Cura settings for Creality Ender 3 V2
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Cura settings for Creality Ender 3 V2
Hello Everyone! Here is my Cura settings video for creality ender 3 version 2. I showed how to set up the printer in Cura itself and how to use slicing settings for the best quality prints. Of course, there is always a trade-off between time it takes to print vs high resolution. I suggested my personal parameter ranges so that you can use them as well. Let me know what you think in the comments down below. I hope this video helps you guys.
Here is the link for downloading the latest version of Cura software: ultimaker.com/...
Last but not least, DONT FORGET TO SUBSCRIBE :D
#ender3v2 #crealityender3V2 #curasettings
If you guys like this video and this video helped you for your printer, help me grow my channel by subscribing :D :D And please share this video and tell you friends too maybe they also wanna subscribe too! Thank you all! Let me know how can I improve my videos in the future. Feel free to comment down below!
can I get a link to print the t-rex skull that's at the beginning of the video, please?
Also, great video very helpful and in-depth, good job 👍
@@antsandpets here it is: www.thingiverse.com/thing:308335
@@antsandpets thank you!
@@3DPDoctor thanks :)
The settings:
X(Width) = 220mm, Y(Depth) = 220mm, rest stays the same.
thanx so much dude! i just got my ender 3 v2 for my bday cuz my friend got the same one a few weeks earlier and i wasnt sure what setting to put ender 3 or ender 3 pro in cura! thank you!!!!!!
Happy to help and happy birthday
18 Hours for that pen holder? These settings are not optimal in any case.
Well it is for great resolution. Not for time. If you want to go faster make it 0.2 or even more. I like smooth prints
@@3DPDoctor you can also go fast with 0.1 it just have to be optimized to the model..
@@ArtPomelo do you know how? I am not sure if I understand you correctly
@@ArtPomelo what setting would allow that? Can you link your profile
@@epx_g4279 Like with every preset it wont work with everything but for that simple pen box these settings are way too much.. Basics like e step config and so..with that you can go higher with print speed or layer height without losing much quality. No idea why this low detailed pen holder needs 0.1.. I just got a new printer and work on new settings.
Selam Dogan, yakin zamanda aldim bu printerdan. Kendi ayarlarimin saglamasini yapmak icin videolara bakiyordum ki dedim bu ses tanidik geliyor :) Senin ayar profilini de kaydettim. Bir DoE yapip parametrelerin etkilerine bakacagim yakin zamanda.
Bol sans 😃
dolandırılmış gibi hissettim kendimi
Lol, yeterince arastirma yapmamissin. Some things are pretty obvious.
Merhaba, ayaları hala kullanıyor musunuz yoksa değiştirdiniz mi ayarları?
am i the only one who noticed 3d printing doctors intro music is one of the naruto themes?
Hahahaha yeap. 😁🤙🏻
hi @3D Printing Doctor just want to say it was very very helpful thank you so much for the great video and thanks again
İngilizce aksanından türk olduğunu anladım. Teşekkürler video için.
You are welcome.
Can you export your settings?
Unfortunately not, if I do people doesn’t watch the video.....
Sggdhddhjd what is about being greedy. Why so lazy to put some numbers in guys? Seriously?
@@3DPDoctor You upload 10 videos a year and have 3.9k subs. Why being a dick and act like if you made serious money from people watching instead of trying to be nice to people that watch your mediocre videos lmao
I'm wondering if the guys complaining shared these settings after 3 months...? talking about greedy people ....
@@fns58 rude, why cant you all just be nice, its not that hard to just watch the video
I'm a bit confused I put the same model in prusa and it says it takes 2 hours to print but in cura it says it takes 7 hours????? I'm new in 3d printing
Check your layer height, infill% and print speed. They make the difference in print time
Newbi here. so im not sure if I need to connect my printer to my PC or should I just move the files to the SD card and then print it
please help someone. know this might seem like a stupid question but im new
Put files into Sd card and print from sd
@@3DPDoctor thank you soo much brother
Allah c.c. razı olsun. Çok işime yarayacak
Thanks
Merhaba, hala bu ayarları mı kullanıyorsunuz aynı modelde yoksa değiştirdiniz mi ayarları?
