Since I want to see more e91 single turbo content I liked, commented and was already subscribed. 👍 Cant wait to see it at full tilt beating Christians single turbo.
As of right now I’m almost done with my e90 V1 project. Just saving up for some bodywork/paint that I plan on getting done Q1 of next year. I’m still fighting some weird noise with some air/vacuum leak that I’m just going to have a shop try and fix at this point. Next step is to go Port Injection and see what these Pure 600’s can do. But when they fail (hopefully the turbos only fail and i don’t blow another N54 lol)I will definitely be going single Turbo Top-mount to switch it up. Mods/Stuff: Fresh N54 swap along with all new seals/maintenance (last one spun a rod bearing) Pure 600’s Stage 3 XHP trans tune (also did trans flush for maintenance) E50 mix custom tune VRSF inlets VRSF outlets VRSF Chargepipe HKS BOV VRSF 7.5 FMIC CFS Radiator AFE stock location intake VRSF Catless Downpipes VRSF street exhaust Fuel it stage 2 bucket less LPFP New OEM HPFP NGK 97506 gapped at .20 New Delphi coils 3.5 bar TMAP VS Map sensor to BOV adapter Oil catch can
Excited to see how the single turbo set up performs. When you do the DCT swap, can you share the details of how to get the shift paddles to work properly?
I just bought this kit and installed it…it’ll last..it’s a solid kit everything fits accordingly just took some time to get it just right..same turbo but a tial 44mm wastegate! Great job man! Hope to see it soon 🙌🏾💪🏾🔥
If I was to go speedtech On a budget ish I think the pulsar “6262g” Garrett g35-900 copy “ would be a good choice and you get a fast spooling twin scroll option capable of 900 hp . I know these kits are good with numbers but The only thing holding me back is the sound the manifold seem to make , it isn’t so good 😢.
@@SwapDepot actually the pulsar g35-900 . With the .85 ar will Probably fall off pretty badly up top huh 😬 not good for roll races etc .. seems like this kit likes a big ar … . I’m excited to see what your 6766 with the t4 open will do and spool like . I know In the Speedtech faq page they have a graph showing the vsr 6766 t4 open .96 ar making 722 @25psi with room to go , which is impressive.
I wish I could get the answer for this comment as I think it would help a lot of people out there! I see that you put a proper 7.5 intercooler into this build as would be expected. Is it possible that the "Duck" sounds and quacking etc that sometimes plagues us N54 folks could be due to the smaller 5 inch IC being used with larger 17t or 19t turbos?? Maybe somehow bottle neck happens and it pushes the boost back into the system or something?? Just stabbing in the dark now. LOL. I know I can't figure out what's going on and that is the one thing I haven't changed out. Although I made sure it wasn't leaking or broken etc. Please help! I can't figure this out and there's NO INFO on it on line anywhere except your video where your one car has it too. Thanks for all your great hard work!!
I decided just to go 2jz swap on my e92 335 2jzs been my dream engine as a kid and n54 is just too much work to make 1k hp rather spend money on my dream engine and sell my n54
Waiting on an upload to decide if I should also cop the 6766 from VS racing. Please update us on the power it was able to put down even if it's a 1min clip
Bums me out no one has done a new coil pack harness b58 style on the cool side that goes over the top of the valve cover. I would live with that to not cook the wires as they seem so damn close to the turbski.
Hey bro any idea why it seems to always be the front turbo on this platform? I am doing turbos on my 08 335xi now and... front turbo seals lol. Only thing I can think of is the downpipe is longer for the front, maybe it puts too much stress on it with shit flow? Even "3 inch" downpipes neck down to just barely 2 inches on my xi. I wonder how much power a full dual 3 inch would pick up?
I was hoping you guys would probably be able to help me out with something I have a 1:35i BMW M54 and I changed the coils I changed all the injectors I changed all the spark plugs and I'm still throwing a misfire code and cylinders 1 2 3 any suggestions on what it could be
Misfire as how? Lean/rich condition? Rough idle? Check. Your dme connection and make sure there is no oil on the dme side connectors. Yes! Oil can travel up to the dme.
