The best thing about these videos is 3 generations of men working together. That’s the most beautiful, age-old tradition, the importance of which can not be overstated. I was fortunate to be able to wrench and build with my father and the confidence and self reliance that builds in a young man, not to mention the transfer of knowledge and wisdom, builds the sort of men sorely needed in this world. God Bless you all, and thanks for sharing with us, it’s a wonderful thing.
Keep up the great work Michelle. I was quizzed over 40 years what a part was and did. I miss him asking now that he is gone. You and Paul make me think of great memories. Thank you.
"We just have to get the motivation to start" Had a boss one time always tell us "Don't let the start stop you" - Always thought this was great advice since we would sometimes spend hours trying to figure out the best place to start and ultimately get nothing done. Found that just starting someplace would usually reveal the best place
I've been trying to get people to understand for years that it's impossible to finish something you don't start, but seems that the fact that something's difficult or complex prevents them from just getting going.
Don’t care what Paul calls things, I know what he’s talking about. It’s what he’s doing, how he does it and the results he gets that make this channel. Bring on the Toyota
Great video! It was a pleasure meeting you and your son. You know, a person can work a job. Be loyal, hard working, learn the ropes, make your bones. Then 20 years later you get a gold watch. That FJ45 is your gold watch! Make it yours.
That's a really cool tow truck. I really like to watch these building videos, they are really good. At least a hundred times better than TV’s artificial car-building programs with staged scenes and silly schedules. Not to mention good humor and funny coincidences, which are true things. I’m glad Paul´s hand it´s better too.
Paul and Michelle, I rewatched this one today, on my dad’s and step-mom’s 46th wedding anniversary, just because Grandpa Sherm was in this one. As others have noted, great to see you and your dad together in the shop Paul, and your son too. I spent little time with my dad as I grew up in a broken home. Spent a little more time with my Grandpa Brown, as he and Gram lived just down the street. Great channel, great learning/teaching, and a blessing to know you (virtually).
In the UK the drive line can still be called the prop shaft, by old schoolers like me, although I did escape and move to the US. Oh and snap rings can be called circlips.
@Andy Bush, you forgot that zerk fittings or grease fittings are called Grease Nipples, the hood is called the bonnet, the fenders are called the wings and the trunk is called the boot and of course the dump is called the local council recycling center and they charge you a fortune to get rid of your scrap metal! we're certainly divided by a common language!
It must be a "Generational" thing, I'm about the age of Grampa Sherm and I just have to save old parts because I know they will be needed some day! LOL!
I just learned about Grandpa Sherman. Sorry to hear. I think its awesome you have these videos with him working on this truck, its something that you can recall and see. Memories are one thing, but having him on camera is pretty special.
I love that truck! A little tip an old timer taught me with u-joints: When you get done putting them together and they’re a little tight, just wrap each one of the flanges or ears on the yoke that surround the u-joint cap with a hammer and they’ll move like butter after. Agreed - Spicer are the best🙂.
Nice to see family working together. My wife and I were installing a trailer hitch and my little son was watching with bright eyes. I was telling him that I’d teach him how to work on his car one day, but then I realized, by the time he is driving, he might end up getting an electric vehicle. Batteries are getting cheaper and gas is getting more expensive.
Great job Paul !.....looks like the old man loves the sound of that wrecker also !!.... your knowledge is outstanding !!...Camera work and editing is amazing ( kudos to Michelle)....rock on guy's 🤘
I’m kind of surprised to see you guys throwing anything away!! You have told us all the stuff you have found at the dump…. You remind me of a guy I used to know he would go to the dump once a week but would always bring more treasures home he found than he took
I wished I would of known about those Spring hangers when I had My 87 GMC Squarebody. Would of definitely had them put on mine. The old wrecker is looking Good. Great Job Guys. Its nice to see a Father and Son working together and Not arguing the whole time...AWESOME.. Thank You for sharing..
I have always felt that each of them quietly assumes they know more than the other, but both of them knowing it doesn't matter because they are working together.
