The mechanic didn't offer this solution. He said I needed a new opener. My sprocket set comes in tomorrow and I will be doing this job myself. Thank you for this information tutorial.
Excellent! Glad my video helped! I always try to make my videos as short as possible without adding any unrelated content. Makes everyone happier! Thanks for watching!
We moved into our house in 2012, and it had this exact garage door opener that was from when the house was built, 1999. Never worked but could hear the motor running. Finally figured I'd watch some videos and found this. Bought parts from Amazon for $15, and did your step by step instructions and now works like a charm! Amazing! You saved me a bunch of money sir. 👏👏👏👏
I had the same situation but my opener was installed in 1988. They had the garage converted into a four family studio. They live in San Francisco so it was used as living space. First time I've tried to use the garage door opener that gear just shattered. Thank you for a very straightforward video and it was only 16 bucks for replacement parts. Snap the fingers delivered from Amazon. Thank you again
Excellent instructions. One suggestion though, please don't use pliers to remove nuts! You'll strip the edges of the nuts and make it difficult to remove them if ever needed. Use two small adjustable wrenches or appropriate sized wrenches.
This video was so well done. Often times I find a video with good directions, but it's way longer than necessary. This was short, sweet and nicely narrated. I'm surprised there's not an advertisement. I'd be happy to watch if it helped the author make a little money. Thanks for posting, just ordered my new gear kit. PS - I think it would be worth adding a note on how to properly set the chain tension. If it's too tight, you might wreck your new gear.
Thank you !!! the same thing happened to me.... I followed your steps and it worked! There's no way I would have been able to figure this out let alone fix it without your clear concise video...again , a huge Thank You!
Cool! I fried mine earlier today. The exact model as you have. I'm going to be trouble shooting the thing next week, when it gets warmer.(De 19/2023) Thanks for the Amazon part number. Saves me the trouble.
I have done this before once but as a reminder I watched this video. One of the best review videos I have watched, very professional, details and the view of the process how you were perform. Very well done, thank you.
Well? I did mine today and it went fine. It wasn't easy but wasn't hard either medium level diy for sure. Im 62 years old so anyone who is mobile can do this. In the process I was able to tweak every thing else. Greese chain, tighten loose bolts, ect....my door was off the ground about a 1/2" when I finished all that was necessary was to turn the down travel screw about a half turn. Rita and I can't thank you enough for this diy video, it saved us 100.00$ of dollars. Than you.
You’re welcome! So glad you guys were able to do the repair yourself! It’s nice when all you have to do is buy the part! Would be very expensive to call a repairman for this! Nice work!
Great tutorial. If I didn’t have big fat hands I would’ve been done much quicker, but that 3rd screw on the sprocket mount was a pain. I looked up 10 different videos and only yours had a thorough and quick step by step that explained it all quickly. Thanks!
You’re welcome! Glad you got your garage door sprocket replaced! I try to make my videos as detailed as possible partly for me in case I have to do this repair again. But also so viewers like you can see exactly what I’m doing. I like to get close ups so it’s like you’re looking at the process through my eyes! Nice work! Thanks for watching!
Hey, excellent video! Well done, with all the necessary details, but without droning on for half an hour. My 23-yr-old Sears just lost its gear 2 days ago, and I wasn't sure if I could do it -- but now I'm confident I can. Thank you!
Excellent! Glad my video was able to give you the confidence to do the gear replacement yourself! It’s not difficult to do. I was a bit intimidated by the chain part but that went ok with no problem. Thanks for watching!
@@digitalcamproducer yes, i did get it done, and it works. mine's a belt, not a chain, but same idea. the belt did give me a little grief, but not too bad, and it's all set now. 🙂
Fantastic tutorial! Fortunately, I was able to manage that tough screw with a ratchet. An unexpected surprise near the end when the inner trolley would not align with outer trolley. But I successfully resolved this issue by adjusting the door arm
Yes! A ratchet is the right tool for that one screw inside the housing. Glad you got everything back up and working again! Nice to be able to do fixes like this yourself! Thanks for watching!
Thanks for the video! It helped a lot in my DIY repairing of the garage opener in which the sprocket shaft totally snapped off 2 days ago. In my Craftsman model, there are two screws that are hard to reach and have to be loosened/tightened by a wrench. Oh man, that took some patience. But now the opener is working properly as it is supposed to be. Still much easier than dissembling all other parts in the opener as instructed in the repair manual coming with the replacement parts.
Great tutorial. It will help when I finally get around to installing the gear assembly I bought a week ago. I have not done the install yet, I have been procrastinating. The third screw access is one royal PITA. Thanks for the video.. I have it dis-assembled and just need to put it back together. My problem was that the chain sprocket sheared off. But $17.89 from Amazon is a lot cheaper than a new garage door opener. It is also easier to replace. Thanks again for the video. A big 👍.
The best video anywhere! I did this 5 years ago and I’m doing it again!! Why does the plastic gear only last so long? Is there an issue with this model???