@@SwapDepot it is brand new. It has just been out of the box collecting dust for a few years now. I’m asking $1200 with a .82 a/r v band turbine housing or .82 a/r open t4 turbine housing. I’d let it go for $1000 without a turbine housing. I used it for mock up when I was going to turbo my e36 like 3-4 years ago but I didn’t go through with that build. I was saving it for my 335i, but in typical n54 fashion, I blew up my engine so now I’m trying to liquidate my spare car parts to get a decent used engine. I also have a used g30 900. I definitely think I’m more emotionally invested into the idea of a g30 900 on an n54 and I don’t want to let go of it but everything has a price at this point in time.
@@SwapDepot Thanks, love the content. Building my own N54 for grip and slip thanks in part to you, Christian and the rest of the BMW youtube community.
I know you installed the after market oil cooler because you didn’t have one, but does the stock oil cooler hold up on a single turbo build? or is getting an upgraded one needed? love the build btw!
Not sure what the point of this video is.. you skip the bits that are tricky, which are the bits that people want to see how to do so they can do it themselves.
This kit is nothing special. They dint have complete piping going into the intake manifold. On3 has an even more complete kit for cheaper. & they've been out since 2015..
Installed multiple kits from different brands in past, always have to do some bs modifications, speedtech was the first that i worked with that went on no problems and the nuts on the manifold can actually be tightened
Check engine light is just in time for the holidays 🎄 🎄🎄
deff beginning to look like Christmas 😂😂
😢
“Other TH-camrs” THIS IS THE NEW TURBO KIT 🎉 we are installing it next video…..
“Swap Depot” HERES THE NEW KIT WE ARE INSTALLING IT RIGHT TF NOW
I’m hype, single turbo wagon will be dope
Since I want to see more e91 single turbo content I liked, commented and was already subscribed. 👍 Cant wait to see it at full tilt beating Christians single turbo.
Good luck fellas. I think the saying goes: cheap, reliable, fast choose two?
You mean one right 😂
@@lgthegoat8107 🤣
Y’all know better than me. Ill sit back and enjoy the show though.
Finally a ST N54 wagon is making its come back!!!
As of right now I’m almost done with my e90 V1 project. Just saving up for some bodywork/paint that I plan on getting done Q1 of next year. I’m still fighting some weird noise with some air/vacuum leak that I’m just going to have a shop try and fix at this point.
Next step is to go Port Injection and see what these Pure 600’s can do. But when they fail (hopefully the turbos only fail and i don’t blow another N54 lol)I will definitely be going single Turbo Top-mount to switch it up.
Mods/Stuff:
Fresh N54 swap along with all new seals/maintenance (last one spun a rod bearing)
Pure 600’s
Stage 3 XHP trans tune (also did trans flush for maintenance)
E50 mix custom tune
VRSF inlets
VRSF outlets
VRSF Chargepipe
HKS BOV
VRSF 7.5 FMIC
CFS Radiator
AFE stock location intake
VRSF Catless Downpipes
VRSF street exhaust
Fuel it stage 2 bucket less LPFP
New OEM HPFP
NGK 97506 gapped at .20
New Delphi coils
3.5 bar TMAP
VS Map sensor to BOV adapter
Oil catch can
Excited to see how the single turbo set up performs. When you do the DCT swap, can you share the details of how to get the shift paddles to work properly?
I just bought this kit and installed it…it’ll last..it’s a solid kit everything fits accordingly just took some time to get it just right..same turbo but a tial 44mm wastegate! Great job man! Hope to see it soon 🙌🏾💪🏾🔥
How much for the kit
this is the sickest n54 ever, I'd sell a kidney for this car
Bro
If I was to go speedtech On a budget ish I think the pulsar “6262g” Garrett g35-900 copy “ would be a good choice and you get a fast spooling twin scroll option capable of 900 hp . I know these kits are good with numbers but The only thing holding me back is the sound the manifold seem to make , it isn’t so good 😢.
