Jeti - a DLG launch and zoom flight modes button

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ต.ค. 2024

ความคิดเห็น • 6

  • @rhymair5228
    @rhymair5228 5 หลายเดือนก่อน

    Thanks a lot, very helpful!

  • @RcBarnstormer
    @RcBarnstormer 2 ปีที่แล้ว

    Thanks so much Harry. Out of town for a couple days but looking forward to getting to my transmitter.

  • @RcBarnstormer
    @RcBarnstormer 2 ปีที่แล้ว

    I think this one is right in front of me but the lights must be off. I assign the sequencers to both ailerons to adjust camber for zoom. However I never get aileron control back.??

    • @cotswoldpilot
      @cotswoldpilot  2 ปีที่แล้ว

      No no no!!!!! The whole point of this is to change the Flight Mode, so that you can set things per mode. In Flight Mode Trim you change ailerons from G to S and set a trim value for each mode

    • @RcBarnstormer
      @RcBarnstormer 2 ปีที่แล้ว

      There’s the light switch. Harry, awesome awesome. Thanks so much. Cheers from Oregon. By the way I was at a very nice field in Phoenix the other day. All Jeti guys knew who you were. Very appreciative. Thank you.

    • @robinrepitsch1382
      @robinrepitsch1382 2 ปีที่แล้ว +2

      There is a better way to handle this problem. Sometimes, your lauch is shorter than 3s. You may have other wind conditions etc...ore longer than 3s. On the top of your lauch point, you use the aileron to bring your glider back to horizontal.. User a logic switch, A on, B off, A is your button and B is your aileron stick +/-~15%. Now you can switch off Zoom by pushing the aileron stick . And you are not hocked to the 3s 😉