Lower the 10mm nuts around the assembley until u reach the middle then there's 2 small clips at the very back held by 1 phillip screw on each side remove those then u can slide it back and out
By prayers and hopes 🤣 jk lower the assembley starting from the back bunch of 10mm bolts and nuts until u reach the middle then remove them half way then u got 2 clips 1 each side on the back each has 1 phillips screw on top remove that then u can slide that out and the visor just slides back
@@96domatyo ok thank you.. im doing the same thing, suede headliner and starlights. But this is my 1st time doing nething like this. If I have ne questions would u mind if I ask for some help from time to time if I need it?
Hey man i know its a late comment but how did you manage to do all the creases? Some people told me a steamer helps. Cause the oh shit handles are a pain in the ass. Any tips would help man! Looks amazing by the way!
Honestly they werent too easy but u do need a little more glue plus u wanna work it in small sections if its the ones around sunroof u need relief cuts if its ones like the oh shit handle u have to little by little
Headliner comes out first but as far as the sunroof cover there's 2 small clips in the back of the rail held by 2 Phillips 1 each side remove those and loosen few of the nuts that hold the assembley so u can lower the back a bit and slide the cover back till it's out
Unbolt the seatbelt bracket then there's a clip at the bottom pry it out then be careful at the top right behind where it has the airbag sign u will need a long needle nose pliers squeeze the sides and pull it out its PITA but u can do it just be patient
@@96domatyo thanks got that off, a little bit different since I have the sedan. I’m on another part. Did you have to remove the connectors to the sub antenna as the wiring runs along the headliner
@@96domatyo oh my bad cause he asked how many did you use but you said you got 4 so I thought you meant you bought 4 m didn’t know that what you meant by how much you used for the car as well 😓
@@itswellmade3616 that will really depend because if u mess up a piece u will have to use more especially if u mess up the headliner as far as i remember there was one small piece that i messed up on and re did back then but everything else was easy
How much material should I get I wanna do it right now but I don’t know how much
If I remember correctly I bought 4 meters total
Question can you still drive the car with everything off
Yes ive done this 4 years ago i still own the car
@@96domatyo okay really appreciate it
@@alainmedina8441 and just to give a clearer answer yes you can drive with the trims off
@@96domatyo thank you man really good videos on the suede
where did you get the material from???
Late response bro I’m sorry bout that, but for the headliner there was this like orange foamy thing, did you peel that off?
Id recommend removing it if u want it to have like a spongy feel you can add new layer but u dont have to
@@96domatyo I saw you kept the foam for yours, has it sagged since doing the install?
@@joeldiaz615 I only kept some of it but no sagging anywhere its still holding just as good to this day
I know it’s super late lol but 3m 90 adhesive spray 10/10 recommended!! Works great
Oh thats good to know have you tired it?
@@96domatyo Yeah I’m currently working on it now saw your vid and it looked super easy, all the trim pieces are done now I’m onto the headliner
@@MrNewyorkfynest nice I was just worried about how long it would last for
How you take off the sunroof piece
How do you take off the sun roof slider
Read the comments
How did you remove to sunroof shade?
Lower the 10mm nuts around the assembley until u reach the middle then there's 2 small clips at the very back held by 1 phillip screw on each side remove those then u can slide it back and out
Bro how did you take apart the sunroof door??
By prayers and hopes 🤣 jk lower the assembley starting from the back bunch of 10mm bolts and nuts until u reach the middle then remove them half way then u got 2 clips 1 each side on the back each has 1 phillips screw on top remove that then u can slide that out and the visor just slides back
Can you swap hr heads into a de block without any problems ?
You could but its not worth it
Chebo and keep up the 🔥 content
Great video brother
hey do I have to remove all of the old headliner fabric? or can I get by just placing the suede on top of it?
Just remove it its way better
@@96domatyo ok thank you.. im doing the same thing, suede headliner and starlights. But this is my 1st time doing nething like this. If I have ne questions would u mind if I ask for some help from time to time if I need it?
@@straightdropped941 it was my first time too! But yea message me on my IG and ill help you with what I can
@@96domatyo ok cool ty.. I don't have it tho, do u have fb?
@@straightdropped941 its my name same as my channel
where did you get the headliner from
Great video, the interior looks really good, nice job man.
Thank you so much!
Hey man i know its a late comment but how did you manage to do all the creases? Some people told me a steamer helps. Cause the oh shit handles are a pain in the ass. Any tips would help man! Looks amazing by the way!
Honestly they werent too easy but u do need a little more glue plus u wanna work it in small sections if its the ones around sunroof u need relief cuts if its ones like the oh shit handle u have to little by little
How u took out the sunroof
Headliner comes out first but as far as the sunroof cover there's 2 small clips in the back of the rail held by 2 Phillips 1 each side remove those and loosen few of the nuts that hold the assembley so u can lower the back a bit and slide the cover back till it's out
Hey bro where can I buy those parts?
Bro I love the editing
How did you take out the grip handles on the roof?
There's a little cap u pry it off and pull the handle make sure u pull the metal pins if they dont come out so u can install it easier
Domatyo Alright, thanks man. Last thing I needed to drop my headliner.
Hey how do you remove the b pillar?
Unbolt the seatbelt bracket then there's a clip at the bottom pry it out then be careful at the top right behind where it has the airbag sign u will need a long needle nose pliers squeeze the sides and pull it out its PITA but u can do it just be patient
@@96domatyo thanks got that off, a little bit different since I have the sedan. I’m on another part. Did you have to remove the connectors to the sub antenna as the wiring runs along the headliner
Nice man keep the content coming
Where did you get suede ??
From Fabric land
how many yards did you use
It was in meters but in total i got 4 meters
@@96domatyo how many meter did you use in total cause I wanted to do it for g35 coupe so idk how much to get
@@itswellmade3616 you replied to the answer
@@96domatyo oh my bad cause he asked how many did you use but you said you got 4 so I thought you meant you bought 4 m didn’t know that what you meant by how much you used for the car as well 😓
@@itswellmade3616 that will really depend because if u mess up a piece u will have to use more especially if u mess up the headliner as far as i remember there was one small piece that i messed up on and re did back then but everything else was easy
Good luck with the interior 🤘
Love the look of your car 🔥
Excellent
Hey man, do you have IG?
sorry for the late reply but yea it's my_white_g37