Godox AD600 Pro TTL Battery Strobe - Complete Walkthrough
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- strobepro.com/...
Note: This video features the Stroberpro X600 Pro, which was our equivalent model to the Godox AD600 Pro that is currently stocked.
THIS STROBE DOES IT ALL
The Godox AD600 Pro improves upon the popular AD600BM and ups the game for the most performance-minded shooters. The Godox AD600 Pro destroys the competition with features, reliability, accuracy and price.
THE STROBEPRO DIFFERENCE
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, 2-year warranty, and Calgary-based service centre.
AUTOMATIC TTL
Tired of adjusting settings in tough lighting conditions? Then let the AD600 Pro do it automatically for you. Set it to TLL mode and fire away with perfect exposures in any lighting condition. Weddings, party's, or outdoors, TTL is a lifesaver.
BATTERY POWERED
The advanced lithium battery made by Panasonic is designed for performance. It will recycle 600w/s in 0.9 seconds. The AD600 Pro will give you 350 full power shots.
STROBEPRO X SERIES WIRELESS
One controller to rule them all. With its built-in receiver, all you need is a radio controller for remote power control up to 300 feet away.
2-YEAR STROBEPRO WARRANTY
Ever had a problem with something you've bought online overseas? Good luck getting that fixed. We're a Canadian company with a Canadian warranty, right here in Calgary. When you buy from Strobepro, your AD600 Pro is backed by our Strobepro 2-year warranty.
9 STOP POWER RANGE
Dialling down all the way to 1/256 power allows you to shoot wide open with even your fastest glass. 600 watts of power on the other end allows you to overpower the sun, even at midday. From babies to fast action outdoor sports, you're covered.
HSS (HIGH SPEED SYNC)
The AD600 Pro supports HSS, allowing you to unlock your whole shutter speed range where you'd otherwise be limited to your flash sync speed. This is typically used to bring down ambient light when shooting with fast apertures, but it can also be used to freeze fast action in competing light.
STABLE COLOUR
The AD600 Pro is dead accurate across the entire power range with a variance of just +/-75K with the colour stability mode enabled.
LED MODELLING LAMP
The new 38W LED modelling lamp is the brightest LED we've ever had in a strobe.
FITS ALL MODIFIERS
The AD600 Pro fits all Strobepro and Bowens modifiers.
Cannot thank you enough for this video. I've been trying to figure out how it mounts and how it tilts for the longest time. Off camera flash is something I've been slowly trying to learn. This was soooo very helpful. Thank you thank you thank you!!!
Glad you found the video helpful! Feel free to reach out to us if you ever have questions.
Exactly the video I am looking for. I just got mine yesterday and now I will set it up, thanks for the video! Very informative.
Thank sir for such an informative video. This was absolutely perfect!
Great video! Took me a long time to find a simple but yet very informative video thank you! 👌🏼
love best vid on the 600 I have seen on TH-cam!! Thank you.
woow you such a great teacher , i got mine and am confused what softbox/difuser can give me best results
Price and does it comes with the remote?
Is this compatible with the Godox Witstro AD-H600 portable? or is there another version of that? Pins look different...
No they are not compatible. You need this extension head for the Pro version. strobepro.com/products/strobepro-x600-pro-godox-ad600-pro-extension-head
My flash keeps switching from manual mode to multi mode ? Any idea why
Is your controller set to multi mode? The controller will always override what is set on the flash.
Thank you.
Great Video, most helpful and informative - I'm new to this end of photography and was expecting the worst - Yet today, I'm a Smarty Pants . . . Thank you - : )
Thank You! The most informative video ever !
Great Video.
I'm just getting g into the Godox system. I have several Canon 600EX-RTs and I would like to use the XPro to fire them together with the AD600. I need help
After mounting the 600EX-RT on the X1 and the XPro C on the Camera, how do I set this up to make me use both AB600 and 600EX-RT be fired by the XPro mounted on my Canon Camera.
Manty thanks
Great tutorial. Many thanks!
I have two of these and noticed that when I trigger them they make a strange sound, like a spring vibrating, just after the beep, it does it with both Units, so would not think its a fault, Unit s both seem to perform OK, but I have used quadra kits and Broncolor Siros none of these make the strange sound, would you have any idea what it is.
Will that be compatible with my Yashica Electro 35, thanks in advance?