Dude ! My Craftsman opener Sh#t the bed last week. I was bummed and have been manually opening the door. I discovered the metal gear at the top of the assembly you replaced was broken. Got my book out and it was a part I can order. Looked for a video and found yours. Haven't done the repair yet but I am confident I can fix it. Thank you so much. Subscribed !!
I’m really glad you enjoyed my video! I hope my instructions are clear enough for you to follow along to make your own repair on your garage door opener! Also I really appreciate the donation! It means a lot to me! Thanks for watching!
PERFECT!!! Thank you very much that was super easy! I bought the parts as you listed. I had to change the chain location in the drive sprocket a few times to get door would shut all the way. Since ot slippednpit of timing.
Very Helpful . thank you .. can you let me know the elbow arm tha'ts needed for the craftsman 1/2 HP and a remote switch - both are missing (along with the plastic gears that need to be replaced. )
I didn’t look that deep into the other parts you mentioned. The kit I used did come with the big sprocket and worm gear. But I didn’t replace the worm gear. It’s a more involved task to replace that one. If you’re talking about a remote control that can be found on Amazon. I had one die and replaced it with an aftermarket unit and works perfectly.
@@digitalcamproducergreat video! Do you have one on how to loosen /tighten the chain? I’m trying to find out how much slack is needed for the chain to make sure it’s not loose or too tight. Thanks in advance.
I use a 5/16" ratchet wrench on the one hard to reach bolt. Kobolt makes one with a slightly longer handle. Couple of 1/2" open ended wrenches to loosen/tighten chain. Also lubricate the old plastic worm drive gear and top chain sprocket before installing new assembly.
Those are some good tips you added! I definitely would’ve used a ratchet on the hard to reach screw but luckily I found something at that house that worked without having to drive back home to get my tools! Thanks for watching!
I really appreciate this video and the Amazon link. All was great, with one issue: in the video " the trolley was about an inch away from my vice grip" -- its about 6 inches for me though I could not see my vicegrip slipped. So close, yet so far. I will try to pull the chain feeding into the sprocket tighter so the outgoing part of the chain lengthens where I need it. The door stays open by 6 inches at this point. If anyone can give a comment I'd appreciate it! Happy Springtime!
Ok here's my own reply -- video may be needs to state to tighten the chain from the fixed end when re-sprocketing it. That helped me with the last step. Everything else in this video completely matched my situation, including the difficulty accessing the 5/16" nuts holding down the worn out gear! Thanks
Hey I’m glad you got the trolley situation resolved! Yes I think you’re right. The location of the trolley can be adjusted when reattaching the chain to the sprocket. Lots of things on my mind when doing this repair and shooting video at the same time. But I’m glad you got the repair done! Thanks for watching!
Great tutorial! Have two questions: 1) I can hear motor running sound, but how to test and make yourself sure that motor is still working normally (i,e. wires not partially burned out)? 2) I saw you replaced the upright gear and sprocket. How to be sure the horizontal gear attached to the motor is good such that no need to replaced? Thanks!
nice video ,how and where can i buy a garage opener 4 wired for this sears craftsman model as shown.recently i replaced the gwar successfully but now i need to replace the garage opener needs to be 4 wired, thanks
You’re welcome! So glad you were able to fix your garage door opener yourself! Definitely saves a lot of money. Only have to pay for the parts! Not too difficult to do either!
Low ceiling clearance above garage door opener. I’m able to loosen and disconnect the sprocket but unable to lift it out. Any suggestions on how to get out old sprocket w/o removing the whole unit?
Even though I did the repair I’m not an expert at garage door openers. But you can check your see if the newly installed gear is able to rotate without any friction. Maybe the chain is too tight? Check the motion sensors to see if their LEDs are lit for normal operation. And also check the wires that connect the motion sensors to the garage door motor. One wire might’ve come loose during your repair? Hope you get it figured out!
You saved me a ton of $$$. I'm going to make it seem like it is an afternoon-long, 10-beer project; and then look like a miracle-worker a la Scotty on Star Trek. 🖖
hi, thanks for posting the video. I am in the middle of replacing the sprocket now but I am stuck. I followed all your steps, when inserted the new sprocket in the large gear hit the worm gear and was not able to put it all way down the housing. The worm gear is sticky due to the old gear shaving creased together on the surface of the worm gear but not a lot of them. I am not sure if I need to and how to replace the worm gear. HELP PLEASE! Thanks a bunch!
Sorry the worm gear is giving you trouble. The main sprocket should slide right next to it. Can you rotate the worm gear a bit? It’s probably locked in place. It might be a case of wiggling and rotating the sprocket/worm gear enough to allow it to slip in place. Hope you get it installed without too much trouble!
@digitalcamproducer thanks for your reply. I finally bought a genuine part and put it in without any issue. The problem was that the part I first got was aftermarket.