I had a little cat that moved in my shop years ago, 19 years later he passed away. After he hung out for some time and come winter we put a cat box in the corner by the overhead. We took him in got all his shots and had him fixed. I also put in a catflap/catdoor with a 2X2X2 mud-room inside and out of the wall. I added a tight fit obstacle course outside to help prevent dogs and larger wildlife from getting in the shop when we weren't around and it worked. Mice were a thing of the past, mice droppings were a thing of the past, mice urine on everything including receipts was a thing of the past. That little un-wanted cat ran a tight ship keeping ne'er-do-wells out of his domain.....no mice, no squirrels, no chipmunks, no gnawed electrical no gnawed nothing. Make it so she can get in and out, keep her water fresh, keep her food fresh, and keep that food & water 3 or 4 feet off the floor. I think that little black cat will earn her keep. ps: Ours was named GMC short for Grease Monkey Cat, go ahead and use that name. Add her to your video's, and she'll become part of your channel.......People like dogs and cats.
Hey there Michelle, you done good with your name that part, just so your other half doesn't lead you astray, that clippy thing, is what we call a "Circlip" down here in Aussie land !! 🤗 You all keep safe and well !!
Grandpa Sherm and my Dad are brothers from another mother. Dad built everything he needed and couldn’t bear to part with anything metal because it would be used some day. He also usually came home from the dump with a treasure that he couldn’t believe someone had thrown away. Dad would have loved your shop. The ratty Bobcat in my profile picture is one he rescued.
To me the "drive line" is the entire drive system, engine, gearbox, drive shaft, and axle. But everyone use words differently, all the time, and about all sorts of stuff. If it's clear what your talking about, then the words have done there job. Much like the way Paul uses his tools. Keep up the great content.
Back in the mid-sixties, I was a mechanic in the Army, in Germany. A part of my job was to inspect behind the truck drivers to make sure they had hit all the zerk fittings on their trucks. I had more than one driver that had tried to grease the wheel cylinder bleeder valves.
Good to see you working with your dad. Soak up all that you can! I miss that. Also here in NC drive lines/drive shaft are a pretty much interchangeable term so not just a Utah thing.
Paul and Family sooo sad to hear of Poppa Sherm's passing he was always what I could tell from watching soo many great videos THe Guiding Light that started the Whole Fab Rat LIfestyle if you will... he was sooo sweet,caring under spoken and always there when anyone needed him...Dude i'm fighting a wall of tears right now...I absolutely Love you n Michelle and ..the whole Family.I Pray for the peace that surpasses all understanding and the Absolute unconditional LOve of our Heavenly Father to fall upon your whole family/community...I Love ya'll and enjoy yer content..God Bless you..
RIP Man it's sad watching this after seeing you do the air bags. But your dad looked to be proud of his son. God bless to you and your family. Hooe the best!
been watchn your vids 4 a long time...you guys are livn a good life... workn for it for sure... one thing i love... you never hear ...beer.. or drinkn.....or going to the bar... thinkn thats why your gettn so much done....and your happy.. love that the wife is involved ...love all your family.. friends .. your tempting me to move out there.....love the snow ...
here in Eugene Oregon, we have a shop that's called driveline service of Eugene, they fix and build driveshafts, and man they are expensive. Having Paul do his own work saves a bunch of money. My vote is driveline just seems right:)
I have used that shop in Eugene before. You are right that they are expensive but they did a great job building a pair of drive shafts for my M1009 Military Blazer
My Sympathy to you and your family on the passing of your Dad. That must be awful hard for you to lose your Dadand best Friend. All the best at moving forward and the repairs to Dad's tow truck. It is a sweet truck for you to keep your Dad on your mind while using it. Your Dad will be watching over you while you are working on it. All the best and take care Paul you do an awesome job.
I thought I was the only tightwad that washed ear plugs. Doesn’t make sense to me to throw something away and buy new that takes less than 30 seconds to clean up. Good job. Love the videos 👍🏻
GrandPa Mad Maxx! Full tank is best, Fumes are what blow up! Ya gotta respect that the boy knows & appears to live A simple, Real, Creative life, centered in family, like A good man should.
Good job, Michelle, on name that part! Did I hear Paul call that a grease "zert"? My dad used to call it that, too. I believe "zerk" is correct though, so make sure to give him a little grief! 🤣 Paul, I think there's still a leaky fuel tank to address! 😁 Great stuff as always!! Keep keeping it real and fun! 🥰❤
Not that 1 ton springs will ever ride or flex very good but I was amazed at how much it helped flex on some of my old jeeps by keeping the leaves oiled up. Usually sprayed silicone spray but even a light spray of used motor oil makes them work way better. With a load it's gonna flex one way or another I guess.
