I've just started a new career within the solar industry, so I'm still getting used to the basic concepts. This video was great and I learned a lot, thank you!
I CANNOT THANK YOU ENOUGH FOR THIS ANALOGY! I have been struggling to understand the difference for weeks at work and this 6mins video made all the difference! :D
This is pretty simple. Whenever you find something labeled in its watts that’s how much power is being used by it per second…so first, you just convert it to Kw to determine it’s usage. Example: A 300w GPU. Make it Kw, so just move its decimal back by 3 or divide by /1000, whatever’s easier for you. So 300w is .3Kw. That’s .3Kw per second. Then see how many of that is being used in an hour. So that’s one second, that is there’s 3600 seconds in an hour. So multiply that .3Kw by 3600 seconds (1hour). That’s 1,080. So 1.08 KWh. Granted my pc will have more than just the GPU. A one Kw solar panel system could run the GPU for basically ~1hour. A six KW solar system could run it for about ~six hours.
practical help: what is a difference between these two companies 1. Each block is equivalent to 50 kilowatt hours (kWh) of electricity and is available for $4.92 net cost per month. So when you subscribe to two blocks, you’re supporting 100 kWh of solar energy for only $9.84 per month or just 33 cents per day.versus Versus 2. The initial credit rate on your bill will be approximately $0.04 per kilowatt-hour (kWh) and will remain at that level for the first 36 months. Starting with the 37th month of continuous enrollment, the rate will increase 1.5% annually; A 1kw subscription to solar energy will cost less than $8.35 a month** Please help what is the difference between these two offers?
When you turn on a 100 watt bulb in your home it actually consumes 100 watts per seconds but your electric company charges by the hour so that would be 100 watts every hour. When you produce electricity from your PV system that 100 watts bulb would consume it every seconds, so a 100 watts bulb will drain a total of 100 X 3600 ( 3600 seconds in an hour) = 360kwatts in that hour from your batteries.
You said we're pushing electricity into the bulb faster. Is that true? For example if the voltage was the same, but the amps were different. Is it more accurate to say that we're pushing a higher volume of electricity into the 100w bulb?
Fair point. It is not a perfect analogy. The voltage is analogous to how hard we are pushing the electrons, not volume. So slower electrons being pushed hard can be same amount of power As faster electrons being pushed less hard.
So if i have a 1500 watt solar generator why is the batter only rated for 1069 wh instead of 1500. In my mind i could use 1500 watts for one hour. But by this rating itd be less.
@@SolarQuotes Water flowing through a pipe is not even remotely close to flow electricity. Electricity is readily available at the source, the way to increase flow is to increase the load or draw.
@@susandenyme9691 I agree is it far from the perfect analogy. But for the purposes of helping solar and battery buyers visualize the difference between power and energy it is helpful - as many comments here seem to suggest. The intended audience is not engineers or scientists :-)
@@SolarQuotes inaccurate analogies is not the best path. I have worked in instrumentation/Electrical engineering design for quite some time. So many people challenge what is being done simply because they never had it explained properly, do not understand or found something they Googled claiming it is more accurate. There is no need to be engineers or scientists to have it explained properly. None of us where either when attending school
I've just started a new career within the solar industry, so I'm still getting used to the basic concepts. This video was great and I learned a lot, thank you!
I CANNOT THANK YOU ENOUGH FOR THIS ANALOGY! I have been struggling to understand the difference for weeks at work and this 6mins video made all the difference! :D
Same bro
This is pretty simple. Whenever you find something labeled in its watts that’s how much power is being used by it per second…so first, you just convert it to Kw to determine it’s usage. Example: A 300w GPU. Make it Kw, so just move its decimal back by 3 or divide by /1000, whatever’s easier for you. So 300w is .3Kw. That’s .3Kw per second. Then see how many of that is being used in an hour. So that’s one second, that is there’s 3600 seconds in an hour. So multiply that .3Kw by 3600 seconds (1hour). That’s 1,080. So 1.08 KWh. Granted my pc will have more than just the GPU. A one Kw solar panel system could run the GPU for basically ~1hour. A six KW solar system could run it for about ~six hours.
thanks for telling us its per second.i dont think he said that
practical help: what is a difference between these two companies 1. Each block is equivalent to 50 kilowatt hours (kWh) of electricity and is available for $4.92 net cost per month. So when you subscribe to two blocks, you’re supporting 100 kWh of solar energy for only $9.84 per month or just 33 cents per day.versus Versus 2. The initial credit rate on your bill will be approximately $0.04 per kilowatt-hour (kWh) and will remain at that level for the first 36 months. Starting with the 37th month of continuous enrollment, the rate will increase 1.5% annually; A 1kw subscription to solar energy will cost less than $8.35 a month** Please help what is the difference between these two offers?