Because of my husband’s health issues I’ve started doing more DIY repairs around the house. Your video was great, thank you for that! I followed it step by step and it appears to be installed properly. However I haven’t tried it as the chain is seriously sagging. I clamped where the trolley was located, but originally the sprocket holding the chain sheered completely off, leaving the chain hanging. The door opened 1/2 way and quit when I discovered the issue. I had to disengage the door to open it in order to get the car outside. Before engaging the door, like you said, I want to test it. I don’t know if I moved something I shouldn’t have. Will it tighten up or do I need to call a professional?
Update: The line (connected to the chain) was off the pulley at the other end causing the huge sag (it must have been off for a while, causing the original problem); we got that put back on. Before putting on the chain, we hit the button to bring the motor to the down position (some thought to figure that out:) and brought the trolley all the way to the stop before the motor. After loosening the chain to allow it to be put around the sprocket, we tightened the chain so it was 1/2" above the bottom rail (a little sag) per other videos we watched, connected the door and seemed to have fixed the problem. A huge thank you for instructions on a repair done for less than $20! Yes, a lot of time was spent, but I learned and gained confidence. I'll never look at a garage door opener the same again!
I replaced the part, but my chain only moves a foot or so then stops. What did I do wrong? The only difference is my top chain sprocket snapped off vs your inner gear wearing out. Same replacement part tho
My chain was off the top gear so I loosed the tension and put the chain back on. Now it goes a few inches…. And goes tight and snaps back into place without allowing the chain to go further. The underside sprocket etc are engaging fine… could I be having the same problem as Gio Tor? Not sure exactly what is wrong please help! Thanks so much!
What do you do if you replace the sprocket assembly with a new one and now the big white gear and the big worm gear are so tight that the motor can't spin?
Great vid, but why did you not replace the main gear of the motor? It's in the kit. Just an observation but why go back in there again. The main gear off motor is just as old as parts that went out.
You’re welcome! Some of these home repairs can be done yourself easily! Just pay for the parts and that’s it! I always have to try before calling someone because I can save money fixing things myself if I can! Thanks for watching!
I don't understand how paying $100 is scamming you. If your handyman is buying the part and doing the repair, that's not a scam, that's a deal! Even if you buy the part for him to use for the repair... That's still a deal! That same part today is about $40 because I just ordered one. There's some tedious work that needs to be done when doing this even though it's not brain surgery. Anytime something is done for you it costs something. $100 is not a scam at all.
@superdave7241 so I bought the part and I looked up how to fix the motor nut didn't have time to do the work. A local handyman quoted me $50 for the job then came back and said he would only do it for $100. Therefore, I found this video and did it myself.
@@SupaFragolata I got all that and that's not the problem. It's saying that 100.00 was scamming you. Anytime something is done for you it costs something. If you have a car detailing service come to your house to detail your car for you... It costs more than you washing it yourself. They aren't scamming you, they are charging you for their service. I don't no why that's hard to understand... They are charging you for a service they provide and not scamming you. 🤦♂️
@@SupaFragolata Now if he said, he would do the whole thing for 50 or $100 and then said after swearing he knew what it was and showed you what it was, and then minutes later said it's impossible to buy the part and they don't make them anymore and you need a whole new unit and he will charge you $400 or $500 to install it.... That's scamming you
I've been a tight-wad and only purchased the big, white, nylon cogwheel. Does anyone know how to remove the black securing pins that hole it in place on the shaft please?
Yes the replacement of the sprocket on the garage motor is fairly easy to do. The chain adjustment is a little more daunting but not difficult. You definitely save money doing this yourself! Thanks for watching!
Hey There . I think I was reading ,,, you might have to then adjust the UP and DOWN force settings . ( Also TH-cam videos on this ) . But as even a better maintenance step ,, I'd check the rolling and balance of the door ,,, the proceed with the UP / DOWN force adjustments . I always ( and read ) it's best to have a good manual opening door to put less stress on the motor / mechanical parts . Hope this helped a bit .
You can also detach the chain from the sprocket on the top of the garage door opener. Then adjust chain until the connector is as close to the trolley as possible… then reattach the chain to the sprocket. Then as the other commenter said, you can adjust the up/down limit switch on the opener. Only if necessary. Hope this helps!
While you have everything accessed and right in front of you, why don't you check the other bushings for excessive play, wear and binding? It would be an opportune time to lubricate these other bushings even if they don't require replacement. Otherwise, great video. Well done!
There are 2 reasons why this gear was damaged. First: it should be greased once every 2 years. Second: your garage door may be overweighted (unbalanced) you should be able to open it and close it with only one hand. If not, call an expert to readjust (or change) the spring(s) before you reattach the door opener.
I’m not sure what caused the sprocket to strip like that. It had been working no problem then it stopped working. When I looked at the sprocket it was shredded. No choice but to order a replacement.
@@digitalcamproducer ya same happened to me I replaced it .but now the door goes up but when I click it to go down it buzzes and qwits won't go down and the chain around the sprocket is very tight.but the rest of the chain is loose.
