@SeasonedProjections thanks. I'm looking to get a few new projectors for a fixed install setup on the new house. To get the general results I want I will need 3 of them (I used mad mapper). Having sdi will make this a lot simpler to set up
@dustinnavarro6419 noted and agree with you. Video is done live over hdmi to blackmagic sdi converters and out to 2 current projectors 4.5k lum 1080p that hit the front and 1 side. The red is fine but I'm only covering apx 1/3rd the house going brighter and a tad wider I wand to wrap the front and sides as they are all visible from the street. I current convert sdi back to hdmi for my current setup. The show runs on a pc with mad mapper and an nvidia Quatro A6000. I blend the overlap in madmapper and us a lux meter to check the blend. I also have a DMX bridge and about a dozen moving spots and gobos and 4 laser units Everything syncs
@willease that's OK 👍 👌 If I bust it down. My current setup is 2x Epson 1080P projectors they are attached to a pc running Mad Mapper. That pc has some moderately high-end hardware that can run up to 6 displays in perfect sync. This lets me overlap the aera the projectors aim and use fades to blend them so I can project on curves and around corners with very little distortion. My house is a tall single story 4800sq ft with a large round front room on a corner lot
The little cute faces peeking out of the garage, cute!
Super cool!
Thanks!
Do you produce custom shows?
great mapping.
Thanks!
Great job
You should do Monster House
What projector a lot of pu units and they range from 5-16k lum
This one is 16K lumens. Epson's are great for this type of mapping.
@SeasonedProjections thanks.
I'm looking to get a few new projectors for a fixed install setup on the new house.
To get the general results I want I will need 3 of them (I used mad mapper).
Having sdi will make this a lot simpler to set up
@dustinnavarro6419 noted and agree with you.
Video is done live over hdmi to blackmagic sdi converters and out to 2 current projectors 4.5k lum 1080p that hit the front and 1 side.
The red is fine but I'm only covering apx 1/3rd the house going brighter and a tad wider I wand to wrap the front and sides as they are all visible from the street. I current convert sdi back to hdmi for my current setup.
The show runs on a pc with mad mapper and an nvidia Quatro A6000. I blend the overlap in madmapper and us a lux meter to check the blend. I also have a DMX bridge and about a dozen moving spots and gobos and 4 laser units Everything syncs
@@ZoeyR86 All of what you said is way over this old man's head. As for the video... wow.
@willease that's OK 👍 👌
If I bust it down.
My current setup is 2x Epson 1080P projectors they are attached to a pc running Mad Mapper. That pc has some moderately high-end hardware that can run up to 6 displays in perfect sync. This lets me overlap the aera the projectors aim and use fades to blend them so I can project on curves and around corners with very little distortion.
My house is a tall single story 4800sq ft with a large round front room on a corner lot