Another great video for a Sunday morning! And I have to add that they're much more enjoyable than watching any of the popular cable TV shows where the script is force-fed by the members with overly-exaggerated enthusiasm and most of the fabrication is consisted of simply bolting on a lot of high-priced aftermarket parts.
Great to see you use the genuine “Spicer” U-Joint - I stopped shattering U-Joints after going back to Original Spicer joints. I am guessing I had 20 inferior quality joints in the junk stack, prior to returning to Spicer. The question at 13:45, I hear that reference interchangeably often while working on that combination of parts. Does not seem like a geographical only term. 😊
I know that thought process "just gotta get started" to well lol I wanna see the truck off road again for a comparison , see how it flexes and handles now ... Good job Paul and I enjoyed the "guess that part" with your wife ...
I have enjoyed watching your videos big thumbs up and 5 stars all the way ! This is the video that got me to use my phone and leave a comment ( normally I watch on smart tv ) you are putting in u-joint snap ring which In my garage are known as Jesus clips ( Jesus where did that clip go ) thanks for the great entertainment and educational videos keepM coming !
Fantastic work and video Fabrat as usual. The last bit when your father test drove the truck, he looked so comfortable and at home, looks like he has this truck for a very long time and enjoy using it. This vehicle has a mad Max feel to it. I'm loving it.
When I started working around cars they were driveshafts but when I started working at a heavy truck dealership they were drivelines. They are the same-things just different terminology. 👍
Maybe it comes from the fact that most trucks are long enough that they need two or more driveshafts connected together? Then the two driveshafts and the connecting u-joint is now a driveline?
Geez Paul, I didn't think you and Grampa Sherm ever went to the dump without coming back with something new to fix😉 Looks like the tow truck is ready to make another impossible recovery 😁 Good job everyone 👍👍
I'd run the charging cable from the main battery through a relay hooked to the key switch so you don't deplete your starting battery with winching if the engine isn't on. Still waiting to see you start working on that Toyota. I think you might need to add another bay to the shop to work on more projects at once. 🤔🤔🤔
Grandpa knows that the next time he needs a new suspension, driveshaft, and tires on the old tow truck he just needs to loan it out to you and Matt for an afternoon.
Drive line, drive shaft or those one things that turn the front and rear axles we know what you mean. Paul, you do great work, never mind the ones who like to nitpick. 👍👍👍💯
Love seeing Grandpa Sherm smiling and smooth driving that old Chevy. I am just like Grampa Sherm saving on those old pieces, as soon as you throw them out, you will need them and have to drive an hour to replace them!
Hey Paul ... Luv your videos. I thought I'd mention not to run that Optima battery in parallel with the lead acid batteries in the back of your truck. The Optima battery is different with a low internal resistance and may cause issues. I would isolate with a solenoid tied to ignition hot. May be okay under charge voltage but only with charge voltage is present.
Chip, what you reference as the driveline, we actually refer to as the powertrain here in Utah. Which is why we often use Drive shaft and drive line interchangeably.
Thanks for the videos. I always installed the cardan shaft with the smaller part fixed in the gearbox. Prevents the ingress of water and mud and also protects the glove. (Google translate).
Driveline: everything between the output shaft of the transmission to the drive wheels. Transfer case, driveshaft, u-joints, Ring, pinion, spiders, axles, CV’s, etc. Driveshaft: The twisty stick between the transmission/transfer case/transaxle and the axle assembly. However, I agree with him. If we know what you’re talking about, your terminology for a car part is just fine. Ignore the TH-cam professors.
Agreed, When Derek aka Vice Grip Garage calls a carburetor a " Fuel Happener " or a spark plug a "Sparkalator , rust holes "Weight Reduction" we (car guys) know what he is talking about, no need in splitting hairs.
my 2cents... it doesnt matter if he calls the driveshaft a driveline but Ive always called it all from engine fan to differentials the "driveline". Its kind of cool that my son spent several evenings and most of the weekend working on my truck and yard and then you share Paul helpn out pops
Its crazy to me how little rust is on all the bolts compared to where i am in Atlantic Canada, here you need to heat everything red hot before she even moves. After seeing what you did with that seized bushing it made up my mind im getting a plasma cutter. Great videos enjoy your content a lot.