Good video, but NOT COMPLETE! If you change the drive gear, you HAVE TO CHANGE THE WORM GEAR TOO! iT SAYS SO RIGHT IN THE PARTS INSTRUCTION GUIDE. Yes, it's a more involved job and requires mechanical skills, but if you don't, you'll be doing this AGAIN sooner!
That’s what I get for not reading the instructions! Maybe I’ll revisit this project and swap out the worm gear. But it’s been 2 years since I replaced the main gear and no problems so far using old worm gear.
I just looked on Amazon and there’s a seller that is selling an aluminum main sprocket and worm gear. If this nylon gear breaks down I’m getting the aluminum one.
I can't thank you enough for posting this clear, concise video for fixing a Craftsman garge door opener. You saved me a couple hundred dollars!
The mechanic didn't offer this solution. He said I needed a new opener. My sprocket set comes in tomorrow and I will be doing this job myself. Thank you for this information tutorial.
FINALLY! A great video on youTube that gets to the point and doesn't blab on for 18 minutes for 2 minutes worth of content. Grrrrreat video!
Excellent! Glad my video helped! I always try to make my videos as short as possible without adding any unrelated content. Makes everyone happier! Thanks for watching!
We moved into our house in 2012, and it had this exact garage door opener that was from when the house was built, 1999. Never worked but could hear the motor running. Finally figured I'd watch some videos and found this. Bought parts from Amazon for $15, and did your step by step instructions and now works like a charm! Amazing! You saved me a bunch of money sir. 👏👏👏👏
Excellent! So glad you got your garage door opener fixed. Such a nice feeling saving money doing it yourself! Nice work! Thanks for watching!
I had the same situation but my opener was installed in 1988. They had the garage converted into a four family studio. They live in San Francisco so it was used as living space. First time I've tried to use the garage door opener that gear just shattered. Thank you for a very straightforward video and it was only 16 bucks for replacement parts. Snap the fingers delivered from Amazon. Thank you again
Excellent instructions. One suggestion though, please don't use pliers to remove nuts! You'll strip the edges of the nuts and make it difficult to remove them if ever needed. Use two small adjustable wrenches or appropriate sized wrenches.
This video was so well done. Often times I find a video with good directions, but it's way longer than necessary. This was short, sweet and nicely narrated. I'm surprised there's not an advertisement. I'd be happy to watch if it helped the author make a little money. Thanks for posting, just ordered my new gear kit. PS - I think it would be worth adding a note on how to properly set the chain tension. If it's too tight, you might wreck your new gear.
Thank you !!! the same thing happened to me.... I followed your steps and it worked! There's no way I would have been able to figure this out let alone fix it without your clear concise video...again , a huge Thank You!
You’re welcome! Glad my instructions were clear enough for you to follow along and make your own repair! Thanks for watching!
Cool! I fried mine earlier today. The exact model as you have.
I'm going to be trouble shooting the thing next week, when it gets warmer.(De 19/2023)
Thanks for the Amazon part number. Saves me the trouble.
Great video. Was able to repair my 20 year old Craftsman garage door opener for less than $20! Thank you!
I have done this before once but as a reminder I watched this video. One of the best review videos I have watched, very professional, details and the view of the process how you were perform. Very well done, thank you.
Well? I did mine today and it went fine. It wasn't easy but wasn't hard either medium level diy for sure. Im 62 years old so anyone who is mobile can do this. In the process I was able to tweak every thing else. Greese chain, tighten loose bolts, ect....my door was off the ground about a 1/2" when I finished all that was necessary was to turn the down travel screw about a half turn. Rita and I can't thank you enough for this diy video, it saved us 100.00$ of dollars. Than you.
You’re welcome! So glad you guys were able to do the repair yourself! It’s nice when all you have to do is buy the part! Would be very expensive to call a repairman for this! Nice work!
Great tutorial. If I didn’t have big fat hands I would’ve been done much quicker, but that 3rd screw on the sprocket mount was a pain. I looked up 10 different videos and only yours had a thorough and quick step by step that explained it all quickly. Thanks!
You’re welcome! Glad you got your garage door sprocket replaced! I try to make my videos as detailed as possible partly for me in case I have to do this repair again. But also so viewers like you can see exactly what I’m doing. I like to get close ups so it’s like you’re looking at the process through my eyes! Nice work! Thanks for watching!
i had a lot time without being able to fix my garage door, trying to make it by myself, after your video i was so satisfied, thank you so much...
You’re welcome! Yeah if you have a gear that needs to be replaced my video should be able to help you out.
Thank you for this video. I was able to fix my opener for less than $20 thanks to your excellent instruction. Much appreciated!
You’re welcome! So glad you were able to fix your garage door opener! Really nice when you only have to pay for the part! Thanks for watching!
