I have the supco umbrella as well & it comes in handy rain or shine. Especially when the sun is beating down during the hot summers in South Carolina as you know Ted. Love seeing a new Ted Cook video 👍🔧
Great videos👍🏽 Love that umbrella. Doesn’t catch everything cuz the size but definitely helps! Sometimes I’ve found the compressor was drawing close to RLA and found the cap was dead but still running. Or cap is bad, replace and it doesn’t change amps, And I’ve found them read ok and fluid was leaking, sometimes I’m just like 🤯🤷🏽♀️
Love that supco umbrella! It does make nervous to see feet in a puddle in the rain, but I know that Ted takes the necessary precautions. I keep an inexpensive patio umbrella near my 2 condenser units for relief from the hot AZ summer 🌞.
Nice work as usual, even with the popcorn machine in the background! Like your line, "I'm not usually a chicken" Priceless. from someone who touches run caps with his fingers!
Dielectric grease for electrical connections to prevent oxidation, electrolysis, and crustiness. Never-seize/anti-seize on fan shafts and stuff to prevent rusting and corrosion so they are much easier to remove the next time. One thing I saw that would make an electrician cringe is the lack of a grommet where the electrical wires passed through the metal housing.
My father uses a battery powered leaf blower while the top cage is off to get the leafs out and a ball of gaffers tape on some pvc for sticks. Seems to work well for him
After a few videos watched on Anti DIY HVAC, I have brand new capacitors for the condensing unit and blower fan in the attic in stock and ready just in case. 33 years and both capacitors are still working on our Amana HVAC. Apparently, the industry made good capacitors the older they were made ! Many say these days you should expect a new one every 5 years. In any regard, we're ready for the most inconvenient time of the year that one fails. 5 units on that house is awesome...Initial cost is higher but its very cool to be able to use just one or two or all 5 alternating "as needed" vs. a couple of 5 ton energy hogs flipping on and off multiple times a day, if I'm correct on that. Last time I looked, the 5 ton vs. 4 ton used much more power. Much more than a 3 ton vs a 4 ton which told me to use a 3 ton with a 2 or 3 ton, not a 5 ton due to the operation cost. This is a good video...its nice to come across a homeowner who wanted OEM parts. It's still Vietnam made but at least it fit like a glove as the original. 600 amps to power up that home? Oh my, 200 of that is likely for just the 5 A/C when they are all running at the same time ! Hope the electric rates are low, like 4 or 6 cents a kWh.
The supco umbrella is arguably the best hvac tool I've bought in my nearly 20yrs in the biz. Never mind the rain, those black rubber roofs on a 90 degree sunny day
Hi nothing beats anOEM,replacement, glad the rain was not on that motor replacement, I’ll see if I can find that foaming penetrant, JACK of ALLTRADES, STAY WELL,🇺🇸🇺🇸🇺🇸🇺🇸
I really enjoyed how you tried to distract from the fact that you were never intending to find the vibration noise by talking about cleaning the leaves out for several minutes! Great work.
Gave me a good chuckle when you said “I really wanted to eat that!” 😂 Why do they put that label on the package, there’s something wrong with you if you wanna eat desiccant…just saying lol. Once again great job Ted!
Yea... I go to all the training except for the the sales related and "coaching" type. Not really sure who teaches those.... I have found the technical classes very helpful. David and Kevin are really very good at training, as well as tech support.
Paul Blart, Mall Cop..... Love the movie references. I have the Supco umbrella. Left it stuck inside the side of my van and it formed a rust circle under the paint. By the way, we don't do electrical repairs in the rain, company policy. I have been bit many times doing that in the past.
In the Paintless Dent Rem9val industry, we use Get A Grip umbrellas and Mobiletech Shade Umbrellas. They have Woods Suction Cup bases, and they have an 80 inch umbrella option. You cannot beat the 80 inch versus the standard 65 inch.
Hey Ted a friend of mine said he Uses a Doggie pooper scooper to get the Leaves out of condensers mainly the big 5 ton units it might Work pretty good in certain situations.
I was up on a hot roof with a beach umbrella and a Tech from another company was laughing at me. About 1/2 hour later he ask me where I got that Umbrella from. He, He who's laughing now?
If that was my house ,I wouldn't be outside!😅🤣 Thanks for the videos! 🥃🥃🍺🍺🍺🎳⛳ Stay safe. Retired (werk'n)keyboard super tech. Wear your safety glasses!