@9:03 I see a little work done on the GMC in the background that hasn't been uploaded. Looking forward to that along with the FJ build. Keep up the good work, love all your videos.
Love this channel every region has diff names for stuff ie: driveshaft, driveline, shaft. Like skid truck, roll on, flatbed, all for same type truck. Wish I had as much talent as Paul for fabbin.
The best thing about these videos is 3 generations of men working together. That’s the most beautiful, age-old tradition, the importance of which can not be overstated. I was fortunate to be able to wrench and build with my father and the confidence and self reliance that builds in a young man, not to mention the transfer of knowledge and wisdom, builds the sort of men sorely needed in this world. God Bless you all, and thanks for sharing with us, it’s a wonderful thing.
I really enjoyed that episode nothing like hanging out with your dad for the day and helping him by making his life a little easier...
Keep up the great work Michelle. I was quizzed over 40 years what a part was and did. I miss him asking now that he is gone. You and Paul make me think of great memories. Thank you.
This comment made my eyes leak.god bless.
@@wakeupamerica4610
Same here
I haven't cried in a while. Thanks for being vulnerable and reminding me that's its ok to feel. My condolences, may your dad rest in peace. ♥
"We just have to get the motivation to start"
Had a boss one time always tell us "Don't let the start stop you" - Always thought this was great advice since we would sometimes spend hours trying to figure out the best place to start and ultimately get nothing done. Found that just starting someplace would usually reveal the best place
good stuff
I've been trying to get people to understand for years that it's impossible to finish something you don't start, but seems that the fact that something's difficult or complex prevents them from just getting going.
So sorry for your loss. Glad to see you will continue the family tradition and the spirit will live on.
Don’t care what Paul calls things, I know what he’s talking about. It’s what he’s doing, how he does it and the results he gets that make this channel. Bring on the Toyota
Exactly my friend.
Oh yes, can’t wait for that build. 👍🏻🇷🇴🇬🇧
ABSOLUTELY!
Repeat after me driveline equals driveshaft, driveline equals driveshaft……
He's a great fabricator. He's a median mechanic.
Really wish I had that kind of relationship with my father. Wishing you the best.
So great to see Paul and his Dad working together...... 🙂
Great video! It was a pleasure meeting you and your son. You know, a person can work a job. Be loyal, hard working, learn the ropes, make your bones. Then 20 years later you get a gold watch. That FJ45 is your gold watch! Make it yours.
That's a really cool tow truck. I really like to watch these building videos, they are really good. At least a hundred times better than TV’s artificial car-building programs with staged scenes and silly schedules. Not to mention good humor and funny coincidences, which are true things. I’m glad Paul´s hand it´s better too.
Paul and Michelle, I rewatched this one today, on my dad’s and step-mom’s 46th wedding anniversary, just because Grandpa Sherm was in this one. As others have noted, great to see you and your dad together in the shop Paul, and your son too.
I spent little time with my dad as I grew up in a broken home. Spent a little more time with my Grandpa Brown, as he and Gram lived just down the street.
Great channel, great learning/teaching, and a blessing to know you (virtually).
In the UK the drive line can still be called the prop shaft, by old schoolers like me, although I did escape and move to the US. Oh and snap rings can be called circlips.
@Andy Bush, you forgot that zerk fittings or grease fittings are called Grease Nipples, the hood is called the bonnet, the fenders are called the wings and the trunk is called the boot and of course the dump is called the local council recycling center and they charge you a fortune to get rid of your scrap metal! we're certainly divided by a common language!
Circlips or C clips go around a shaft and open outwards. Snap rings go into a recess and open inwards.
Whenever I hear "circlip" I think "Sir Clip" the recently knighted Mr. Clip.
@@ronwilken5219 circlips can be external ( opening out) or internal ( opening in)
That truck deserves its own scale replica. Take my money.
It must be a "Generational" thing, I'm about the age of Grampa Sherm and I just have to save old parts because I know they will be needed some day! LOL!
If you can keep them organized, a garage full of parts is a generational gift... Just don't plan on moving!
You won't need it, until the day after, you get rid of it
@@kschleic9053 boy can I relate !!!! I moved well still moving a year later . Lived 25 plus years in one spot .
Who would of thought that 68 Nova parts cross over to 95 K1500 diesel? At that point my "junk" became stuff.