Hey, excellent video! Well done, with all the necessary details, but without droning on for half an hour. My 23-yr-old Sears just lost its gear 2 days ago, and I wasn't sure if I could do it -- but now I'm confident I can. Thank you!
Excellent! Glad my video was able to give you the confidence to do the gear replacement yourself! It’s not difficult to do. I was a bit intimidated by the chain part but that went ok with no problem. Thanks for watching!
@@digitalcamproducer yes, i did get it done, and it works. mine's a belt, not a chain, but same idea. the belt did give me a little grief, but not too bad, and it's all set now. 🙂
All I can say is WOW! And thank you for sharing! Very helpful and instructions were spot on! Much appreciated!
Fantastic tutorial! Fortunately, I was able to manage that tough screw with a ratchet. An unexpected surprise near the end when the inner trolley would not align with outer trolley. But I successfully resolved this issue by adjusting the door arm
Yes! A ratchet is the right tool for that one screw inside the housing. Glad you got everything back up and working again! Nice to be able to do fixes like this yourself! Thanks for watching!
This was so easy to follow! Thank you so much!! My door is back in operation!!
Thanks for the video! It helped a lot in my DIY repairing of the garage opener in which the sprocket shaft totally snapped off 2 days ago. In my Craftsman model, there are two screws that are hard to reach and have to be loosened/tightened by a wrench. Oh man, that took some patience. But now the opener is working properly as it is supposed to be. Still much easier than dissembling all other parts in the opener as instructed in the repair manual coming with the replacement parts.
Absolutely the best tutorial for replacing. Easy to understand and follow.
That Caddy though!!! Great video!
Yes! My dad’s 1977 Coupe De Ville. Still drives it today! Thanks for watching!
Wow! Saw this after I had my garage door fixed … could have done this! … next time.
Thanks for an awesome tutorial.
Yeah it’s not too difficult to do! At least next time you’ll know how to replace the gear yourself! Thanks for watching!
Great tutorial. It will help when I finally get around to installing the gear assembly I bought a week ago. I have not done the install yet, I have been procrastinating. The third screw access is one royal PITA. Thanks for the video.. I have it dis-assembled and just need to put it back together. My problem was that the chain sprocket sheared off. But $17.89 from Amazon is a lot cheaper than a new garage door opener. It is also easier to replace. Thanks again for the video. A big 👍.
Best explained video of this that I've seen. Great job and thank you! Helped me out a ton.
You’re welcome! Really glad my tutorial was helpful!
I've had the parts for a year but didn't know exactly how it went together, now I'm confident it'll be fixed tomorrow!
Excellent! You’ve got the parts and now you have an instruction video. Yes! Your garage door opener will be fixed soon! Thanks for watching!
@@digitalcamproducer it's fixed!
Absolutely the best tutorial for replacing. Thank you so much !!!
You’re welcome! So glad my tutorial helped! Thanks for watching!
Why does the plastic gear keep going out please 😢
Thanks for this! It saved me about $1000! Took me wayyyyyy longer than you but worth it.
Thanks for for this video. My nylon gears did not wear out, but the sprocket snapped off the chain shaft. Still waiting for my part to come in.
This is exactly what happened to me just now. I'll try this repair bc the opener itself is good quality and lasted 20 years already.
The best video anywhere! I did this 5 years ago and I’m doing it again!! Why does the plastic gear only last so long? Is there an issue with this model???
Thank you. Just what I needed. Repair was straightforward with your instructions.
Excellent! Glad you were able to change the gear in your garage door opener! Nice work!
Dude ! My Craftsman opener Sh#t the bed last week. I was bummed and have been manually opening the door. I discovered the metal gear at the top of the assembly you replaced was broken. Got my book out and it was a part I can order. Looked for a video and found yours. Haven't done the repair yet but I am confident I can fix it. Thank you so much. Subscribed !!
Excellent! I have confidence that you will be able to replace the gear on your garage door opener. It’s pretty simple to do with the gear kit.
@@digitalcamproducer Yes I did the removal of the gear assembly right after watching your video. Just waiting a couple of days for the parts. 👍
Great video. Thank you. I am going to replace the gear system myself now. It's making such a racket at this time. Thank you again.
You’re welcome! Glad my garage door gear replacement tutorial helped!
Perfect tysm!! Also, if you’re door isn’t closing all the way there is a screw you can twist to adjust the travel so that the door closes all the way.
Helped a lot. Just a little more work for me as my opener was flush with the ceiling.
perfect video...thank so much, just ordered the part to do our's. We had our liftmaster installed in 1998-2000, so the part should fit.
Excellent video in all ways! Bravo and Thanks!
You’re welcome! Glad you enjoyed my garage opener repair tutorial!
Thanks! Great Video.. will be using this as a guide for my own repair.
I’m really glad you enjoyed my video! I hope my instructions are clear enough for you to follow along to make your own repair on your garage door opener! Also I really appreciate the donation! It means a lot to me! Thanks for watching!