Your friendly neighborhood Spider-Man!
So at roughly 24:53....when you turn on the trigger, I see SYNC on the bottom of window.....I don’t see that on my trigger....it’s always blank....any reason why? Thank you...
So you have your controller updated to the latest version?
This is the most comprehensive and easy to understand vid I've seen so far on the GodOx 600 Pro. Bought one for these bad boys recently and have been looking for a vid like this! Thanks for sharing!
Is the modeling light bright enough to do a headshot inside a Octabox
Inside a studio environment?
IYou would be pushing it for a headshot in the softbox. f4, 1/100, iso 400.
I'm speaking of the modeling light is that light bright enough inside a sofbox or Octabox to focus?
Yes it’s bright enough to focus for sure.
Can it be shipped to Germany?
hi, Can I link & use this light to trigger Canon Speedlite 600EXII-RT wirelessly? thanks for your help
No the Canon is on a different wireless system. however you can add an XRC receiver to your 600Rt to add it into the system. The XT Pro Canon controller would control both lights then with full TTL and HSS. All lights from Strobepro now have the receivers built in.
strobepro.com/products/strobepro-xt-pro-c-godox-xpro-c-radio-trigger-controller-canon
strobepro.com/products/strobepro-xrc-radio-receiver-canon
Great in depth review on its features.
Is the 2nd curtain synch still limited to 1/30s and lower?? This is a bit of a nuisance for me on my 200, 360 and 600 flashes! Surely Godox could fix this with firmware updates.
It is still maxed at 1/30s. We will have a chat with the engineers to see what the limitation is.
extremely good and helpful review!!!! A+++++
Best Godox video on the internet.
thank you
Great, thanks
Good review, can you get a trigger for the GH4 or 5?
Yes the trigger will work on both these cameras. We have the XT-OP in stock or the new XT Pro-OP will be in by the end of the month. strobepro.com/products/strobepro-xt-op-godox-x1t-o-radio-trigger-controller-olympus-panasonic
How about Pentax systems? K-1 for example. Will your trigger work with Pentax K-1 and what about the high speed sync?
There is no full Pentax support yet. It would still trigger in single pin mode but you would not have HSS or TTL on any of the lights. You would still have power control and firing though.
Will Cactus help in this case? For example, I buy the Fuji trigger and put it on top of my Cactus transceiver...
And another important question here: what about the Elinchrom speedrings? I have 5 amazing and very expensive Elinchrom sorftboxes and still want to use them with Godox AD600pro. Thank you.
No it still won't give you HSS. For your Elinchrom modifiers you can change the speedring to bowens with our 6" speedrings. If those won't fit your boxes just give us an email because we have an adapter for $35. hello @strobepro.com
Well noted! Thx
@vadimyakus In the meantime Pentax support has been added in the form of the XPro-P trigger.
On the multi mode, you said you can set the number of flashes and the Hertz. What does it mean to set the Hertz? Does that control the speed of the flashes?
Yes you can set the Hertz (unit of frequency) of the flash. It basically means how many times something can happen in one second. The higher the Hertz the more flashes you get per second. This has nothing to do with setting your camera to multiburst mode for example and seeing if the flash will keep up. It is how many times the flash will fire in one frame. For example taking a picture of a sequence of movements of a dancer captured all in one shot.
Got it! Thanks for the reply.
Thank you so much! :)
This video was EXTREMELY helpful! THANK YOU!
Nice...
Hi! Did you sell the bag separately?
Yes we do.
strobepro.com/products/strobepro-ultimate-traveller-gear-bag
Shipping anytime soon?
Should be shipping Monday.
Correction: it’s + or - 75 Kelvin’s
Yes, I thought it was assumed but I'll change that next time. I also said modelling lamp instead of flash tube a few times but hopefully it won't bother anyone too much.
I don't think so people will be bothered much by it but for the perception and admiration to the brand and the person it would greatly improve audience influence.
Very Helpful Vid, thanks. I can't get the Canon trigger to mirror the AD600Pro when in TTL, what am I doing wrong?
The display of the strobe will not reflect the exposure compensation in TTL on the LCD screen. It will show on the controller and is actually sending the TTL. Any exposure compensation showing on the the strobe display is cumulative to what shows on the controller. I would recommend keeping the strobe compensation in TTL at 0 and adjust everything from the controller.
fully covered ...Thank you