Fuel Ox For the world's best fuel additives, catalyst, and antigel, go to FUELOX.COM use promo code DIYSEMI for 15% off every order! MUDFLAP For some great fuel discounts with out needing to use a fuel card, watch this video...th-cam.com/video/LjB5Y60p1qI/w-d-xo.html Download the Mudflap App onto your phone and use the promo code diysemi when signing up to receive $10 in free fuel
I run a van but still watched for the information. I’m surprised there’s no calibration needed. Good stuff as usual DIY! Hell I even got some useful info out of the comment section concerning airflow to the reefer!!! 👍🏽
Issues with carrier reefer today... unit shit down due to coolant over heating .. fun stuff I tried to add a membership but for some reason I don't have a fancy member ship button
There is a join button by my name. here is a link. hopefully you got that sorted out before you had an issue with the load! sometimes in the high heat if you are parked you need to drop the trailer and pull ahead a few feet so that reefer can get some airflow. usually not a problem when you are moving. Airflow for the reefer units is very important
I just cleaned it out blew off dust checked fluid belts and such ... been working great so far (3 hours). So I have restricted my TH-cam because I have a younger boy. Thinking that's why I do not have a membership button 😜🤨🤣I will figure it out while at a shipper lol
new panel has an update then. you will need to stop by carrier for a software update. Takes about 10 min. must be a newer model panel. It will still run fine until you get this done
@@yellahairdgirl2546 normally you can press the select button until you see settings, in there you can scroll up or down and u will see reset pm hourmeters
@@josephsmart552 ☝🏼 I agree.. it isn't that simple for some reason 😁thankfully it isn't hurting anything and no one loading me has said anything.. I will slow down sooner or later to have it reset:) maybe just get my next PM done at a trailer place 🤩
@@DIYSEMI we have some customers put window tint on theirs and actually had one 5 years old still look like new, if it gets dim you can adjust the contrast on it
Thank you for responding. I can see the numbers clearly but the problem is I have a code error saying display Modular error cause of that you want to start the units
Fuel Ox For the world's best fuel additives, catalyst, and antigel, go to FUELOX.COM
use promo code DIYSEMI for 15% off every order!
MUDFLAP
For some great fuel discounts with out needing to use a fuel card, watch this video...th-cam.com/video/LjB5Y60p1qI/w-d-xo.html
Download the Mudflap App onto your phone and use the promo code diysemi when signing up to receive $10 in free fuel
I never would have thought to do this myself. Saving money, cha-ching
I run a van but still watched for the information. I’m surprised there’s no calibration needed. Good stuff as usual DIY!
Hell I even got some useful info out of the comment section concerning airflow to the reefer!!! 👍🏽
If the display panel is the same, no update needed...but if it slightly different a software update may be needed. In this case, it's the same
I have no mechanical fixing skills. But that looks pretty simple that I should be able too change one out.
Sounds like an expensive but necessary and easy fix
I was having the same issue with my display DIY and I just replaced the LCD display. They sell it on eBay for $200. It’s very easy to switch out.
Came here looking for someone that’s done this. Thanks. About to order one.
Make a video please lol
@@YPM209 I know. I should have done a video lol I replace it 2 years ago and still working good 👍
Good to know! Instructions were included im guessing? I just ordered
Model # please
I can watch this kind of stuff all day if I had the time that is.
Or... just buy the LCD for $200 and swap it and save a grand. Easiest fix in the world.
Issues with carrier reefer today... unit shit down due to coolant over heating .. fun stuff I tried to add a membership but for some reason I don't have a fancy member ship button
th-cam.com/channels/5vaUqMbUPixlMniTaDfkBw.htmljoin
There is a join button by my name. here is a link. hopefully you got that sorted out before you had an issue with the load! sometimes in the high heat if you are parked you need to drop the trailer and pull ahead a few feet so that reefer can get some airflow. usually not a problem when you are moving. Airflow for the reefer units is very important
I just cleaned it out blew off dust checked fluid belts and such ... been working great so far (3 hours). So I have restricted my TH-cam because I have a younger boy. Thinking that's why I do not have a membership button 😜🤨🤣I will figure it out while at a shipper lol
It’s the same make and model as your reefer
Thank you. As always very informative
What is the part # for carrier X4 7500?
Great video!
I changed mine and not working properly light solid yellow no codes and not read unit hours
new panel has an update then. you will need to stop by carrier for a software update. Takes about 10 min. must be a newer model panel. It will still run fine until you get this done
I did a PM on my reefer and I was wondering how to reset the p.m. due button or code I mean? Any thoughts?
different for each unit...not sure
apx or advance?
@@josephsmart552 advanced. I used vies given to me and they worked but got stuck on a screen saying it was loading
@@yellahairdgirl2546 normally you can press the select button until you see settings, in there you can scroll up or down and u will see reset pm hourmeters
@@josephsmart552 ☝🏼 I agree.. it isn't that simple for some reason 😁thankfully it isn't hurting anything and no one loading me has said anything.. I will slow down sooner or later to have it reset:) maybe just get my next PM done at a trailer place 🤩
Thanks for sharing
years ago u could get away without adding software, now if you buy the part over the counter and install it you will get an update software alarm
I've had that happen about 50% of the time. these screens don't last anymore, I 've been having them go out a little after a year of being new
@@DIYSEMI we have some customers put window tint on theirs and actually had one 5 years old still look like new, if it gets dim you can adjust the contrast on it
How I can reset engine load calibration
I have that alarm on
Great video
$1200? , That's crazy!
yes it is
could you sell it to me the old Display module?
I'm rebuilding the lcd display. U can get them online for $200
Thank you for responding.
I can see the numbers clearly but the problem is I have a code error saying display Modular error cause of that you want to start the units
#yeahbuddy