I just learned about Grandpa Sherman. Sorry to hear. I think its awesome you have these videos with him working on this truck, its something that you can recall and see. Memories are one thing, but having him on camera is pretty special.
Ratrod wrecker repairs I'm glad to see that you are springing into action. Michelle keep laughing when you're eating his candy.
I'm so sorry for your loss buddy!
As soon as I stop fricking crying I'll call my Dad and tell him how much I love him, right now when I can...
I love that truck! A little tip an old timer taught me with u-joints: When you get done putting them together and they’re a little tight, just wrap each one of the flanges or ears on the yoke that surround the u-joint cap with a hammer and they’ll move like butter after. Agreed - Spicer are the best🙂.
I’ve never had that fail myself. Grandpa showed me the same thing. Thanks for sharing
Nice to see family working together. My wife and I were installing a trailer hitch and my little son was watching with bright eyes. I was telling him that I’d teach him how to work on his car one day, but then I realized, by the time he is driving, he might end up getting an electric vehicle. Batteries are getting cheaper and gas is getting more expensive.
Editing on this video was just TOP NOTCH. Seriously, the quick cuts and everything were spot on. 👍 Way to go team!
it a drive line in Wyoming also.
what ever Paul calls it works. Keep up the good work !!!
That is a sweet yard truck, definitely looks like a Mad Max rig straight out of the desert
They didn't show how much they dragged back home.
@@4dogyard to be seen in an Upcoming video….😂
It's nice to be working with your Dad, Paul. Brings back memories on this end. Luck to all your family members.
Great job Paul !.....looks like the old man loves the sound of that wrecker also !!.... your knowledge is outstanding !!...Camera work and editing is amazing ( kudos to Michelle)....rock on guy's 🤘
That dump trailer is awesome!
I’m kind of surprised to see you guys throwing anything away!! You have told us all the stuff you have found at the dump…. You remind me of a guy I used to know he would go to the dump once a week but would always bring more treasures home he found than he took
It's so Kool that you were able to Build your Father's Tow Truck with Him FabRats. I never got that Opportunity to do that with my Father.
I wished I would of known about those Spring hangers when I had My 87 GMC Squarebody. Would of definitely had them put on mine. The old wrecker is looking Good. Great Job Guys. Its nice to see a Father and Son working together and Not arguing the whole time...AWESOME..
Thank You for sharing..
I have always felt that each of them quietly assumes they know more than the other, but both of them knowing it doesn't matter because they are working together.
I had a little cat that moved in my shop years ago, 19 years later he passed away. After he hung out for some time and come winter we put a cat box in the corner by the overhead. We took him in got all his shots and had him fixed. I also put in a catflap/catdoor with a 2X2X2 mud-room inside and out of the wall. I added a tight fit obstacle course outside to help prevent dogs and larger wildlife from getting in the shop when we weren't around and it worked. Mice were a thing of the past, mice droppings were a thing of the past, mice urine on everything including receipts was a thing of the past. That little un-wanted cat ran a tight ship keeping ne'er-do-wells out of his domain.....no mice, no squirrels, no chipmunks, no gnawed electrical no gnawed nothing. Make it so she can get in and out, keep her water fresh, keep her food fresh, and keep that food & water 3 or 4 feet off the floor. I think that little black cat will earn her keep.
ps: Ours was named GMC short for Grease Monkey Cat, go ahead and use that name. Add her to your video's, and she'll become part of your channel.......People like dogs and cats.
Hey there Michelle, you done good with your name that part, just so your other half doesn't lead you astray, that clippy thing, is what we call a "Circlip" down here in Aussie land !! 🤗
You all keep safe and well !!
Grandpa Sherm and my Dad are brothers from another mother. Dad built everything he needed and couldn’t bear to part with anything metal because it would be used some day. He also usually came home from the dump with a treasure that he couldn’t believe someone had thrown away. Dad would have loved your shop. The ratty Bobcat in my profile picture is one he rescued.
To me the "drive line" is the entire drive system, engine, gearbox, drive shaft, and axle. But everyone use words differently, all the time, and about all sorts of stuff. If it's clear what your talking about, then the words have done there job. Much like the way Paul uses his tools. Keep up the great content.
