108.10 In the description I linked this website. apxp.enif.uberspace.de/airport/RJTT/ In the top right if you put in the ICAO code which you can find from the MSFS2020 Map you can find out if the airport you want to land at has ILS. In this case you can see on that page the LOC/ILS and the freq next to that. That is what you will be looking for with a different airport. There is other ways to get it, but that is just one way!
Thanks for posting this video, but I have tried copying this procedure/route multiple times and the LOC seems to consistently point me about 50 ft to 75 ft to right of the runway. What am I missing? Plus the computer automatically changes the frequency I had set mid-flight, so when I'm setting up for approach, I have to correct it to be 108.10 again. I set up my FPL using MSFS to arrive at a route that is identical to yours. Any advice would be appreciated.
I like mfs2020 but who's the geek lurking in front of aircraft on his tow devise...weirdo. And who gave the ok on giant arrows for ground taxi routes? Just a little overkill...great lesson
Thank you for this!!! Question I noticed this aircraft is extremely sensitive when I take off autopilot before landing and use the joystick - starts bouncing all around on me - should I be using rudder pedals and trim instead to get down and just use stick to flare up when landing on runway? Thanks so much!
When you go to the Controls tab in the Options page, you'll see your various inputs plugged in like such. Click on your “Controller” input, and on the left hand side you'll see a blue (or white, if selected) box called Sensitivity.
Thank you !! And one more if u don’t mind - if I left approach button on all the way to runway would it get me there? Seems like it starts dropping altitude fast and I feel I will end up short - assume in real world nobody lands on autopilot- thanks!!
great video. My only problem with this aircraft is that the autopilot randomly stops working for no apparent reason when I am in NAV mode. It will be happily following the route then the plane will occasionally drift off the flight path and eventually end up in a steep bank/dive. It does this in about 1 in 3 flights I take. I think the autopilot in this sim has some issues that need ironing out. Does it do that for you sometimes?
This was a very informative video, thank you very much. I'm very new to flying sims, but I did the same loop and managed an ILS landing. Never would have made it without this video. I was confused though, where did you get that 108.10 frequency? I can't find any reference to it anywhere. Again, thanks!
Much appreciated! Sources: My latest video may help when it uploads soon! th-cam.com/video/p6-vhVrbMHw/w-d-xo.html Search RJTT on these two websites! apxp.enif.uberspace.de/ airnav.com/airports/ Or simply look in the description of the video.
Hello, thanks for the instrument flight video, how do you get the G1000 to have larger buttons than in the simulator, many times it is impossible for me to visualize the autopilot commands, regards
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Brilliant. I’ve learned more by watching this one video than maybe 50 other videos combined. Thank you sir.
Thank you. I appreciate all the work you've done on your tutorials.
very nice, especially the landing. THANKS for this nice video
How do you know what number the nav needs to be?
108.10 In the description I linked this website. apxp.enif.uberspace.de/airport/RJTT/ In the top right if you put in the ICAO code which you can find from the MSFS2020 Map you can find out if the airport you want to land at has ILS. In this case you can see on that page the LOC/ILS and the freq next to that. That is what you will be looking for with a different airport. There is other ways to get it, but that is just one way!
CYTZ - Billy Bishop Toronto City Centre Airport RW 08 has an ILS of 110.15 as an example!
@@azayomi Thank you, amazing tutorial :)
another great video i am not a study level simmer that is close enough to realism for me.
Thanks for posting this video, but I have tried copying this procedure/route multiple times and the LOC seems to consistently point me about 50 ft to 75 ft to right of the runway. What am I missing? Plus the computer automatically changes the frequency I had set mid-flight, so when I'm setting up for approach, I have to correct it to be 108.10 again. I set up my FPL using MSFS to arrive at a route that is identical to yours. Any advice would be appreciated.
Great Vid again....appreciate the informative Tutorials
Great video mate, so much easier than some out there. Looking forward to more.
I like mfs2020 but who's the geek lurking in front of aircraft on his tow devise...weirdo. And who gave the ok on giant arrows for ground taxi routes? Just a little overkill...great lesson
How did you know what frequency to set NAV1 and NAV2?
Great Video. Thanks.
Is there a weather radar?
Thank you for this!!! Question I noticed this aircraft is extremely sensitive when I take off autopilot before landing and use the joystick - starts bouncing all around on me - should I be using rudder pedals and trim instead to get down and just use stick to flare up when landing on runway? Thanks so much!
When you go to the Controls tab in the Options page, you'll see your various inputs plugged in like such. Click on your “Controller” input, and on the left hand side you'll see a blue (or white, if selected) box called Sensitivity.
Thank you !! And one more if u don’t mind - if I left approach button on all the way to runway would it get me there? Seems like it starts dropping altitude fast and I feel I will end up short - assume in real world nobody lands on autopilot- thanks!!
thanks for that :) u are awesome! ;>
great video. My only problem with this aircraft is that the autopilot randomly stops working for no apparent reason when I am in NAV mode. It will be happily following the route then the plane will occasionally drift off the flight path and eventually end up in a steep bank/dive. It does this in about 1 in 3 flights I take. I think the autopilot in this sim has some issues that need ironing out. Does it do that for you sometimes?
This always happens to me, too. Thought I was the only one.
This was a very informative video, thank you very much. I'm very new to flying sims, but I did the same loop and managed an ILS landing. Never would have made it without this video. I was confused though, where did you get that 108.10 frequency? I can't find any reference to it anywhere. Again, thanks!
Much appreciated!
Sources:
My latest video may help when it uploads soon!
th-cam.com/video/p6-vhVrbMHw/w-d-xo.html
Search RJTT on these two websites!
apxp.enif.uberspace.de/
airnav.com/airports/
Or simply look in the description of the video.
@@azayomi thank you thank you thank you
Hello, thanks for the instrument flight video, how do you get the G1000 to have larger buttons than in the simulator, many times it is impossible for me to visualize the autopilot commands, regards
Bro, can u tell me how do u know when to turn on approach and loc1?. And what altitude u wanna be in when turning on approach and loc1? Plz
@MaxedOut Thx bro. I subed
can u made a movie how to set flight plan in that plane?
I hope this is helpful! Flight Plan - RJTK - RJTT imgur.com/a/X1Di1K6
3 is not free and throttle is not frottle, but otherwise good video.
Do all ils’shave dme?