Merhaba, ender 3 v2 yazıcımdan baskı aldığım zaman modelin etrafında gözle görülür çizgiler oluyor. Fotoğrafını bir yerden atsam yorumlayabilir misin lütfen? Teşekkür ederim.
Instagram @3dprintingdoctor
@@3DPDoctor mesaj attım, teşekkür ederim.
I will take a look
sorunu çözdünüz mü? Yardımcı olursanız çok sevinirim
@@bzkenway evet çözdüm, z rod kasılıyormuş
Hi I just bought Ender 3 V2 printer and on my first print while transfaring my STL file to the SD card I got error and then it forced me to format the SC card
can some one tell me if I have lost anything important or not?? I wasn't even able to open the card to see the files in it
Hey Doc, nice video! Would you use same settings on Ender 5 Plus and CR10S Pro ?
More or less. But it depends on your print results. You might need to adjust them 😃
@@3DPDoctor Many thanks :)
People are still using form2 like me 😂
Form 2 is great. I am still using it too
TH-cam da gezinirken hasbelkader sana rastladım. Konuşma aksanında ya hu Türk galiba dedim ve öyleymişsin. Bir sevindim ki inananmam. Çünkü 3d yazıcıdan silikon basan gördüğüm tek kişi sensin. Bana bu konuda yardımcı olmanı rica ediyorum. 3d yazıcı alarak silikon kalıplar basmak istiyorum. Lütfen bana yola göster. Ne alayım, filamentinden makinesine kadar yardımına muhtacım. Teşekkür ederim.
Selam, guzel denk gelmis. Evet dogru. Konu ile ilgili sirket kurdum. Simdi amerikanin ilk 3d desktop silikon printer satisina baslicaz. Yani anlayacagin bu makineyi satiyor olcagim. Yakinda videolarini yayinlicam. Patent de almak uzereyiz :D sana yardimci olabilir miyim guzel bir soru cunku benim makineni satin almani isterim sana kendin yapmani saglayamam cunku kendi isime ters dusmus olurum. Ama eger olayin kalip yapmak ise daha kolay bir yolu var.
Osdoyi PhD emin ol senden almayı öyle çok isterim ki anlatamam. Sırf sana destek olması için bile alırım. Ancak Türkiyedeyim ve sadece takı vs gibi ürünleri epoxy ile yapmak için bunlara ufak kalıplar basabileceğim bir yol arıyorum. Varsa başka yöntemlerin bunları da duymak isterim. :)
Su sekilde yapabilirsin: 1) yapmak istedigin sekli 3d print et. 2) smooth-on dan silikon al ve o 3D bastigin sekli baska bir kabin icinde bu silikon ile moldla. Boylece senin son istedigin silikon moldu elde ediceksin. Sonra onun icinden cikti alabilirsin.
Osdoyi PhD evet. Bu yöntem de araştırmalarımda rastladığım bir nokta. Ancak bu benim için zaman kaybına yol açıyor ve ekstra maliyet. Esnek filament ile normal bir 3d yazıcıdan direk kalıbın kendisini basabilmem mümkün mü sence ?
@@goygoycu3631 esnek filamentler bu kadar esnek degil malesef.
Thx. How calibrate xyz steps you use ? thx
I general motor came calibrated within the firmware regarding steps/mm. I dotn recalibrate them unless it is necessary
How do you rotate the print and then lower it so it’s on bed ?
There is a rotate function on the left and you can reposition the z by moving it. All you need is on the left panel
Hi,
There is a new setting called "Apply extruder offsets to GC" should I check or uncheck it? Do you think they will ever add a standard profile for the printer?
I just hear that new settings. So you should google it
@@3DPDoctor yeah, I googled it but didn't find anything that is why I asked. Thanks anyway!
Interesting. I will look at it when I have find time. Let me know if you find any leads
@@3DPDoctor So according to my research it refers to the offset of 2 or more nozzles. So if you only have one nozzle it shouldn't matter
Gotcha!
YOU ARE BEST OF BEST.Thanks for this helpful video.