PERFECT!!! Thank you very much that was super easy! I bought the parts as you listed. I had to change the chain location in the drive sprocket a few times to get door would shut all the way. Since ot slippednpit of timing.
Very Helpful . thank you .. can you let me know the elbow arm tha'ts needed for the craftsman 1/2 HP and a remote switch - both are missing (along with the plastic gears that need to be replaced. )
I didn’t look that deep into the other parts you mentioned. The kit I used did come with the big sprocket and worm gear. But I didn’t replace the worm gear. It’s a more involved task to replace that one. If you’re talking about a remote control that can be found on Amazon. I had one die and replaced it with an aftermarket unit and works perfectly.
@@digitalcamproducergreat video! Do you have one on how to loosen /tighten the chain? I’m trying to find out how much slack is needed for the chain to make sure it’s not loose or too tight. Thanks in advance.
Thanks Man I was able to do this for my parents prob saved them hundreds. Thanks again man hope your doing well 💪🏾
Glad I could help! And nice that you saved your parents a bunch of money by doing it yourself!
I use a 5/16" ratchet wrench on the one hard to reach bolt. Kobolt makes one with a slightly longer handle. Couple of 1/2" open ended wrenches to loosen/tighten chain. Also lubricate the old plastic worm drive gear and top chain sprocket before installing new assembly.
Those are some good tips you added! I definitely would’ve used a ratchet on the hard to reach screw but luckily I found something at that house that worked without having to drive back home to get my tools! Thanks for watching!
What a great tutorial. Can’t thank you enough.
New subscriber!
You’re welcome! Glad my garage motor gear replacement tutorial was helpful! And thanks for subscribing! I really appreciate it!
I really appreciate this video and the Amazon link. All was great, with one issue: in the video " the trolley was about an inch away from my vice grip" -- its about 6 inches for me though I could not see my vicegrip slipped. So close, yet so far. I will try to pull the chain feeding into the sprocket tighter so the outgoing part of the chain lengthens where I need it. The door stays open by 6 inches at this point. If anyone can give a comment I'd appreciate it! Happy Springtime!
Ok here's my own reply -- video may be needs to state to tighten the chain from the fixed end when re-sprocketing it. That helped me with the last step. Everything else in this video completely matched my situation, including the difficulty accessing the 5/16" nuts holding down the worn out gear! Thanks
Hey I’m glad you got the trolley situation resolved! Yes I think you’re right. The location of the trolley can be adjusted when reattaching the chain to the sprocket. Lots of things on my mind when doing this repair and shooting video at the same time. But I’m glad you got the repair done! Thanks for watching!
This will save me $200! Thanks bud!!
You’re welcome! Changing out the gear yourself will definitely save you a lot of money. And it’s not difficult to do! Thanks for watching!
@@digitalcamproducer I did it yesterday with the part you linked to. It worked out great! Fun too! Thanks again😀
Extremely helpful and useful video. Thanks for sharing.
Great Instructions
Thank you. Exactly what I needed. Love your presentation.
Very well made video, thanks! And I like your ride starting around the 6:04 mark. Looks like an older model Caddie possibility?
Glad you enjoyed my video! Yes that is a 1977 Cadillac Coupe DeVille in the shot at the end. It’s my dad’s car and he still drives it!
Great tutorial! Have two questions: 1) I can hear motor running sound, but how to test and make yourself sure that motor is still working normally (i,e. wires not partially burned out)? 2) I saw you replaced the upright gear and sprocket. How to be sure the horizontal gear attached to the motor is good such that no need to replaced? Thanks!
Thanks for posting this, made the job easy and quick!
Nice video, thanks for illustration. If I'm not mistaken, that's an old Cadillac I see in the video. I had a couple myself, GREAT CARS!
You’re welcome! Glad my video was helpful! And yeah that’s my dad’s 1977 Cadillac Coupe de Deville. Still drives it to this day!
Thank you for posting this. It definitely helped me.
nice video ,how and where can i buy a garage opener 4 wired for this sears craftsman model as shown.recently i replaced the gwar successfully but now i need to replace the garage opener needs to be 4 wired, thanks
Thank you so much for the help!
You’re welcome! Glad my garage door gear replacement tutorial helped! Thanks for watching!
Thank you! Great instructions. Worked perfectly. Saved me $$$.
You’re welcome! So glad you were able to fix your garage door opener yourself! Definitely saves a lot of money. Only have to pay for the parts! Not too difficult to do either!
Excellent video, made me feel like I could make the repair and yes I was successfull. Thanks You so much!!
You’re welcome! So glad you were able to fix your garage door with my video! Nice work! Thanks for watching!
this is a great video. i have the exact garage door opener. my top gear snaped off
Low ceiling clearance above garage door opener. I’m able to loosen and disconnect the sprocket but unable to lift it out. Any suggestions on how to get out old sprocket w/o removing the whole unit?
Thank you so much. This was very helpful
You’re welcome! Glad my video was helpful! Thanks for watching!
