Product doesn't make any sense for most people. Anker Soli has similar capacity and more outlets and expandable and goes on sale for somewhere around $500. Ryobi's non-18v batteries are rarely on sale. I guess it's handy IF you already have the batteries, but you're going to wear down those expensive ryobi lithium ion cells whereas at least the soli has lifepo4 cells which will do way more cycles.
Power back up if the grid goes down. How well will it run the house furnace, freezer or fridge. I know I keep a fridge in the garage and a box freezer in the furnace room.
No furnace, this is only 120v. Freezer or fridge depends on starting and running wattage, but for the money you're better off with any of the 3 1800w units, or if you're really concerned about backup power, get an ecoflow
@@james2042 I’ve got a 120v gas furnace. The only thing I should have to worry about is the fan and some circuitry. I saw a guy show how to power his with his car battery, but I’ve never been able to do it with any of the inverters I have. Eco flow is awesome, but I’m not there yet.
@@livefreeandtoolon I saw a guy power his furnace with his car battery. Gas furnace with 120v fan, just like mine. I typically keep my batteries in there as well. So far no luck and being able to use them to power the 120v fan and circuits. The wife (ever so ready to jump on a ‘deal’) even bought me a couple of inverters that have both sucked as far as that one simple purpose I asked for. I will say the 6ah 40v allows me to sleep all night with my CPAP!
@olumsezbey "the fan and some circuitry" I'll make this real easy for you. If the unit as a whole is rated for less tha. 1000 continuous and 1800 startup, you could splice in an outlet that you could plug a cord into, just make sure you turn off the breaker first so it doesn't back feed into your panel. If the ratings aren't on the name plate, stick a clamp meter on it and measure that way. I still strongly advise against doing this because it's just downright dangerous and stupid. Get a proper generator/battery and transfer switch, it's safer and works a lot better.
Youve already paid for the batteries and they arent cheap. This inverter expands the utility of that sunk cost. I hope it works with the ZTR mowers though Ryobi only advertises it can be plugged directly into the standard mowers. In any case on the back side of Hurricane Milton i want all the options for backup power i can get
The knockoff tend to be lower ah then advertised. I would look around for OEM batteries on Offerup and Marketplace as people usually sell them second hand.
50 watts for 10 hours is 500 Wh, 10Ah at 80v is 800 Wh. That gives the inverter an abysmal 62.5% efficiency. I've heard the batteries are really 72v if that's true the efficiency only goes to 69%. Most inverters are between 80% and 90% efficient. Whle this is cool it's too inefficient to justify the price for me.
Have you done any math to see how much electricity $ your Ryobi tractor uses recharging in a month of typical use compared to gasoline $ for a comparable gas tractor in a month? I'd be curious to see those results. I'm considering a Ryobi tractor but I worry about my electric bill, perhaps unnecessarily.
Electric motors compared to gasoline engines at the end use level are at worst about 80% efficient compared to a gas engine in the same application. So for a bad electrical device compared to the best gasoline version, you should expect to reduce energy expenditure by at least 60%
I got mine today and it doesn't work with the Zero Turn mowers via the charge port, only the lawn tractors. I have the Z54Li. This is awfully dumb and a huge miss on their part. They should offer the parts to make it work with the zero turn mowers too. Only way I can use it is to pull the 80v batteries out and use them individually with it ugh.
I'm glad I saw your comment, that's nuts that it doesn't work with the zero turn. Why not?? Really loses a lot of utility. I was ready to buy it, but now probably won't unless a crazy deal comes up for it
I am assuming it is because the zero turn uses 40v and 80v batteries while the tractor uses only 80v batteries and this converter needs to use only 80v. Maybe try taking out the 40v batteries and see if it works?
The fact theres no integration into the tractor or zt other than it just plugs into the charge port is sad. The whole 80v platform is just half baked and should of never been made if you ask me. Ego has managed to keep everything on their 56v platform and its doing really well for them. Pretty much everything this could power either needs more watts or already has a better portable solution
Product doesn't make any sense for most people. Anker Soli has similar capacity and more outlets and expandable and goes on sale for somewhere around $500. Ryobi's non-18v batteries are rarely on sale. I guess it's handy IF you already have the batteries, but you're going to wear down those expensive ryobi lithium ion cells whereas at least the soli has lifepo4 cells which will do way more cycles.
$1200 setup to run a fan, sweet.
They make a dual blade 30” 80v walk behind too.
Wish they sold it as tool only since I’ve got the zero turn already
Power back up if the grid goes down. How well will it run the house furnace, freezer or fridge. I know I keep a fridge in the garage and a box freezer in the furnace room.
