Excellent helpful video. I did find one thing incorrect you state that if you hold the power button for a few seconds it turns on the backlight. That's actually press the + button for a couple seconds will turn on the backlight.
Thanks for the informative video, there is one point I am having difficulty with , that is resetting of the ODM. I bought a second hand bike and would like to do a factory reset, - can this be done?
On my version I cannot change speed, plus and minus don’t have any effect, and , changing wheel size only messes up the speed reading but does not get faster or slower. Hand throttle stuck at 3 mph.
What if you have a 48V 21ah extended range battery where it's set for 50km = 32mph, whereas it's limit is 90km. How would I reach it's maximum km/h to get it's maximum speed per hour ?
Hi GM... the "black and white LCD display" is the easiest to see in direct sunlight... the new TFT color displays go invisible in direct sunlight.. I wish Bafang would bring back the black and white LCD, that had all the information the 860c has: ie. Speed, Voltage, Watts, Trip/ODO, power level.. etc.. I ride a recumbent etrike with a BBSHD, and i tow a Solar trailer.. I need Speed:Watts:voltage to optimize the range... You need to be able to monitor the power level:gear ratio in order to get the best range. I have the useless P860c display that i can't see in the direct sunlight. it is useless, you don't ride solar etrikes at night or in the shade..
Hi there a few years late I know but it is about changing the pedal assist. I can get into the advances options and get the opt dH I increase it to from 5 to 9 and press the power button to save. When I turn on again the pedal assist still only goes up to 5 :-( what am I doing wrong? Any help would be appreciated. Thank you
*Hello! I have a front wheel Bafang 500 watts 48 volts.I am powered by a 48 volt battery. My display is not working. When buying a c 965, it worked. In an accident, I broke it and bought a c 850. He doesn't see the battery and the speed. Right now I bought c 961, he writes error 7b. The error code is incorrect voltage..The controller is 22 amps. Please tell me what could be the problem here? How do I solve it? Thanks!*
Hi, friend! Please tell me: there is a parameter "Нr" on my cycle computer - it is adjusted from 1 to 26, what could it mean? Two wheel motors installed. There are two controllers (one per wheel). All parameters are suitable for your video. Only this "Нr" is not known 🤷♂ I apologize for my English)) Google translator helped 🙂 Привет друг! Подскажи пожалуйста: на моём велокомпьютере есть параметр "Нr" - он настраивается от 1 до 26, что бы это могло значить? Установлено два мотор-колеса. Установлено два контроллера(по одному на колесо). Все параметры подходят по твоему видео. Не известен только этот "Нr" 🤷♂ Прошу прощения за мой английски)) гугл переводчик помогал
one more addition..when you press n hold the plus button for display light its thr same to put headlight n tail light on connection 6v provided in bbsd02..I want the contact to fit a kit of side lights and brake light
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
Thank you! I wanted to turn the screen light on but couldn’t find out how and it was dark out so I found this and 100% helped!
Great video, just got one for our Cycling channel. Bafang didn't supply any paper instructions. This was very helpful.
Excellent helpful video. I did find one thing incorrect you state that if you hold the power button for a few seconds it turns on the backlight. That's actually press the + button for a couple seconds will turn on the backlight.
Fantastic video. Clear and precise. Thank you
This video was very helpful! Thanks 😊
yep , like 9 modes . best to get in shape and track how your cardio is doing over time . and also save the battery 🔋🔋🔋
Hi, how I can unblock speed limit. On my Bafang this function is blocked
perfect, thanks for the video. I have a question, how do you change the battery and what type? Thanks for info.
Thanks for the informative video, there is one point I am having difficulty with , that is resetting of the ODM.
I bought a second hand bike and would like to do a factory reset, - can this be done?
Will this display work without connecting to a hall sensor?
Great thanks,what's the one holding on and +. Comes up p must be power !
I can not change my speed in the menu. Do you know how i can reset this?
I have the knaap ams 20x4 inch what would be the b setting for wheel size in setting
On my version I cannot change speed, plus and minus don’t have any effect, and , changing wheel size only messes up the speed reading but does not get faster or slower. Hand throttle stuck at 3 mph.
On my C961 I can use the throttle on pedal assist 0
What if you have a 48V 21ah extended range battery where it's set for 50km = 32mph, whereas it's limit is 90km. How would I reach it's maximum km/h to get it's maximum speed per hour ?
It's fixed to a assist level within the motor controller
Hi GM... the "black and white LCD display" is the easiest to see in direct sunlight... the new TFT color displays go invisible in direct sunlight..
I wish Bafang would bring back the black and white LCD, that had all the information the 860c has: ie. Speed, Voltage, Watts, Trip/ODO, power level.. etc..
I ride a recumbent etrike with a BBSHD, and i tow a Solar trailer.. I need Speed:Watts:voltage to optimize the range... You need to be able to monitor the power level:gear ratio in order to get the best range. I have the useless P860c display that i can't see in the direct sunlight. it is useless, you don't ride solar etrikes at night or in the shade..
Agreed. The C961 and the C965 work better in sunlight
Can you have back light on without headlight on?
How do you turn on the headlight
Thnx!! my bike finaly knows the time! hhhaha :-)
Thank you!
How do you turn on the headlight?
I have a 48V 21ah extended range battery that has the range of 50km - 90km. Is there a way to increase the range to 90km for this type of battery.
Thanks, didn't get the book with it. Only problem with it is no throttle power on 0 if you don't like pedal assist.
Stay tuned we will release a video soon on how to set that up
i have the cp61 and i want to reset the wholw thing because the battery power indicator is stuck on zero
Hi there a few years late I know but it is about changing the pedal assist. I can get into the advances options and get the opt dH I increase it to from 5 to 9 and press the power button to save. When I turn on again the pedal assist still only goes up to 5 :-( what am I doing wrong? Any help would be appreciated. Thank you
*Hello! I have a front wheel Bafang 500 watts 48 volts.I am powered by a 48 volt battery. My display is not working. When buying a c 965, it worked. In an accident, I broke it and bought a c 850. He doesn't see the battery and the speed. Right now I bought c 961, he writes error 7b. The error code is incorrect voltage..The controller is 22 amps. Please tell me what could be the problem here? How do I solve it? Thanks!*
*Hello! TSU me display writes error 7b and turns itself off. What should I do, how can I fix it?*
thank you
Can I use this lcd with my Magic pie 4?
I can’t set up my speed limet
*Hello guys! My display writes error 7b and turns itself off. What should I do, how can I fix it?*
why is he stuck on kmh?
Hi, friend! Please tell me: there is a parameter "Нr" on my cycle computer - it is adjusted from 1 to 26, what could it mean?
Two wheel motors installed.
There are two controllers (one per wheel).
All parameters are suitable for your video. Only this "Нr" is not known 🤷♂
I apologize for my English)) Google translator helped 🙂
Привет друг! Подскажи пожалуйста: на моём велокомпьютере есть параметр "Нr" - он настраивается от 1 до 26, что бы это могло значить?
Установлено два мотор-колеса.
Установлено два контроллера(по одному на колесо).
Все параметры подходят по твоему видео. Не известен только этот "Нr" 🤷♂
Прошу прощения за мой английски)) гугл переводчик помогал
one more addition..when you press n hold the plus button for display light its thr same to put headlight n tail light on connection 6v provided in bbsd02..I want the contact to fit a kit of side lights and brake light
Would be better if you spoke more slowly and enunciated your words