Could you do a video one day for consumers who want to get some idea of how often to call for service a/c inspection and some idea of what to expect to pay for parts and labor ? Most of us are just a fish on a chopping block waiting to fleeced. There are so many a/c companies with "specials" for seasonal maintenance. It is hard to tell the bad actors from the straight ones- thanks from a follower.
I have one and it's ok if you are replacing a contactor or capacitor but if you take the top off you will not have a stable place to attach. It badly needs a ground pole attachment.
I have this umbrella and works fantastic on residential but never take this on a roof in any kind of wind will snap the plastic legs that hold the umbrella open wish they were metal. All the same great on residential in low windy days.
Couldn’t help but notice you did not try remove the fan blades after removing the lock bolt. Did it really need the jack of all sprays? I’ve remove many fan blades without having to use any rust penetration spray on a fan shaft.
I feel like the writer that wrote the line waterproof shoes and baggies on my socks was from the Midwest because that's something we all did as kids in the rainy weather
When I saw the thumbnail pic on the video, I thought the problem was that the customer put the umbrella there and it was causing the exhaust air to recirculate reducing the cooling capacity.
![[ไฮไลต์] แบดมินตันหญิง ไท่ ซือ หยิง vs เมย์ รัชนก อินทนนท์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/LUCG0H5qkpQ/mqdefault.jpg)
I like the way you touched the terminals to see if it was charged
I bought that umbrella last summer. I bought it for the units that are directly in the sun. It's a great piece gear to have.
I have the supco umbrella as well & it comes in handy rain or shine. Especially when the sun is beating down during the hot summers in South Carolina as you know Ted. Love seeing a new Ted Cook video 👍🔧
Supco umbrellas great! I'm an installer and use mine all summer and whenever it snows or rains. Best part is all my tools stay dry.
How often does your "capacitor discharge tool" give you a jolt?
Great videos👍🏽 Love that umbrella. Doesn’t catch everything cuz the size but definitely helps! Sometimes I’ve found the compressor was drawing close to RLA and found the cap was dead but still running. Or cap is bad, replace and it doesn’t change amps, And I’ve found them read ok and fluid was leaking, sometimes I’m just like 🤯🤷🏽♀️
Nice diagnosis and work; that is one nice big house, with a wise homeowner.☺
Love that supco umbrella! It does make nervous to see feet in a puddle in the rain, but I know that Ted takes the necessary precautions. I keep an inexpensive patio umbrella near my 2 condenser units for relief from the hot AZ summer 🌞.
Nice work as usual, even with the popcorn machine in the background! Like your line, "I'm not usually a chicken" Priceless. from someone who touches run caps with his fingers!
Dielectric grease for electrical connections to prevent oxidation, electrolysis, and crustiness.
Never-seize/anti-seize on fan shafts and stuff to prevent rusting and corrosion so they are much easier to remove the next time.
One thing I saw that would make an electrician cringe is the lack of a grommet where the electrical wires passed through the metal housing.
That camera angle threading the first couple of nuts back on the motor was awesome. 😎👍
That would be Paul Blart in Mall Cop hahahaha... Funny movie.... Love the vlogs and keep them coming and always watching here in Michigan..Stay safe.
Loved watching Paul Blart.
My father uses a battery powered leaf blower while the top cage is off to get the leafs out and a ball of gaffers tape on some pvc for sticks. Seems to work well for him
After a few videos watched on Anti DIY HVAC, I have brand new capacitors for the condensing unit and blower fan in the attic in stock and ready just in case. 33 years and both capacitors are still working on our Amana HVAC. Apparently, the industry made good capacitors the older they were made ! Many say these days you should expect a new one every 5 years. In any regard, we're ready for the most inconvenient time of the year that one fails.
5 units on that house is awesome...Initial cost is higher but its very cool to be able to use just one or two or all 5 alternating "as needed" vs. a couple of 5 ton energy hogs flipping on and off multiple times a day, if I'm correct on that. Last time I looked, the 5 ton vs. 4 ton used much more power. Much more than a 3 ton vs a 4 ton which told me to use a 3 ton with a 2 or 3 ton, not a 5 ton due to the operation cost.
This is a good video...its nice to come across a homeowner who wanted OEM parts. It's still Vietnam made but at least it fit like a glove as the original. 600 amps to power up that home? Oh my, 200 of that is likely for just the 5 A/C when they are all running at the same time ! Hope the electric rates are low, like 4 or 6 cents a kWh.