Proper exhaust and youll be good, pulsar turbo should do fine
@@SwapDepot actually the pulsar g35-900 . With the .85 ar will Probably fall off pretty badly up top huh 😬 not good for roll races etc .. seems like this kit likes a big ar … . I’m excited to see what your 6766 with the t4 open will do and spool like . I know In the Speedtech faq page they have a graph showing the vsr 6766 t4 open .96 ar making 722 @25psi with room to go , which is impressive.
I wish I could get the answer for this comment as I think it would help a lot of people out there! I see that you put a proper 7.5 intercooler into this build as would be expected. Is it possible that the "Duck" sounds and quacking etc that sometimes plagues us N54 folks could be due to the smaller 5 inch IC being used with larger 17t or 19t turbos?? Maybe somehow bottle neck happens and it pushes the boost back into the system or something?? Just stabbing in the dark now. LOL. I know I can't figure out what's going on and that is the one thing I haven't changed out. Although I made sure it wasn't leaking or broken etc. Please help! I can't figure this out and there's NO INFO on it on line anywhere except your video where your one car has it too. Thanks for all your great hard work!!
No 5 or 7.5 inch doesnt matter, my car was making that noise because my outlets had a leak at the turbo connection
@@SwapDepot Thank you for that info!!! I'm so glad you told me that as I hadn't even thought about the outlet.
I decided just to go 2jz swap on my e92 335 2jzs been my dream engine as a kid and n54 is just too much work to make 1k hp rather spend money on my dream engine and sell my n54
14:50 what tools 😂 I’m fight for my life out here
I got vsracing both turbo and wg ... no issues at 20lbs
How long have you been running it??
@@99sitrrz 10 months now
In your opinion, Is the VSR worth it instead of PT?
@@S1CkmAde for the money it is
What lb spring you got in your vsracing wastegate?
Could you give me an update on the turbo you got? Was it worth buying?
BIG UP THE E91 MASSIVE!
After having it for a while do you still like this kit and turbo? I'm thinking about the same one
We still here Mr A single big turbo lee
How did everything go with us? Still running good? Were you able to keep ac with us?
Would this work with the e60 535i platform?
Yes, slight modifications are required, ac line and brake booster to be exact
Waiting day by day for next video ❤
Dct will be awesome
Made over 1000whp on a vsracing turbo.
Waiting on an upload to decide if I should also cop the 6766 from VS racing. Please update us on the power it was able to put down even if it's a 1min clip
I hit a torque limit with my trans, gonna be doing a manual swap and then continue to tune
@@SwapDepot how much torque was the limit?
I’m Excited to see the outcome of this setup! . I want to hear the sound and see how much power she makes
Hey Bud, All said and done what do you estimate this top mount kit with all needed components to cost? parts only. Thanks!
3k for the kit, fuel setup, 1500-2k, miscellaneous parts around 1500$
Around 6-7k for everything
Vs racing big with real street LS guys . Keep up the fire ass content
Bums me out no one has done a new coil pack harness b58 style on the cool side that goes over the top of the valve cover. I would live with that to not cook the wires as they seem so damn close to the turbski.
JESSSS 👌🏻💪🏻
My only question was how you kept the engine supported without the mount in the way to work on the exhaust side
I have the mac solenoid for with the n54 harness plug nee never used it
How do I install the Mac Solenoid with the n54 plug-in? Help
Hey bro any idea why it seems to always be the front turbo on this platform? I am doing turbos on my 08 335xi now and... front turbo seals lol. Only thing I can think of is the downpipe is longer for the front, maybe it puts too much stress on it with shit flow? Even "3 inch" downpipes neck down to just barely 2 inches on my xi. I wonder how much power a full dual 3 inch would pick up?
Sounds sick man
Hey man I have a 323i and I can’t find out why it doesn’t turn over but it clicks
Finally back
Did you have to connect the stock solenoids back? I’m currently on a doc race that won’t make any boost since it’s been put on the car.