Depends on the wattage of the device you're trying to power., and that will also determine the run time.
No furnace, this is only 120v. Freezer or fridge depends on starting and running wattage, but for the money you're better off with any of the 3 1800w units, or if you're really concerned about backup power, get an ecoflow
@@james2042 I’ve got a 120v gas furnace. The only thing I should have to worry about is the fan and some circuitry. I saw a guy show how to power his with his car battery, but I’ve never been able to do it with any of the inverters I have. Eco flow is awesome, but I’m not there yet.
@@livefreeandtoolon I saw a guy power his furnace with his car battery. Gas furnace with 120v fan, just like mine. I typically keep my batteries in there as well. So far no luck and being able to use them to power the 120v fan and circuits. The wife (ever so ready to jump on a ‘deal’) even bought me a couple of inverters that have both sucked as far as that one simple purpose I asked for. I will say the 6ah 40v allows me to sleep all night with my CPAP!
@olumsezbey "the fan and some circuitry" I'll make this real easy for you. If the unit as a whole is rated for less tha. 1000 continuous and 1800 startup, you could splice in an outlet that you could plug a cord into, just make sure you turn off the breaker first so it doesn't back feed into your panel. If the ratings aren't on the name plate, stick a clamp meter on it and measure that way.
I still strongly advise against doing this because it's just downright dangerous and stupid. Get a proper generator/battery and transfer switch, it's safer and works a lot better.
If you don't have any of the 80 fold equipment, can you still buy a battery and a charger?
Yup
cost of battery and inverter?
This unit, the inverter is $279. The 80V batteries come with the mowers, but on their own they are $899. You could google this.
@@protonus thanks Protonus!
Youve already paid for the batteries and they arent cheap. This inverter expands the utility of that sunk cost. I hope it works with the ZTR mowers though Ryobi only advertises it can be plugged directly into the standard mowers. In any case on the back side of Hurricane Milton i want all the options for backup power i can get
Can you leave the mounting plate on and put the battery back in the tractor or zero turn? Great presentation as always!
Pricing?
299 I believe
It's $279, not yet available
Is it pure sine wave
Yes
have you ever used any of the 40v or 18v off brand Ryobi batteries they sell on ebay? lots cheaper but i'm not sure how reliable or safe?
The knockoff tend to be lower ah then advertised. I would look around for OEM batteries on Offerup and Marketplace as people usually sell them second hand.
Can the Mega power be used as the Charger of the 1000 watt battery pack?
No this is not a charger.
the biggest question is how long do these things power items. one hour is not much
I stated, 10 hours.....
@@livefreeandtoolon You can lead a horse to water, but......
does it use Lithium Polymer batteries----if not hard pass ----as the recyle usage of using Lithium Ion batteries will kill the batteries quick.
50 watts for 10 hours is 500 Wh, 10Ah at 80v is 800 Wh. That gives the inverter an abysmal 62.5% efficiency. I've heard the batteries are really 72v if that's true the efficiency only goes to 69%. Most inverters are between 80% and 90% efficient. Whle this is cool it's too inefficient to justify the price for me.
Have you done any math to see how much electricity $ your Ryobi tractor uses recharging in a month of typical use compared to gasoline $ for a comparable gas tractor in a month? I'd be curious to see those results. I'm considering a Ryobi tractor but I worry about my electric bill, perhaps unnecessarily.
Electric motors compared to gasoline engines at the end use level are at worst about 80% efficient compared to a gas engine in the same application. So for a bad electrical device compared to the best gasoline version, you should expect to reduce energy expenditure by at least 60%
I got mine today and it doesn't work with the Zero Turn mowers via the charge port, only the lawn tractors. I have the Z54Li. This is awfully dumb and a huge miss on their part. They should offer the parts to make it work with the zero turn mowers too. Only way I can use it is to pull the 80v batteries out and use them individually with it ugh.
I'm glad I saw your comment, that's nuts that it doesn't work with the zero turn. Why not?? Really loses a lot of utility. I was ready to buy it, but now probably won't unless a crazy deal comes up for it
I am assuming it is because the zero turn uses 40v and 80v batteries while the tractor uses only 80v batteries and this converter needs to use only 80v. Maybe try taking out the 40v batteries and see if it works?
The fact theres no integration into the tractor or zt other than it just plugs into the charge port is sad. The whole 80v platform is just half baked and should of never been made if you ask me. Ego has managed to keep everything on their 56v platform and its doing really well for them.
Pretty much everything this could power either needs more watts or already has a better portable solution
If we've seen anything from Ryobi in recent years it's that they're constantly improving and innovating. Expect more soon.