Been installing for 4 years honestly can't belive I still havnt bought one of these. Ordering it now.
The supco umbrella is arguably the best hvac tool I've bought in my nearly 20yrs in the biz. Never mind the rain, those black rubber roofs on a 90 degree sunny day
Hi nothing beats anOEM,replacement, glad the rain was not on that motor replacement, I’ll see if I can find that foaming penetrant, JACK of ALLTRADES, STAY WELL,🇺🇸🇺🇸🇺🇸🇺🇸
Flyby what is OEM ?
“Jack of all Sprays” Amazon
@@eddenoy321 Original Equipment Manufacturer.
Supco has been around for years, I have used cardboard from a recent condenser installation, a trash can lid and scrap plywood I'm jealous.
You need a head mounted camera so you can have both hands, freedom is spectacular!
Great work. Can’t wait to see the follow up service if possible
Thanks for sharing the video in the rain !
Just got that umbrella, Supco Tradefox last week. I always tight-loose-tight on set screws.
You got a smart customer. OE is the way to go most of the time. Thanks for bringing us along.
Derpy what is OE ????
@@eddenoy321 original equipment
I really enjoyed how you tried to distract from the fact that you were never intending to find the vibration noise by talking about cleaning the leaves out for several minutes! Great work.
Love mine! It’s broken in a few places but still kicks ass 😂
Gave me a good chuckle when you said “I really wanted to eat that!” 😂 Why do they put that label on the package, there’s something wrong with you if you wanna eat desiccant…just saying lol. Once again great job Ted!
Well, if you don't have a SupCo umbrella and you're drenched perhaps eating a few desiccant packages will dry ya out!
They should mark, build, and position things better so professionals like you can more easily service it in the future.
Hey Ted,
lovin the videos. Was in Mauldin today at the Trane warehouse for some boot camp training. Keep the videos coming!
Yea... I go to all the training except for the the sales related and "coaching" type. Not really sure who teaches those....
I have found the technical classes very helpful. David and Kevin are really very good at training, as well as tech support.
That disconnect and water hazard made me uncomfortable. Stay safe.
Paul Blart, Mall Cop..... Love the movie references. I have the Supco umbrella. Left it stuck inside the side of my van and it formed a rust circle under the paint. By the way, we don't do electrical repairs in the rain, company policy. I have been bit many times doing that in the past.
Yea I have 2 of those umbrellas.. They work great
Enjoying your videos from st lucia 🇱🇨 Ted cook
Hate working in the rain----storms yesterday, why is it on beautiful days you work in and bad days you are out in it---Thanks for the videos--Jim
Love the way you test for charge in the capacitor,I do that and I can tell you it still hurts 😢
Good video as always. Will I start seeing Supco products in the adds now rather than Blueon?
Never did like working in the rain and still don't ... Lol ... Good vid ... Thx for posting ...
In the Paintless Dent Rem9val industry, we use Get A Grip umbrellas and Mobiletech Shade Umbrellas. They have Woods Suction Cup bases, and they have an 80 inch umbrella option. You cannot beat the 80 inch versus the standard 65 inch.
On a full service like you were saying is that just cleaning the out door coil? And what do you usually charge for that?
Nice umbrella. Saved my bud several times!👍🏼
Hey Ted a friend of mine said he Uses a Doggie pooper scooper to get the Leaves out of condensers mainly the big 5 ton units it might Work pretty good in certain situations.
Try using your service wrench for the set screws on condenser fan motor and blower motor, instead of the crescent makes life easier!
Supco umbrella 🌂 is a lifesaver on the roof in hot weather. 🔥
It's been such a drought here in Texas I enjoy listening to the rain.
Having 5 a/c units blew the budget on gutters. Thxs for the vids,!
I was up on a hot roof with a beach umbrella and a Tech from another company was laughing at me. About 1/2 hour later he ask me where I got that Umbrella from. He, He who's laughing now?
The simple 2 way combo drivers have a 5/16 shank, skinny wall to fit those tight clearance starters and cap clamps.
If that was my house ,I wouldn't be outside!😅🤣
Thanks for the videos!
🥃🥃🍺🍺🍺🎳⛳
Stay safe.
Retired (werk'n)keyboard super tech. Wear your safety glasses!
