Nor-Cal Dave, You are so awesome. For these young guys, learning refrigeration from your is good. Learning about attitude, demeanor and perseverance is priceless. Stay awesome super tech.
I’m 39 years old and I’ve been in the trade for 19 years (since I was 20)… I’m starting to feel too old for this shit these days. You give me hope that I can keep going. However, I still find myself it attics way too often.
That's a nice video. I have a question. Is it normal to use an open-frame fan motor in a rooftop condenser? It would seem like that would be asking for water to get in it.
@@OcRefrig I got mine at NAPA auto but Amazon has it too. It’s the real deal from Loc-tite. It comes in copper or silver, they also make thread locker “red& blue” in stick form. It works very well less messy.
You help me so much Dave, I appreciate all that you do for us younger techs. maybe, consider getting some kind of hands free attachment for your camera so you can always use 2 hands so it aint as much of a struggle
Wow, you've had the bike for 3 years. Doesn't seem long ago when you brought it home. Bummer that you had the belt issue but at least you weren't hurt or too far from home. You definitely have had some good adventures on 2 wheels.
Dave can you please explained again why u are using flux for unsweating components and benefits. I'm trying to find your video but not having luck. Cheers and thanks
Hey Nor-Cal Dave. My name is Jarod and I have been watching your channel for awhile sir. I was wondering if I could ask you a question? I’m new to refrigeration and I have a beverage air milk cooler with a constant cut in thermostat (# 502-139A). I was inquiring if there is a way to lower the cut in temp? The new thermostat keeps wanting to cut in around (41-45*). Thank you
if it's not a new cooler, you probably want to replace the thermostat, they get flaky when old and don't always cut in at the right temperature or the contacts start to fail and not always turn on. ** I totally missed that you said "new thermostat" 🙃 make sure the sense tube is where it should be and the rest of it from that point to the thermostat itself is not in contact with anything, especially not any cold refrigeration tubing or where ice may form. that will keep it cold and skew the cut-in higher and shut off early.
Great Video ! Classic picture you in the u-haul. 😂 - Manual Re-set H. P. SAFETY ! THE NLY WAY TO GO ! That’s the ONLY Way I do it too ! 1) Customer - Wins !!! Big time. Gets his Walk n box cooling same day within a few hours usually & an inexpensive Repair. Customer Very Happy not Having to Replace a Compressor on a Friday Night. 2) Service Tech - Wins !!! Nice little Job , Easy job , makes some decent money , is a Hero to customer , Small bill to customer , Customer Very Happy ! H. P. SAFETY - Man. Reset Saves Compressors EVERY TIME !!! Every Unit needs one ! Period ! Makes EVERYONE’s Life Better ! No Friday night Huntjng down a Compressor, opening supply house , No Big bill to customer, No All Night Working in the dark on a Roof , Saves Marriages , Wife & Girlfriends happier.
Nor-Cal Dave,
You are so awesome. For these young guys, learning refrigeration from your is good. Learning about attitude, demeanor and perseverance is priceless. Stay awesome super tech.
I'm not from the States and when I hear " hard working american " I automatically think of Dave 👍
Rack click bait 😂
Dude! The lord provides….you got the chance to make the customer pay to fix your bike! Blessing in disguise
That was clearly beer money friday afternoon special
That’s what I was thinking
Calibrated hands 😂 , you know what you doing, good video bro
I’m 39 years old and I’ve been in the trade for 19 years (since I was 20)… I’m starting to feel too old for this shit these days. You give me hope that I can keep going. However, I still find myself it attics way too often.
Scetchojawea😂😂😂😂😂😂😂
That's a nice video. I have a question. Is it normal to use an open-frame fan motor in a rooftop condenser? It would seem like that would be asking for water to get in it.
don't worry, I hit the like button twice 👍
Cause he's a super tech.....
Love how you throw in your soundtrack in from time to time
Where I live I call it Friday 3:30 shenanigans
i seen on that fan motor you used some lubbee doobeee a puddins fab shop special
Does that unit have a cover to keep the weather off of it?
what about some angle drill to remove those bolts?
Finger bang and sack o nuts got me rolling 😂
I carry Anti-seize that comes in a stick “ glue stick style” a lot less messy in the bag.
Where do u get it ?
@@OcRefrig I got mine at NAPA auto but Amazon has it too. It’s the real deal from Loc-tite. It comes in copper or silver, they also make thread locker “red& blue” in stick form. It works very well less messy.
@@scottk0623 thanks. 👍 I’ll check it out.
Gooowd stuff brother Dave. Good move on the 2 wheel hell raiser. Was never a fan if a belt. Chains are better.. Stay safe and well
Two belts in all of Cali that's terrible
Love your videos bro
At last the leaves are falling, time to take it easy. I had 4 calls on saturday, but the friday afternoon are the worst.
