DJI Mavic Pro Camera Flex Replacement - LFC
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Another dive into drones. This time I needed to replace the gimbal control cable inside the camera on a Mavic Pro. This resolves a problem with the gimbal being unable to track / stabilise correctly.
Join the Discord right here: / discord
Support the channel directly at: / adamantit
Follow us on Twitter at: / adamantit
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
I'm one of those people who can't help take things apart to see how they're put together/work. At least with my drone I don't have to now! Thanks Graham!
Hi, it seems that you forget to connect GPS cable that is located at very back side of the top cover. Very easy to overlook and to break while openning. It needs to be detached and attached with the long straight tweezers. So, unscrew only rear 4 screws from top cover and lift it up for about 1cm and you'll see cable with white inline connector. Hope that helps...
This looks a lot like the flexcables fitted in Canon DSLR objectives for the aperture. Moving parts connected with flexcables in steep angles makes for breakage. Awsome to watch you work as always and follow you along as you explain what your are doing is a real blast. Top notch!
Belts and Braces for sure..makes computers a piece of cake in comparison..good job my dude !!
Hope you added silicone glue back on the connectors, they were placed to prevent them from unintended disconnections from vibration during flight.
Awesome didn't know you fixed drones
awesome I didn't know you watched 30 min videos 10 seconds after being published
@@deminybs Ever thought comment first then watch the video.
@@mancavehobbies6213 yeah, but then you'll just have to go back and edit the comment if you wanna say anything else after watching ....since how could you know the content without watching??
other than a general "great video" comment
but nah just effin with you lol, I think we've all done it 😋
@@deminybs First !!!!!,, uh? shit wait ,, 😋
@@ssabykoops almost!! Ha
I like the moment when you got nervous of tiny stuff but I really enjoy this video thank you Garam
I like your (From BANGLADESH) video's your computer troubleshooting or any kind of tech work is very precise & you take enough time to diagnose problem's from it's root then obviously good solution comes up. keep up the good work !
you didnt replace the belt and braces of selastic or equivalent ? to save you stripping it down again if a connector comes out when it falls from grace.
Thanks! Now i can fix my own drone if something like this happens in the future. Got the same drone still working fine after having it for 5 years now. :D
Glad I never had to do a flex in my mavic, but a serious crash resulted in a motor arm needing replacment! that top cover is a pain to get off :)
ive done a few of those! very fiddly but gets easier the more you do, i found its best to pre fold the flex ribbon. made a good bit of money fixing crashed drones bought off ebay
I wonder if those connectors will stay in place without the glue.
Great video thank you for all your hard work.
I no longer have 20/20 vision after three rounds with the eye surgeon and the background on your desk makes your videos difficult to watch, this one especially as the background colours are similar to the drone. Nice work as usual!
I think you should hot glued that new flex cable with connectors,it will come off anytime as drones do lots of vibration.
I considered it, but the funny thing is that the flexes that connect the camera assembly to the mobo aren't secured, and they'll be taking all the vibration. Yet the flexes inside the camera that _were_ secured are on the gimbal that is all anti-vibration mounted.
I’ve just bought the parts to do the same job. Confidence is diminishing after watching your vid 😬 Thanks for posting though, invaluable info for me to at least make an attempt! 👍😁
Cables like that give me the fear of god, broken a few more than id like.
Hope one day they make a more simple to fix design for a breakable part.
What microscope would you recommend Graham ? One that's not too expensive but not a total piece of s--t either?
Awesome Work 👍
Good job!!!
It is interesting, how are stuff puted together 😁. Some are worse and some easyer to work with.
My mate built me a racing drone, it's damn quick
awww you didn't get video of the customer trying it out???
nicely done , looked tedious.....my favorite 😂
Love these vids, please keep them coming.
Does anyone know of a brand of silastic that can be used replace the one taken off this?
They're usually acid free, and a bit gummier than hotglue.
Just waiting for that moment when you notice the video cable was not put back under the shroud 25:43 ish
without glue on cables the connector get loose in while after couple flights. Customer will come back to you. As you should put at least hot glue to seal it some what was from factory
My mavic pro ad the same repair. Or an entire new camera module aparently
wow your amazing that was fiddly
Lets fix drones added.
OUCH ! You should only ever use the lens guard while in transport it should never be attached when the unit is powered up.
Why not use plastic pry tool instead of metal one?
What? Dint glue in the connectors? You are asking for trouble... Matter of time when the costumer comes back...
Nice fix next time putt some silicone clue back connectors will vibrate off and you need to do the job agian.
how dose it go ee-erer 25:55
solastic goop he says
Really...duck tape and solder?!...hmm..you"ve never seen mine...lol...where there is solder..and electrical tape...i can run mine into a hard object...and still fly again..tho i try not too.
you are too cool, is there anything you can not do ??
A lot! But having a go is the first step toward learning something new!
Wow He fixing something...lol
You must have nerves off steal.
Let's fix NOT computers. How about "let's fix electronics"?
you took the most intricate part of the replacement and sped it up...... you sped it up? really ?