Accent is turkish indeed. Cool video!
tnx sir
güzel video
Merhaba, hala aynı ayarları mı kullanıyorsunuz yoksa değiştirdiniz mi ayarları?
retraksiyon ayarını değiştirdim . deneme yanılma ile yazıcım için uygun bir ayar buldm
Why reduce the bed size? Actual bed size is 235 and cura reduces the printable size automatically.
It doesnt say so. Are you sure bed size is 235?
@@3DPDoctor Its the same as the other variants of ender 3.
@@judobadger i am going to measure it. User manual and what you are saying are different
Okay I measured it. Yes it is 235mm overall. And I understand why they say 225 in their user manual. There are silver clips unlike binder clips that are hooding the bed. And I think thats why they shrink it to prevent any potential hits.
@@3DPDoctor Yes, but cura does that automatically, by setting it lower you just get less bed space.
i have Anet ET5 Pro, can you help for best cura setting?
bu ayarları kesin bire bir aynısını yapmamız gerekiyor de mi
If I used a 0.2 feeler gauge to level my bed but do a 0.1 print is there anything I need to change on my offset to make up for that .1 change?
I don’t understand your question. How are u doing that?
Selam güzel kardeşim türk müşsün ben Ender 3 V2 aldım cura da internette Ender 3 pro işaretliyorlar ve ayar yapmıyorlar onların yaptığını mı yapayım yoksa senin yöntemine Ender 3 seçip ayar yaparak mı şimdiden teşekkürler.
Ikisini de deneyebilirsin. Sana bagli. Diyer yonteme bakmadim.
Peki senin yöntemine Ender 3 V2 nin sonuna kadar kalitesini alabilirmiyim etkiler mi
“Sonuna kadar” guldurdun beni. Mutlu olursun merak etme
Can you explain please what does mean x-min (x-max, y-min, y-max) in Printhead settings? I can not find the definition of this settings. I bought Voxelab Aquila It's settings same as Ender's. But i do not understand why nozzle position after autohoming is right on projection of clamp for heatbed. It seems like machine after starting print will collapse to that clamp.
It is mainly to know the projection of the extruder on top of the bed. In the case that you print multiple objects not at the same time, cura will prevent hitting the already printed object with those settings. So probably you may not need it at all.
@@3DPDoctor Thank you!
Pretty much regarding in regards to learning the regarding CAM software for the beginners of regarding printers.
Regard regard?
mesela bir figür basmak istiyorum ama çok büyük olduğu için onu parça parça basmam gerekiyor nasıl yapabilirim veya yapabiliyor muyuz öyle
Of course. Yapabilirsin. You need to learn. Konu ile ilgili youtube da baska videolar. 3d shape leri parcalara bolerek kucuk kucuk basip birlestirebilirsin. Keyword: meshmixer
@@3DPDoctor daha çok malzeme açısından araştırma yaptım yazılım konusunda zamanım olmadı pek
Onu da yapmalisin, bir butun haline getirmelesin konu ile ilgili bilgini.
@@3DPDoctor onuda öğrendim şimdi teşekkür ederim
@@3DPDoctor sence ender 3 v2 almalı mıyım yoksa aynı fiyat bandında daha iyi yazıcı var mı sence
Im trying to print flesh tone PETG with a 0.4 metal nozzle. What would be the best setting for getting non-blob and non stringy filament extruding?
Well I don’t have much experience with petg but to remove stringy (oozing) you need to increase your retraction distance. Try 7mm or 10mm.
how do you know what settings to make so that the figure is a good result and does not turn into spaghetti ? i would like to print a figure but do not know what settings to use. the creator did not leave any informations.
Which figure? My settings are generally good for most of the figures. Don’t forget to enable support if your figure has steep overhangs. Also if you have bed adhesion issues use raft and relevel your bed also
@@3DPDoctor the thing I want to print is this.
www.thingiverse.com/thing:4017021
First 2 print where a failure. Printing the next one with support and rafts.
