FrSky Stabilized Receiver Mounting Type Orientation Horizontal / Vertical and "Reversed"

[@dean6344]

Thank you for your great videos! Question: I have (2) receivers (a Archer Plus R6 and an Archer SR10 Plus). I need 12 channels for my model and I would like to have the +R6 also function as a redundant receiver. I have a TD X20 R Transmitter. Is there a way I can do this?

[@bamauricio]

What if you need to install the receiver horizontally but antennas pointing to the back?

[@frskyben]

@bamauricio you can do that with regular horizontal mounting type setting you just need to configure the gyro response directions accordingly

[@dean6344]

@@frskyben I thought that the pins had to "point" to the rear of the model..and the antennas toward the front.

[@frskyben]

@dean6344 that's only REQUIRED if you are using the knife edge or hover modes. If not using those modes you can install it rotated but you just need to set the gyro correction directions accordingly

[@acrodow0384]

@@frskyben not having success with this. I need the SXR10+ antenna towards back of model away from carbon wing tube. if I correct / reverse in group-1 gyro config for proper response. in manual mode (not stabilized) output for Ail & Elev are reversed. If I correct Outputs, gyro for Elev& Ail are reversed. What am I doing wrong?

Thank you. At some point will the stabilization functions be integrated into Ethos so we don’t need a Lua script? I have zero desire to use Lua scripts.