Drivetrain is the word you're hunting
@@854XTOY Correct, drive line is the parts of the drivetrain after the transmission. So; drive shaft, differential, axels, and hubs
@@keelanbarrette529 axle
Nope, driveline is same as drive shaft.
At least in truck shops where we build and modify trucks all day every day.
If it's not a driveline then the thousands of shops i have seen through out the year's will have to change their signs to driveshaft repair. 😅🤣
Back in the mid-sixties, I was a mechanic in the Army, in Germany. A part of my job was to inspect behind the truck drivers to make sure they had hit all the zerk fittings on their trucks. I had more than one driver that had tried to grease the wheel cylinder bleeder valves.
Good to see you working with your dad. Soak up all that you can! I miss that. Also here in NC drive lines/drive shaft are a pretty much interchangeable term so not just a Utah thing.
You should be proud of the relationship you guys had. I’m off to have coffee with my dad now. Take care.
That truck is suh-wheet! Definitely deserves some TLC. can't wait to see it on the next recovery mission 👍😁
Hey Ivan!
Paul and Family sooo sad to hear of Poppa Sherm's passing he was always what I could tell from watching soo many great videos THe Guiding Light that started the Whole Fab Rat LIfestyle if you will... he was sooo sweet,caring under spoken and always there when anyone needed him...Dude i'm fighting a wall of tears right now...I absolutely Love you n Michelle and ..the whole Family.I Pray for the peace that surpasses all understanding and the Absolute unconditional LOve of our Heavenly Father to fall upon your whole family/community...I Love ya'll and enjoy yer content..God Bless you..
Matts slogan “We will get em out” Fab Rats slogan “We will make it work”
gotta get that on the back of your shirts
For a sec I thought that was Ed's Suzuki
“We’ll make it work..maybe”
Legendary observation my friend
RIP
Man it's sad watching this after seeing you do the air bags. But your dad looked to be proud of his son. God bless to you and your family. Hooe the best!
I always enjoy seeing the older trucks getting some love.
haven these videos has to be a blessing to Paul....i know he misses his dad,,,,Angels by your side Paul
It would probably be a good idea to fit a dual battery isolator, so you always have a good starting battery on the trail.
been watchn your vids 4 a long time...you guys are livn a good life... workn for it for sure... one thing i love... you never hear ...beer.. or drinkn.....or going to the bar... thinkn thats why your gettn so much done....and your happy.. love that the wife is involved ...love all your family.. friends .. your tempting me to move out there.....love the snow ...
Thank you for those kind words! It means a lot!
here in Eugene Oregon, we have a shop that's called driveline service of Eugene, they fix and build driveshafts, and man they are expensive. Having Paul do his own work saves a bunch of money. My vote is driveline just seems right:)
I have used that shop in Eugene before. You are right that they are expensive but they did a great job building a pair of drive shafts for my M1009 Military Blazer
MAN....that exhaust note on the ole tow truck is just *chef's kiss*
Just have a strong feeling Grampa Sherm is proud of Paul!
My Sympathy to you and your family on the passing of your Dad. That must be awful hard for you to lose your Dadand best Friend. All the best at moving forward and the repairs to Dad's tow truck. It is a sweet truck for you to keep your Dad on your mind while using it. Your Dad will be watching over you while you are working on it. All the best and take care Paul you do an awesome job.
we are in lockdown no 6 in victoria Australia so your videos are just whats needed ,keep up the good work cheers
Have you guys worked this covid19 thing out yet?
Jesus!
Fire your government, David!!
So much love in that shop, truck, and family. So sorry for y'alls loss
I thought I was the only tightwad that washed ear plugs. Doesn’t make sense to me to throw something away and buy new that takes less than 30 seconds to clean up. Good job. Love the videos 👍🏻
The earplugs aren’t “purposefully” washed, they just get left in his pockets.😉
@@FabRats oh well. Either way 👍🏻
When I run out of earplugs, I just go to the drawer where my wife drops all of the recently washed ones! AKA. I forget to empty my pockets!
GrandPa Mad Maxx! Full tank is best, Fumes are what blow up! Ya gotta respect that the boy knows & appears to live A simple, Real, Creative life, centered in family, like A good man should.
