Is this device for water only or does it support liquids with more viscosity and high temperature? I work at a glycerin refinery and we have difficulties with our flowmeter. Would it be appropriate to substitute this model?
@@zimin_ch it only works on pvc pipe..the reading works well flow looks well but the accuracy is far from accurate more than 20% volume but maybe you can fix it,,,,for another pipe material it almost impossible to look for the correct flow number,,,,
@@imamkopi7952 Thanks for the reply, I didn't have any luck testing with pvc inside my house, but I'll be doing some industrial testing this weekend. I'll keep you updated
my ultrasonic flowmeter has no reading with signal strenght of 56.4 and Q of 11, ill try to grind same u did but indicate poor signal strenght could you help me please...
Very informative, 😃, thanks 🎉
hello, ¿Do we can control other devices with the flowmeter i don' know for example a engine of C.A
Sir, if the water rate in the pipe isn't stable (because it's being pushed with a diaphragm pump). Will it affect the measurement process?
For technical measurements with unstable flows, it is better to use ultrasonic flowmeters
Mantap mas
Hola que tal buenas noches quisiera saber cual es la distancia en la que pueden estar los transductores del equipo
th-cam.com/video/PNwdLvhQ4RM/w-d-xo.htmlsi=IGO7-DG40pExKwWd
4:21
Is this device for water only or does it support liquids with more viscosity and high temperature? I work at a glycerin refinery and we have difficulties with our flowmeter. Would it be appropriate to substitute this model?
Great 😂
Hello Cherry Wang... can you guide me, how to choose languange in english model TUF2000B
Can you change the setttingss on Modbus RTU if needed?
Hi, How connect level sensor 4a20mA?
Can use for fuel oil?
We can provide flow meters suitable for fuel oil😜
😢😮i
Input parameter is correct but why the signal still poor???,,,can't normal...and also not detect the fluids
Hi! Did you find out what was wrong? I have the same problem
@@zimin_ch it only works on pvc pipe..the reading works well flow looks well but the accuracy is far from accurate more than 20% volume but maybe you can fix it,,,,for another pipe material it almost impossible to look for the correct flow number,,,,
@@imamkopi7952 Thanks for the reply, I didn't have any luck testing with pvc inside my house, but I'll be doing some industrial testing this weekend. I'll keep you updated
my ultrasonic flowmeter has no reading with signal strenght of 56.4 and Q of 11, ill try to grind same u did but indicate poor signal strenght could you help me please...
my email is simon@tuf-2000.com, pls send your problem to my email, better with photo of your wiring diagram.
I have the same problem, can you help me ?
@@cherrywang9433 can you share your WA number ?
Move clamp little to get good strength signal
Mana hasilnya tida ada
which is the programming language? english or chinese
It can be English.If you need ultrasonic flow meter you can contact me Jenny@ultrasonicn.com
good day because you can not install your software on my pc, I have the tuf-2000-h, I downloaded it from your website but I can not run it
me too
Hi, I have a problem with the transducer spacing. I can't put the distance. It is blocked. And also it's written no signal. Can you help me ?
how to get this meter manual
i need manual
you can reach that manual from our web site adress "aktek.com.tr/product/ultrasonic-flowmeter-calorimeter-tfm2100-ng/" but only its name is TFM2100-NG
what type of cable used?
Hi, How connect level sensor 4a20mA?