Your tuner supposed to turn off your boost solenoids so it doesnt go into limp mode
WAGON BOY ❤
Jessss🔥🔥
7:05 why do they leak like that? one of my turbos has a leak in the exact same spot.
What is the AR of the 6766 VSRacing Turbo you selected?
Do u think getting DynamicAuto Flow Max turbo would be good? Looking at them over pure600’s rn
Yes, pure600 turbos suck
does it keepac?
Yea
Just did this same kit on my 135 I got some questions for you man how can I get ahold of you?
Ship a kit out for me in cali 😓
jesssss !!! when start up?
Maybe I missed it but did you get the ball bearing or journal bearing turbo ?
Journal bearing
@@SwapDepot how do you think the VSR turbo will last?
Will see 🤷♂️, i know LS guys use them all the time
Do you have a link for that front bumper you have?
Once u si how turbo ?
I was hoping you guys would probably be able to help me out with something I have a 1:35i BMW M54 and I changed the coils I changed all the injectors I changed all the spark plugs and I'm still throwing a misfire code and cylinders 1 2 3 any suggestions on what it could be
Misfire as how? Lean/rich condition? Rough idle? Check. Your dme connection and make sure there is no oil on the dme side connectors. Yes! Oil can travel up to the dme.
Hey guys how can i get in touch with you have some questions about my N55
How do you turn off the rear o2 sensors
Tune
@@SwapDepot and by turning them off, it doesn’t affect anything?
How’s it running bro I’m about to get the same kit
No issues, one of the best kits
How much is the turbo kit
Damn get a camera stabilizer bro.
Any issues here for RHD drive cars you think? Great kit!
Im not sure about that
BMW boys be like need for speed most wanted Jess
If you want a gen 2 gtx3582r, I have one for sale for a killer deal
Whats a killer deal?
@@SwapDepot it is brand new. It has just been out of the box collecting dust for a few years now. I’m asking $1200 with a .82 a/r v band turbine housing or .82 a/r open t4 turbine housing. I’d let it go for $1000 without a turbine housing.
I used it for mock up when I was going to turbo my e36 like 3-4 years ago but I didn’t go through with that build. I was saving it for my 335i, but in typical n54 fashion, I blew up my engine so now I’m trying to liquidate my spare car parts to get a decent used engine.
I also have a used g30 900. I definitely think I’m more emotionally invested into the idea of a g30 900 on an n54 and I don’t want to let go of it but everything has a price at this point in time.
@@KAS470 genuine garrett?
@@icantcomeupwithaname8925 yes sir it is genuine
Why no oil cooler install
Lmao I watch the whole Jawn obviously....good shit
how long did you have the 17t's on for?
Dont know, car had them when i bought it
JESSS!
Did you manage to not drop the subframe or lift the motor?
Dropped subframe but its possible to do it with it in
@@SwapDepot Thanks, love the content. Building my own N54 for grip and slip thanks in part to you, Christian and the rest of the BMW youtube community.
Sheeeiiitt!!!!! ❤❤❤❤
Guy have bmw and he say " Bavarian i hate this brand " Hahahahhahaha 7:52
I know you installed the after market oil cooler because you didn’t have one, but does the stock oil cooler hold up on a single turbo build? or is getting an upgraded one needed? love the build btw!
Stock is fine as well
Jesssssss!!!!!!
Not sure what the point of this video is.. you skip the bits that are tricky, which are the bits that people want to see how to do so they can do it themselves.
Not a diy video
This kit is nothing special. They dint have complete piping going into the intake manifold. On3 has an even more complete kit for cheaper. & they've been out since 2015..
On3 also fits like shit so hard pass on that
@@SwapDepot how'd u know that? Some seemed to say it wasn't terrible
Installed multiple kits from different brands in past, always have to do some bs modifications, speedtech was the first that i worked with that went on no problems and the nuts on the manifold can actually be tightened
@@SwapDepot interesting 🤔