Only 2 Saturday
My man, no play fuk it. Make that 💰
428 thumbs up
👍👍👍 Awesome Dave
🤘⚡️🤘✨✨🔥
San Diego to Oceanside lost belt at 0430
Yes Changed it also 2002
Great repair
That's why I like my shaft drive🤣. Yama-hammy FJR1300
I new you liked the shaft 😂😂😂😂😂😂😂😂😂😂😂😂
Good call keeping that motor on the truck .. Looked like it was running as smooth as that Harley Davidson paint 🤙🏻
I like the thumbnail pic of a rack 👍. Give me a 3000 lb rack with screw compressors and subcooled controlled surge tank any day.
You’ve got an ebike? Nice 👍🏻
Home made. There’s a video on the channel
I wanab a super tech 😂😂👏👏👌👊
You are a super tech!
I have the same customers that always call after 4, never before. Equipment is always down all day before they call too! Good job buddy
Bummer on the Belt, that chain drive might get a bit louder - just ride faster the wind will kill the noise. 🤣
OMG FINGER BANG BANG its been years, oh snapp i have the same ringer haha
Super tech Big Dave...
I love my chain on the chopper they take a beating and easy to repair !!
You help me so much Dave, I appreciate all that you do for us younger techs. maybe, consider getting some kind of hands free attachment for your camera so you can always use 2 hands so it aint as much of a struggle
Bummer about your bike. Excellent repair video.
Goddamn supertech
Lol
Always enjoy the Norcal Dave lingo
Hoarding parts coming in clutch 👍
Good fix ... Yep , get a chain ... Go Vols !!!
Cool video Dave! loving the high def. Hang Loose!
man...how old was that filter drier ? I never knew they had an aftermarket replacement for that copeland motor....very cool that its reversible.
🤘⚡️🤘👊👊
Nor Cal Dave to the rescue again
Wow, you've had the bike for 3 years. Doesn't seem long ago when you brought it home. Bummer that you had the belt issue but at least you weren't hurt or too far from home. You definitely have had some good adventures on 2 wheels.
Indeed
Awesome work carnal 😎👍
Dave Great workmanship
Yeah , lets keep it going Dave!
only norcal can measure SH/SC with gloves on!!!😂🤣
😂😂😂😂😂
Hi bro from west Alabama
Busy afternoon 👍
Dave can you please explained again why u are using flux for unsweating components and benefits. I'm trying to find your video but not having luck. Cheers and thanks
The pipe comes out clean.
Thank you sir. Really appreciate.
do you carry sporlan's pre built txv kit?
I have danfoss valves flare with the changeable orfice
"Sack o nuts" xD
That place looks like a Denny’s!
Old lyons. Now indy
Hey Nor-Cal Dave. My name is Jarod and I have been watching your channel for awhile sir. I was wondering if I could ask you a question? I’m new to refrigeration and I have a beverage air milk cooler with a constant cut in thermostat (# 502-139A). I was inquiring if there is a way to lower the cut in temp? The new thermostat keeps wanting to cut in around (41-45*).
Thank you
41 cut in is keep the coil from icing up. And totally legit.
Ok thank you very much for your time sir.
@@jarodduke2702 your welcome
if it's not a new cooler, you probably want to replace the thermostat, they get flaky when old and don't always cut in at the right temperature or the contacts start to fail and not always turn on.
** I totally missed that you said "new thermostat" 🙃 make sure the sense tube is where it should be and the rest of it from that point to the thermostat itself is not in contact with anything, especially not any cold refrigeration tubing or where ice may form. that will keep it cold and skew the cut-in higher and shut off early.
Great video. Quick question. Would a 9721 been able to be used?
Is that a 1/2” shaft?
@@NorCal-refrigeration nope
The thumbnail got me way too hyped
I was really hoping you were actually doing some rack stuff
👍🏄♂️🇺🇸❄️💪
Great Video ! Classic picture you in the u-haul. 😂 - Manual Re-set H. P. SAFETY ! THE NLY WAY TO GO ! That’s the ONLY Way I do it too !
1) Customer - Wins !!! Big time. Gets his Walk n box cooling same day within a few hours usually & an inexpensive Repair. Customer Very Happy not Having to Replace a Compressor on a Friday Night.
2) Service Tech - Wins !!! Nice little Job , Easy job , makes some decent money , is a Hero to customer , Small bill to customer , Customer Very Happy !
H. P. SAFETY - Man. Reset Saves Compressors EVERY TIME !!!
Every Unit needs one ! Period !
Makes EVERYONE’s Life Better !
No Friday night Huntjng down a Compressor, opening supply house , No Big bill to customer, No All Night Working in the dark on a Roof , Saves Marriages , Wife & Girlfriends happier.
You need that loud ass Steve lav ringtone man
😂😂😂😂😂😂
👍
Sketchazaweha 🤣🤣
🤘😂🤘😂🤘
Shitty deal on the drive belt, they are supposed to last forever.
They probably do but the cheap HD drive pully looks jank at 32k