Thanks for the instructional . Works well now.
Extremely grateful for this. Thank you!
You’re welcome! So glad my instructions helped! Thanks for watching!
Hey there, video was great! We followed it but now when we push the button to open the garage it only moves a foot and then reverses. Any tips?!?!
Even though I did the repair I’m not an expert at garage door openers. But you can check your see if the newly installed gear is able to rotate without any friction. Maybe the chain is too tight? Check the motion sensors to see if their LEDs are lit for normal operation. And also check the wires that connect the motion sensors to the garage door motor. One wire might’ve come loose during your repair? Hope you get it figured out!
Thank you so much,, that was very easy following your instructions..
Thanks for the good explained video . 👍 ,, ✌️ . ( and the song at the end ,,, I was just listening to it ,, 😅 )
You’re welcome! So glad my video tutorial helped! Thanks for watching!
Took a little longer but I finally got it in...
That's what she said
Haha! Thanks Michael Scott!
You saved me a ton of $$$. I'm going to make it seem like it is an afternoon-long, 10-beer project; and then look like a miracle-worker a la Scotty on Star Trek. 🖖
Nice work! Star Fleet would be proud! Glad you got your garage door working again!
can i ask you a question about how to repair / replace the gear
hi, thanks for posting the video. I am in the middle of replacing the sprocket now but I am stuck. I followed all your steps, when inserted the new sprocket in the large gear hit the worm gear and was not able to put it all way down the housing. The worm gear is sticky due to the old gear shaving creased together on the surface of the worm gear but not a lot of them. I am not sure if I need to and how to replace the worm gear. HELP PLEASE! Thanks a bunch!
Sorry the worm gear is giving you trouble. The main sprocket should slide right next to it. Can you rotate the worm gear a bit? It’s probably locked in place. It might be a case of wiggling and rotating the sprocket/worm gear enough to allow it to slip in place. Hope you get it installed without too much trouble!
@digitalcamproducer thanks for your reply. I finally bought a genuine part and put it in without any issue. The problem was that the part I first got was aftermarket.
Because of my husband’s health issues I’ve started doing more DIY repairs around the house. Your video was great, thank you for that! I followed it step by step and it appears to be installed properly. However I haven’t tried it as the chain is seriously sagging. I clamped where the trolley was located, but originally the sprocket holding the chain sheered completely off, leaving the chain hanging. The door opened 1/2 way and quit when I discovered the issue. I had to disengage the door to open it in order to get the car outside. Before engaging the door, like you said, I want to test it. I don’t know if I moved something I shouldn’t have. Will it tighten up or do I need to call a professional?
Update: The line (connected to the chain) was off the pulley at the other end causing the huge sag (it must have been off for a while, causing the original problem); we got that put back on. Before putting on the chain, we hit the button to bring the motor to the down position (some thought to figure that out:) and brought the trolley all the way to the stop before the motor. After loosening the chain to allow it to be put around the sprocket, we tightened the chain so it was 1/2" above the bottom rail (a little sag) per other videos we watched, connected the door and seemed to have fixed the problem. A huge thank you for instructions on a repair done for less than $20! Yes, a lot of time was spent, but I learned and gained confidence. I'll never look at a garage door opener the same again!
You rock brother, thank you
Thanks! Glad my garage motor repair video was helpful!
I replaced the part, but my chain only moves a foot or so then stops.
What did I do wrong?
The only difference is my top chain sprocket snapped off vs your inner gear wearing out. Same replacement part tho
My chain was off the top gear so I loosed the tension and put the chain back on. Now it goes a few inches…. And goes tight and snaps back into place without allowing the chain to go further. The underside sprocket etc are engaging fine… could I be having the same problem as Gio Tor? Not sure exactly what is wrong please help! Thanks so much!
Thank you so much!!! Most helpful!
Do the pins holding the gear the gear just slide out? Mine are stuck af
What do you do if you replace the sprocket assembly with a new one and now the big white gear and the big worm gear are so tight that the motor can't spin?
Thank you so much for this ❤
Nice video, thanks for the help
How do you know if the chain is to tight
THanks, learned.
Glad to hear it! It’s actually not that difficult to replace the main gear on the garage door opener.
Thank you my wife would not let me buy a new garage door so I have to fix this the same way you did yours÷!😁😁😁
Glad my video helped! At least you’re saving money! Thanks for watching!
Great vid, but why did you not replace the main gear of the motor? It's in the kit. Just an observation but why go back in there again. The main gear off motor is just as old as parts that went out.
very good
Thank you so much for this, you helped me from getting scammed $100 by a local handyman!
You’re welcome! Some of these home repairs can be done yourself easily! Just pay for the parts and that’s it! I always have to try before calling someone because I can save money fixing things myself if I can! Thanks for watching!
I don't understand how paying $100 is scamming you. If your handyman is buying the part and doing the repair, that's not a scam, that's a deal! Even if you buy the part for him to use for the repair... That's still a deal!