Amazing explanatory skill this presenter demonstrates. Thank you, helped a lot.
He explains absolutely nothing. He even makes blatant confusions. Power is Work not watt over time.
5:35 Simple Summary of everything
20w vs 100w: saying faster denotes more pressure: voltage increase. This is incorrect, or course. You might say its a wider/bigger (waterfall).
A very clear explanation - much appreciated 👍
A very good explanation that is easily understood by anyone. Thanks.
You are the best at simplifying this made it simpler
Yes! People get confused. FYI, here's how we explain w v. wh, on the road to explaining our newly minted metric, the @ @hZ38 - Go Team Earth!
When you turn on a 100 watt bulb in your home it actually consumes 100 watts per seconds but your electric company charges by the hour so that would be 100 watts every hour. When you produce electricity from your PV system that 100 watts bulb would consume it every seconds, so a 100 watts bulb will drain a total of 100 X 3600 ( 3600 seconds in an hour) = 360kwatts in that hour from your batteries.
Pretty cool examples I appreciate this method of teaching
Very well explained 👍
Perfect explanation 🌞thanks!
You said we're pushing electricity into the bulb faster. Is that true? For example if the voltage was the same, but the amps were different. Is it more accurate to say that we're pushing a higher volume of electricity into the 100w bulb?
Fair point. It is not a perfect analogy. The voltage is analogous to how hard we are pushing the electrons, not volume. So slower electrons being pushed hard can be same amount of power As faster electrons being pushed less hard.
Thank you very much for explaining this
Something I was looking for!
Cheers mate, I think I'm finally getting it
thanks, i think you should also add the conversion factor at the end....kW to kWh is 3600
still dont get it 100% -that solar graph was confusing - 6kW system measuring kW to add up to 24kWh per day??
Thank You, just the perfect explanation I needed
A very helpful video, thanks.
So if i have a 1500 watt solar generator why is the batter only rated for 1069 wh instead of 1500. In my mind i could use 1500 watts for one hour. But by this rating itd be less.
i love you guys for this
Good Example all the way
Very informative, thank you 🇸🇦
You can make a resonance destruction machine by talking a little more louder than now
Perfect explanation
thank you for the informative video
Sent here by comment on Sailing Uma
So watt about volts? Where do they fit in?
Think of Volts as electrical pressure. Volts X current = power
So how many kwh will 6kw solar system produce?
In Australia - multiply kWp by 4 to get average daily energy. So 6 kW will produce 24kWh on an average day. Less in Hobart, more in Cairns.
well done.
Very informative video. Greeting from Angola.
Best explanation heard
Thank you so much 🙂
Thank youuuuuuuu... Interesting..
Thanks 😃
It's still confusing. Because I am dumb
🔥🔥🔥
got it.
the sound is not good I am quite disappointed
I m a technical advisor
Hi
Efren Highway
That is so so inaccurate.
Hi Susan - what is?
@@SolarQuotes Water flowing through a pipe is not even remotely close to flow electricity. Electricity is readily available at the source, the way to increase flow is to increase the load or draw.
@@susandenyme9691 I agree is it far from the perfect analogy. But for the purposes of helping solar and battery buyers visualize the difference between power and energy it is helpful - as many comments here seem to suggest. The intended audience is not engineers or scientists :-)
@@SolarQuotes inaccurate analogies is not the best path. I have worked in instrumentation/Electrical engineering design for quite some time. So many people challenge what is being done simply because they never had it explained properly, do not understand or found something they Googled claiming it is more accurate. There is no need to be engineers or scientists to have it explained properly. None of us where either when attending school
@@susandenyme9691 You must be fun at parties🤣