Good job, Michelle, on name that part! Did I hear Paul call that a grease "zert"? My dad used to call it that, too. I believe "zerk" is correct though, so make sure to give him a little grief! 🤣
Paul, I think there's still a leaky fuel tank to address! 😁 Great stuff as always!! Keep keeping it real and fun! 🥰❤
Not that 1 ton springs will ever ride or flex very good but I was amazed at how much it helped flex on some of my old jeeps by keeping the leaves oiled up. Usually sprayed silicone spray but even a light spray of used motor oil makes them work way better. With a load it's gonna flex one way or another I guess.
Another great video for a Sunday morning! And I have to add that they're much more enjoyable than watching any of the popular cable TV shows where the script is force-fed by the members with overly-exaggerated enthusiasm and most of the fabrication is consisted of simply bolting on a lot of high-priced aftermarket parts.
I totally agree with Da Wabbitt
I remember hearing drive line from back in the 60s.
Dad was quite the mechanic.
Great to see you use the genuine “Spicer” U-Joint - I stopped shattering U-Joints after going back to Original Spicer joints. I am guessing I had 20 inferior quality joints in the junk stack, prior to returning to Spicer. The question at 13:45, I hear that reference interchangeably often while working on that combination of parts. Does not seem like a geographical only term. 😊
Enjoy your channel. Learning so much through your great teaching. Sorry to hear about your Dad. Thanks for eveything.
I know that thought process "just gotta get started" to well lol
I wanna see the truck off road again for a comparison , see how it flexes and handles now ... Good job Paul and I enjoyed the "guess that part" with your wife ...
I have enjoyed watching your videos big thumbs up and 5 stars all the way ! This is the video that got me to use my phone and leave a comment ( normally I watch on smart tv ) you are putting in u-joint snap ring which In my garage are known as Jesus clips ( Jesus where did that clip go ) thanks for the great entertainment and educational videos keepM coming !
As many "u" joints as you wheeling guys have changed thru the years you probably know which ones are best .... thanks for another great video!
Best 3 u-joints are 1) Spicer 2)Spicer or 3) Spicer
@@phendrix9476 correct everything else is just cuz you needed to get somethings done while you wait for the spicer
Fantastic work and video Fabrat as usual. The last bit when your father test drove the truck, he looked so comfortable and at home, looks like he has this truck for a very long time and enjoy using it.
This vehicle has a mad Max feel to it. I'm loving it.
When I started working around cars they were driveshafts but when I started working at a heavy truck dealership they were drivelines. They are the same-things just different terminology. 👍
Maybe it comes from the fact that most trucks are long enough that they need two or more driveshafts connected together? Then the two driveshafts and the connecting u-joint is now a driveline?
It IS a "truck thing".
Sorry to hear about your Dad! My thoughts and prayers are with you and your family!
that truck has saved matt and your hides more than a few times if I recall, she deserves it!
Geez Paul, I didn't think you and Grampa Sherm ever went to the dump without coming back with something new to fix😉
Looks like the tow truck is ready to make another impossible recovery 😁
Good job everyone 👍👍
Love your channel man looks like your a good family man and that truck you and your boy are building is gonna be awesome cant wait to see it in action
I'd run the charging cable from the main battery through a relay hooked to the key switch so you don't deplete your starting battery with winching if the engine isn't on. Still waiting to see you start working on that Toyota. I think you might need to add another bay to the shop to work on more projects at once. 🤔🤔🤔
Talking from frustrating experience, more projects = more uncompleted projects. I wish I had the focus to tackle one at a time.
I like the Johnny cash reference. One piece at a time. Got to love some Johnny cash
Check out Home Free's version of "Ring of Fire" on TH-cam. They are an Acappella country western band.
Great Job Paul and Grandpa Sherm! Glad to see Michelle in the shop some more too! 😎
I think Grandpa Sherm is my favorite family member on this channel.
Thanks for the drive shaft correction Michelle
I have missed "name that part with Michelle" and her infectious laugh. Paul you are a genius and I love this episode with grandpa Sherm.
It's a driveshaft witch is part of the driveline along with the engine & transmission. But call it what you like! Another fine video! Thumbs up! 👍
Grandpa knows that the next time he needs a new suspension, driveshaft, and tires on the old tow truck he just needs to loan it out to you and Matt for an afternoon.