That same part today is about $40 because I just ordered one. There's some tedious work that needs to be done when doing this even though it's not brain surgery. Anytime something is done for you it costs something.
$100 is not a scam at all.
@superdave7241 so I bought the part and I looked up how to fix the motor nut didn't have time to do the work. A local handyman quoted me $50 for the job then came back and said he would only do it for $100. Therefore, I found this video and did it myself.
@@SupaFragolata I got all that and that's not the problem. It's saying that 100.00 was scamming you. Anytime something is done for you it costs something. If you have a car detailing service come to your house to detail your car for you... It costs more than you washing it yourself. They aren't scamming you, they are charging you for their service. I don't no why that's hard to understand... They are charging you for a service they provide and not scamming you. 🤦♂️
@@SupaFragolata Now if he said, he would do the whole thing for 50 or $100 and then said after swearing he knew what it was and showed you what it was, and then minutes later said it's impossible to buy the part and they don't make them anymore and you need a whole new unit and he will charge you $400 or $500 to install it.... That's scamming you
I've been a tight-wad and only purchased the big, white, nylon cogwheel. Does anyone know how to remove the black securing pins that hole it in place on the shaft please?
thanks for the help bud
great video!
Mine lasted 15 years of using it probably 4 times a day, changing it was easy, a little adjustment to the chain but fairly easy.
Yes the replacement of the sprocket on the garage motor is fairly easy to do. The chain adjustment is a little more daunting but not difficult. You definitely save money doing this yourself! Thanks for watching!
@@digitalcamproducer actually have a Marvin Allen salesman come to quote me new systems, he didn’t mention that I might be able to fix it myself.
Thank you!
What can you do if your trolly got moved after you removed the chain and you don’t have a reference of where it was before
Hey There .
I think I was reading ,,, you might have to then adjust the UP and DOWN force settings . ( Also TH-cam videos on this ) . But as even a better maintenance step ,, I'd check the rolling and balance of the door ,,, the proceed with the UP / DOWN force adjustments . I always ( and read ) it's best to have a good manual opening door to put less stress on the motor / mechanical parts . Hope this helped a bit .
You can also detach the chain from the sprocket on the top of the garage door opener. Then adjust chain until the connector is as close to the trolley as possible… then reattach the chain to the sprocket. Then as the other commenter said, you can adjust the up/down limit switch on the opener. Only if necessary. Hope this helps!
While you have everything accessed and right in front of you, why don't you check the other bushings for excessive play, wear and binding? It would be an opportune time to lubricate these other bushings even if they don't require replacement.
Otherwise, great video. Well done!
Anyone know where I can get these parts these day? I think the manufacturer stopped making them.
e-bay
Thanks for your question! I listed the parts in the description of the video. They’re available on Amazon. That’s where I got mine! Hope this helps!
@@digitalcamproducer same 1 week ago
The one screw that’s so hard to get back in the gear kit .. I just run that screw down from the top.. saves time and frustration..
Oh yeah! That is a great idea for that tough to reach screw! I will remember that! Awesome tip! Thanks for watching!
Thank you very much
You’re welcome! Glad my garage door opener repair video helped! Thanks for watching!
I wish I saw this three days ago. I would have bought a new Chamberlain opener.🤦🏿♂️🤦🏿♂️🤦🏿♂️🤦🏿♂️🤦🏿♂️🤦🏿♂️🤷🏿♂️
Superb
I’m glad my garage motor repair video was helpful!
Excelente
There are 2 reasons why this gear was damaged. First: it should be greased once every 2 years. Second: your garage door may be overweighted (unbalanced) you should be able to open it and close it with only one hand. If not, call an expert to readjust (or change) the spring(s) before you reattach the door opener.
Here's a good? What cause the sprocket to strip.😮
I’m not sure what caused the sprocket to strip like that. It had been working no problem then it stopped working. When I looked at the sprocket it was shredded. No choice but to order a replacement.
@@digitalcamproducer ya same happened to me I replaced it .but now the door goes up but when I click it to go down it buzzes and qwits won't go down and the chain around the sprocket is very tight.but the rest of the chain is loose.
Good video, but NOT COMPLETE! If you change the drive gear, you HAVE TO CHANGE THE WORM GEAR TOO! iT SAYS SO RIGHT IN THE PARTS INSTRUCTION GUIDE. Yes, it's a more involved job and requires mechanical skills, but if you don't, you'll be doing this AGAIN sooner!
That’s what I get for not reading the instructions! Maybe I’ll revisit this project and swap out the worm gear. But it’s been 2 years since I replaced the main gear and no problems so far using old worm gear.
Why do they not make the Gear with Metal rather than PLASTIC
I just looked on Amazon and there’s a seller that is selling an aluminum main sprocket and worm gear. If this nylon gear breaks down I’m getting the aluminum one.
@@digitalcamproducer Link Please