixed it - it was dropped , and the screen connector on the motherboard side was unplugged.
That was too easy for you, upload another one 👍
That one is surely a Lucky Job 😃
ACER engineers have been watching too many iPhone battery replacement videos. 🤣
The screen tape is available from Aliexpress, I just bought 50 strips for £30
The heatsinkless fan is an Apple trademark.
good job mate.
Thank you, master!
Hello Mr sorin
best teacher
Thank you
Just stick some hotglue on the screen.... Done ! 😇
Good repairing job sir, but i seen something wrong with video title
Good evening. Dear Sorin let me disagree with you.This video is very interesting, since it provides a clear giagnosis path to the solution. Morover, there are your valuable suggestions how to remove the screen rubber-like stickers. All my respects. Cheer s from Italy.
Sorin, cum faci de nimerești treburile ușoare :)
Mulțumesc pentru video!
Hi Sorin, good job. What about the repair cost to customer? If you just said it was the loose connection, most of the time customer denied to pay for the time you spent.
was good to know thanks
Would this issue also cause flickering as if the screen is broken? I have never dropped mine but the screen is flickering too bad to see what is on it.
Great video. I have a question. How the half connection of the screen can couse a 8V instead of 19 at the mobo connector?
it is volage from battery
@@quanhoang2091 just 8V?
Worked
did you replace the sticky stuff off cam? or just left it be?
Not even a couple of blobs of hot glue to stop the screen moving, it's your number one fix lol :-D
Just a joke sorin 😀
Easy .... well .... take 'em when you can 😁 another happy customer right?
stick the screen with bubblegum or hot glue. The sticker is straight and better than factory😄
No hot glue? What kind of repair is this without got glue? :)) Thanks
"the customer said it was a top end gaming laptop" You explained in an earlier video you charge more for expensive gaming laptops, should have told him that and see his reaction hahaha.
Dear Sorin's I have A problem in Backlight Of Lenovo G50-80 All things are good ( there is picturs , thers is 19v in connector .......I take screen inn other motherbord it's OK it's work good )) but wwhen i put it in the main motherbbord don't work still have Backlight issus....I tested all Things are fine but still haven't backlight .pleaase can you help me where is the problem dear.
hi, from mainboard next to lcd connector you will see an ic which provide BL EN (BackLight ENable) signal who send the information to screen to activate BL from 19V supplies by mainboard, for ASUS the ic is ANX1121
👍👍👍
Great
About the WiFi I've got one once, that the WiFi was soldered to the board, and was a really expensive Samsung laptop, no way I've would tangle with that, got the client's a nice USB WiFi hahahahaha
"Asus Aspire" so it's MIX betwen ASUS and ACER :)
Cool...
I still like your videos but its ACER not ASUS :)
Ce ce ce?? Dumneavoastra vorbesti in limba romana?) Salut din Transnistria!
Hello...can any body help me with the adress of the shop from Sorin?..i will visit the shop.....help....thank you.
tricky one :D
Thard
Lol i like how u said ez like u kill someone on a roblox game
I THINK THE LAPTOP HAS A TAPE WORM ...
Easy or not a repair is a repair ! bye
I see you suffer with the electric screwdriver, throw it away and get normal screwdriver or with a button.
It should by a joy to use a tool, not a pain + you you'll save yourself a wrist, that motion doesn't look very ergonomic.
conteaza ca ei nu stiu ce vb tu an alta limba
Second
Acer, one of the worst laptop brands