Drive line, drive shaft or those one things that turn the front and rear axles we know what you mean. Paul, you do great work, never mind the ones who like to nitpick. 👍👍👍💯
I’ve been waiting for this video I love grandpa’s tow truck
Isn't this some good s*** on a Sunday morning🖖🖖
Love seeing Grandpa Sherm smiling and smooth driving that old Chevy. I am just like Grampa Sherm saving on those old pieces, as soon as you throw them out, you will need them and have to drive an hour to replace them!
Drive line, Drive shaft, back in Southern Maryland, we'd say, same difference
Hey Paul ... Luv your videos. I thought I'd mention not to run that Optima battery in parallel with the lead acid batteries in the back of your truck. The Optima battery is different with a low internal resistance and may cause issues. I would isolate with a solenoid tied to ignition hot. May be okay under charge voltage but only with charge voltage is present.
The driveline includes everything in the chain from the engine to the drive wheels. A driveshaft is self explanatory :)
Of course you are correct but I kinda like Paul's propensity to just "make up" the vocab as needed. HILL PEOPLE! :-)
Chip, what you reference as the driveline, we actually refer to as the powertrain here in Utah. Which is why we often use Drive shaft and drive line interchangeably.
Love the program & thanks for sharing your gifts & talents with us.
Like the tow truck.
You guys don't sell your scrap for $, that piece of lands bed looked worth saving for a future project to me.
A definitely is worth saving but I'm out of room. And there's not a scrap yard close to me so I just give it to the dump and they scrap it
@@FabRats aww man I should have known no scrap yard, I mean your driving an hour for parts. Love the vids, "keeps" em coming...lol
What a pleasant surprise to see I'm hoping I'll be able to save this video for remembrance God bless the both of you
I'm with Paul-it's a driveline, in total. Their are many parts in a driveline, including driveshafts.
Don’t get caught up in all the negative comments you guys are great.
A drive line or train is the entire drive system a drive shaft is the individual part of the drive line/train.
Thanks for the videos. I always installed the cardan shaft with the smaller part fixed in the gearbox.
Prevents the ingress of water and mud and also protects the glove. (Google translate).
We do it this way so that the rocks don't hit the tube As easy
Driveline: everything between the output shaft of the transmission to the drive wheels.
Transfer case, driveshaft, u-joints, Ring, pinion, spiders, axles, CV’s, etc.
Driveshaft: The twisty stick between the transmission/transfer case/transaxle and the axle assembly.
However, I agree with him. If we know what you’re talking about, your terminology for a car part is just fine. Ignore the TH-cam professors.
Agreed, When Derek aka Vice Grip Garage calls a carburetor a " Fuel Happener " or a spark plug a "Sparkalator , rust holes "Weight Reduction" we (car guys) know what he is talking about, no need in splitting hairs.
Father and son working together. Great stuff.
Im glad im not the only that thought him calling a drive shaft the drive line was odd. Its Paul so i always gave it a pass lol.
Hell, I just always figured he knew something I didn't!! 😁
@@georgeorwell126 he did, the other term for the part. Like calling a transmission a gear box .
my 2cents... it doesnt matter if he calls the driveshaft a driveline but Ive always called it all from engine fan to differentials the "driveline". Its kind of cool that my son spent several evenings and most of the weekend working on my truck and yard and then you share Paul helpn out pops
Come on Paul , cats are cool ! All my dog does is eat , poop , and bark - oh I forgot he wants constant attention lol
Drive line, drive shaft same thing, tow truck looks awesome, love you guys and God Bless You and Your Family
Quit being a cat hater Paul. It’ll keep the mice out of that shop of yours.
I’m with Paul... cats are nasty as pets
I'd rather have the mice.
Its crazy to me how little rust is on all the bolts compared to where i am in Atlantic Canada, here you need to heat everything red hot before she even moves. After seeing what you did with that seized bushing it made up my mind im getting a plasma cutter. Great videos enjoy your content a lot.
@9:03 I see a little work done on the GMC in the background that hasn't been uploaded. Looking forward to that along with the FJ build. Keep up the good work, love all your videos.
Paul is very awesome at what he does it is nice to see him working with the guy who taught him some of these skills
Love this channel every region has diff names for stuff ie: driveshaft, driveline, shaft. Like skid truck, roll on, flatbed, all for same type truck. Wish I had as much talent as Paul for fabbin.
That little dump trailer is badass...love the c10 ..it looks like it's built very well and deives good to...