By the way, how would you know which is national blue sponge or if its regional version? I also want to know whats the difference between this neo version and the white packed ones 🙏☺️
The effect last about 1-2 months. The sponge however is permanently softened and more springy. I usually boost, wait 2 months, take it off, reboost and play till it's dead.
Putting a layer of glue first will give some protection to the sponge so the booster doesn't damage it that much and the sponge can last a couple more cycles of boosting, but that also means the sponge is not absorbing all the booster, so your boost is less effective. So if you want to sacrifice a little bit of performance in exchange of a longer life of the sponge then put a layer of glue on it first, but if you can afford it and just want the absolute full potential of hurricane 3 you should put booster directly on it. But in the end, it all comes to personal choices, everyone do it differently and some people may not even like boosting it too much for many reasons. So experiment it yourself and apply the way that feels most comfortable for you
If i can buy dhs hurricane 3 national ( not neo ) but its 2.2 thickness and also i can buy neo 3 national 2.1 which one is better to buy ( im planning to boost it ) Is it not recommendable to boost 2.2 thickness hurricane?
@@philipyyfr1977 i boosted hurricane 3 neo nations 39 degrees with 2 layers of booster . It is domed for like 100 hours already . Should i glue it now or wait until it is completely flat
Depends on the H3. Neo has a pre applied layer so you can boost directly, non neo doesn't so you have to put a layer of glue first. I don't bother recommending non neo H3 unless you are using voc speed glue.
Hello, thanks for the video, which booster do you use ? I use seamoon and the bottle is yellow. I see it s Haifu, maybe it s the same as mine, but I have an older version
I am a professional player on my own. search mohit kumar table tennis on youtube you will find my tournament matchs. That why, i believe its too much glue
Did you ever try H3 boosted on backhand, can that be a thing ? Tried once non boosted and my backhand was like dead. Flip and block control was good but speed was painful.
![CAMPปลิ้น | รวม Highlight 2024! PART [1/2]](http://i.ytimg.com/vi/6hnvNnvYloU/mqdefault.jpg)
For that rubber you are using but the national one and what you would recommend the yellow one or the black one booster. Which is the difference?
How long does the boost effect last for H3? Should I re-boost after that?
Bonjour
C'est une super méthode
Au bou de combien de temps il faut refaire le boost ?
La méthode est t'elle la même?
Saya gunakan H3 Commercial FH, dan Skyline 2 di Blade DHS Power G7 apakah itu suatu kombinasi yg baik... Mohon sarannya...
With the glue layers between the booster - does that mean the effect lasts longer? How long would this last roughly? 2-3 months?
By the way, is the booster brush made from boar bristle?
By the way, how would you know which is national blue sponge or if its regional version? I also want to know whats the difference between this neo version and the white packed ones 🙏☺️
national because the rubber is a square
2 corner is cut if it was a provincial and 4 for commercial
Hi sir , thanks you for your hardwork . I have a question. How long does the effect take?
The effect last about 1-2 months. The sponge however is permanently softened and more springy. I usually boost, wait 2 months, take it off, reboost and play till it's dead.
@@philipyyfr1977 When you do 'reboosting', do you repeat the same process as when you first boost?
If i use haifu regular and only do two layers should i do one layer booster, wait 2 hours. another layer, then glue onto blade?
will this make the rubber faster?
Can I boost a normal H3 neo to put on a viscaria? it will have a similar feeling as the provicial?
How many layers of booster would you apply on a new H3 national neo 39 degree?
personally 2-3 layers like in the video but it depends on your hand feel.
I have difficulty gluing domed rubbers like this. What am I doing wrong? Some parts of the edge of the rubber peels off.
wait till it domes less
Hi ! Thanks for the share. My Black Haifu oil is dark color, your oil is light blue. Can you tell me if it's different or the same thing ?
Mine is black, maybe due to the lighting and the sponge color it looks blue.
Hey, does boosting change the life span of the rubber?
Yes it slightly shortens it.
Where can I buy genuine Haifu booster and DHS rubbers?
tabletennis 11 and Prott.
Do you recommend putting a layer of glue before applying the booster?
Putting a layer of glue first will give some protection to the sponge so the booster doesn't damage it that much and the sponge can last a couple more cycles of boosting, but that also means the sponge is not absorbing all the booster, so your boost is less effective. So if you want to sacrifice a little bit of performance in exchange of a longer life of the sponge then put a layer of glue on it first, but if you can afford it and just want the absolute full potential of hurricane 3 you should put booster directly on it. But in the end, it all comes to personal choices, everyone do it differently and some people may not even like boosting it too much for many reasons. So experiment it yourself and apply the way that feels most comfortable for you
Should I get a H8-80 37 or H3 Neo 37 for my backhand? I plan to boost with one layer of Haifu Seamoon and put on Vis SALC?
I like H3 37 more if you are boosting.
@@philipyyfr1977should I use regular Seamoon or the Seamoon black or yellow?
@@astamak2566 I use Haifu Black personally.
@@astamak2566 Yellow is best overall
should i boost DHS NEO Hurricane 3 Provincial (Blue Sponge) if i have stiga cybershape carbonn and if yes would haifu black work with the rubber
Yes and yes.
hello, does the booster affect your health
This is non voc booster, so most likely not, I don't however smell directly into it.
@@philipyyfr1977 Thanks for your answer, is every Haifu booster non voc ?
Не понимаю, зачем бустерить накладку, если её сразу можно сделать мягче?
If i can buy dhs hurricane 3 national ( not neo ) but its 2.2 thickness and also i can buy neo 3 national 2.1 which one is better to buy ( im planning to boost it )
Is it not recommendable to boost 2.2 thickness hurricane?
@@UTUBEUSER12WAS I would go 2.1mm neo national. 2.2 is usually for speed glue.
@@philipyyfr1977 thanks a lot i’ll order it rn
@@philipyyfr1977 i boosted hurricane 3 neo nations 39 degrees with 2 layers of booster . It is domed for like 100 hours already . Should i glue it now or wait until it is completely flat
@@UTUBEUSER12WAS you can glue it.
@@philipyyfr1977 wont it peel off? it have really decent dome
why do other people put glue first then add the booster?
Depends on the H3. Neo has a pre applied layer so you can boost directly, non neo doesn't so you have to put a layer of glue first. I don't bother recommending non neo H3 unless you are using voc speed glue.
Hello, thanks for the video, which booster do you use ? I use seamoon and the bottle is yellow. I see it s Haifu, maybe it s the same as mine, but I have an older version
@@mAtt1111 Haifu Black
Thanks !
@@philipyyfr1977 will the method work with haifu yellow?
Hey ❤
this is too much of glue, this guy doesn't shit. believe me , i am a national player of TT myself
th-cam.com/video/ryrqLp9d2XU/w-d-xo.htmlsi=5gXmJJCu753g28A9 Yuan Licen does 4 layers of DHS 15 glue (which is thicker than my Rev3)
I think you are crazy this guy seems very knowledgeable.
I am a professional player on my own. search mohit kumar table tennis on youtube you will find my tournament matchs. That why, i believe its too much glue
Did you ever try H3 boosted on backhand, can that be a thing ? Tried once non boosted and my backhand was like dead. Flip and block control was good but speed was painful.
I always boost my BH H3 37 or 37.5, same process as this one.
@@philipyyfr1977 How many layers would you put on an H3 37? I'm afraid that it will become too mushy if I put too many layers.
@@robin1608 the same process, just put thin layers.