But there are parts where the printer tries to print something but the nozzle is in the air. And I don't know why
It should work when you enable supports. This seems like a simple model. Let me know if it works
@@10Rey01 Turn on Support, and choose everywhere
Hello, thanks for the information in the video, I have a question, I have a design that I am interested in printing, its dimensions are 250mm (Length), 60mm (width), 70mm (height), so, will I be able to rotate the figure like you did in the video so that the Z Axis can print the 250mm part? I understand that the dimensions of the ender 3 are 220x220x250
Check it out in cura software
sure you can , 1st: your length (250mm) is out of ender 3v2 build plate .
so if you change the (length) 250mm to become the (Height) your progress will complete successfully.
Note : Make your model Rotation BEFORE slicing it.
How can i know how much mm the layers should be?
It depends on what you need. I generally use 0.2 mm layer height for my prints if I dont need precision
@@3DPDoctor with 0.2 mm layer height , what about other changes i have to do?
For what? I think rest is clear in the video
@@3DPDoctor hey also i got the bltouch but it isnt turning on and working even tho i plugged it in any tips?😅
Did you update the firmware?
How do I fix small screw holes getting filled please help
Do you use support? What do you mean filled? Use high resolution
@@3DPDoctor I don’t use support and I don’t know how to change quality
Well, it is hard to help at this point. Are you a beginner? And what is the diameter of your hole + is it vertical or horizontal?
@@3DPDoctor i have everything on auto
Refer to my previous questions please
Mine won't stick to the actual base, what do you recommend?
Did you level it probably? First thing is to check levelling. If it is correct and I assume your machine is new, it should stick properly if you are using PLA. Use letter to level it.
Osdoyi PhD I did that and I am having trouble, is there anything else you recommend
Chekc the first layer height, you can babystep it, i assume. Also check the filament flow rate, also when was the last time you cleaned the bed with IPA ? If you touch it too much there can be skin oil causing it.
50-60 is not much of a problem. I printed with 50 before
I'm impatient, so I use a craft store Hot Glue Gun.
It's always dependent on what you're printing:
- In Cura slice set it with a "brim".
- Start the print.
- Let it loop around 3-4 times and "Pause" the print.
- Using the hot glue gun dot anchor a few strands like you are pinning down a map on a cork board,
- Resume the print.
- When it rises up a few millimeters, or if you notice it starting to separate from the plate, use longer runs of silicone tracing around the brim connecting a layer of silicon to the glass plate, which will greatly help anchor the feather light model down.
- DONE. Total prep time depends on set "print speed". My print speed is 200. So, at 200 anchoring time takes around 12-15 mins, then I can go do something more productive.
SO, WHAT'S GOING ON:
The heated plate ISN'T hot enough to keep the silicone in a liquid state, thus anchors the model down, long enough over the hours for the model's natural gravitational built up weight to anchor it down by itself overtime.
This method means no more babysitting. No more coming back to a plate full of plastic spaghetti. Clean your plate less often. Visit friends and sleep in peace.
My use is mainly for test modeling, and rarely for a polished finish, so this might not be for everyone, so use a piece of paper and level the bed.
Optional Note: because I don't like waiting for warmup.
While paused it will go into hibernation mode and start to cool off. Stop this cool-down by quickly going to "Tune" settings while paused, and keep the hot tip and bed temp at their respective temps (Mine is set to 200/60).
Thanks, very clear guide. I followed it but I noticed some of my settings in the print settings are different.
For example in Build Plate Adhesion I've only 1 option of choosing "Build Plate Adhesion Type". I'm using version 4.7.1
It might be hidden. Check the options by clicking gear symbol and unhide other options
got this printer 3 days ago ,,, got 2 prints out of it then nothing for 10 hours leveling bed ,,then final got a half ass print ,,, then u guessed another 10 hours bed leveling LOL Sold printer next day :)
Wow thats is extremely sad dude. Mine is working perfectly
Lame
Got mine two weeks ago, leveled it, over 20 prints and no releveling. You gave up too quickly,
It is a game of patience. A printer needs babysitting for a bit until you learn the tricks :)
18hs? much
there have to be something wrong a simple thing cannot take 17 hours to print
How do you fix the 3d models quality tho? Mines always comes out pixelated
Out of which software? If you use autodesk inventor professional, while exporting your stl model, there is quality section. That increase the number of mesh points. At what stage you are getting pixelated models?