Could you do a video one day for consumers who want to get some idea of how often to call for service a/c inspection and some idea of what to expect to pay for parts and labor ? Most of us are just a fish on a chopping block waiting to fleeced. There are so many a/c companies with "specials" for seasonal maintenance. It is hard to tell the bad actors from the straight ones- thanks from a follower.
How often do you take a shock when touching the cap terminals?
You're a brave individual checking capacitors for charge with your fingers!
Thanks for filming Ted. I know it’s even harder to in the rain
I have one and it's ok if you are replacing a contactor or capacitor but if you take the top off you will not have a stable place to attach. It badly needs a ground pole attachment.
That's how my grandfather died standing in water working on an electrical equipment.
Good morning from Australia !
Damn that’s a nice palace. Just started watching but hoping you can get the prince some AC.
Why put the yellow wire on the supply side of contactor and not on the load side
Those icp units always rattle . thanks for the video
Did I see correctly... did he just "test" that capacitor for charge by quickly running his fingers over it while kneeling on wet ground?
I love the umbrella the only complaint I have is I wish it was taller, sometimes you have to be hunched over to get under it.
Hate working in rain!!! Absolutely hate it!
Just curious- why unmount the a
/c cap before you test it since you pull the wires anyway? Great channel!
Because...
Probably easier to film and show us the capacitor considering the lack of space behind the unit
He prob assumed it was gonna be bad as it usually is like 90% of the time.
Personal preference prolly
We do that so that we can see the values.( numbers )
I install in Alabama.😎
Got four of those umbrellas two for work and two for camping
Hello from the great state of Michigan
I have this umbrella and works fantastic on residential but never take this on a roof in any kind of wind will snap the plastic legs that hold the umbrella open wish they were metal. All the same great on residential in low windy days.
Just a question. Why do you take the cap off of the unit before measuring?
Send some of that rain over here to SoCal it’s been mid 80’s this week and dry 💀
I take it the smaller unit is dunzo?
Ol' Ted was definitely NOT singing in the rain on that one. #GoingAboveAndBeyond
😎👍😎👍😎👍
Somebodys gotta do it.
Why have a meter if you don't use it to check voltage to unit, the pull disconnect and short cap leads. Have you not been nailed from cap discharge.
Nice umbrella ☔👍
Couldn’t help but notice you did not try remove the fan blades after removing the lock bolt. Did it really need the jack of all sprays? I’ve remove many fan blades without having to use any rust penetration spray on a fan shaft.
5 units. Big house. Thanks
One thing I’ve noticed is that you don’t discharge the capacitor before touching the terminals 😬
You must have flunked Electrical Safety 101, working with electricity in the rain.
I feel like the writer that wrote the line waterproof shoes and baggies on my socks was from the Midwest because that's something we all did as kids in the rainy weather
What kind of screwdriver was that at 6:15?
That is the 8 in 1 HVAC Slide drive Multi Bit Screwdriver / Nut Driver by Klein Tools. Model #32596.
I got my first No Cooling call in VA. Payne package HP. Leaked out.
1981 Mommy Dearest was the first utterance of the phrase Ted.
Good job Ted, How's the cat that likes steak?
I like your cap. check while standing in water.
Circuit breakers for units 5 and 6 were likely behind the Return of the Jedi poster when you first walked in the house @ 7:03
Why do I hear the main character’s voice from King of the Hill
It sounds like a nitro funny car idling in your pocket!
Wow! That’s a palace! Too bad that the installation didn’t leave enough service access.
Ted is movin on up. I bet that Contactor was a crusty one two.
How many people looked up Jack of all Sprays on Amazon?
Ahh Paul Blart: Mall Cop, watched it a few weeks ago...
Just looking at the placement of these two units, they're way to close together to work real efficient in the first place.
been raining here in illinois for days. that sound of the rain was too much. im traumatized
👍
What's that tip on your Kleins
Dang, push the contactor in and see what happen.
It’s ok Theodore your not made of sugar, you won’t melt. 👍👍🇨🇦
That fingering across the cap terminals gives me the Willie's. Have you ever crossed a charged device?
Surprised the holes for the fan wires aren't gasketed.
Good post, did they go for some maintenance ?
Dang nice house
When I saw the thumbnail pic on the video, I thought the problem was that the customer put the umbrella there and it was causing the exhaust air to recirculate reducing the cooling capacity.
Three panels! What is this a director or someone
is that a house or an apartment complex!? holy cow that place is absolutely massive
Multi-millionaires.