Another epic video!!! Added bonus raptor liner!!! Bruh I hope you’re documenting all this?! I can see them wanting to do a sponsored build. Never even knew these guys were another option on the market. All around great videos! Can’t wait till your channel blows up.
Came out good so far but I don’t have the patience to even attempt that! I took the easy way out & went to a local salvage yard & got the fenders, grille, & bed minus tailgate cause I not running it or the bumpers since I’ll be running aftermarket ones. $2,300 for all that. Kudos to u tho bro!
What did you do as far as fender liners for the front I'm thinking about doing their 11th gen prerunner as I'm in need of a front fender and my bed sides have already been patched once before I bought it and need to be done again their rusting through lovely Michigan Winters
@@tmctaz9542 I just knew I needed an extreme offset since I didn’t want to run 2” spacers. I come from the low and slow world of Japanese cars and knew correct offset is key. This is the polar opposite world 😅
@@EdmonJiddou I was guessing a 2 in spacer would fix it.. as I already have the OEM raptor Wheels I want I don't have a problem running a 2 inch spacer for what I want but I understand you didn't want to go that route
Looks great man, nicely done! If you haven't already, have you swapped the rear axle over to a Raptor one? Might help with your positive offset issue. Only problem is you'll have to regear your front to 4.10s. Edit: Additionally, are you planning on reinforcing the frame and the rear shock mounts? If you are, I can send you photos of the locations of the reinforcement locations.
Sweet truck. With this much work man you coulda threw a dope long travel kit on there and been better than a raptor. This is from a guy that owns a '19. Is this truck a V8?
Only real trimming needed was around the headlight, ADV give you about 2 inches to much material for you to cut around the make the fitment as close as possible. And also around the headlight support plastic piece, you need to trim a bit of material.
@@DoubleDiamondRanch2025 everything is OEM, except the fenders. I wanted a more aggressive look than a stock raptor, figured if I’m doing the work then I want to go bigger.
@@EdmonJiddou right I totally get that part. But I was wondering if you know where I could even buy those kind of parts? I’m getting a 2018 stock 4x4 f150 but I’m going to make it look like a raptor
Lose the “Raptor” tailgate badge please. Putting on Raptor parts does not make it a Raptor. A Raptor is so much more than a grill, suspension and Fenders. I’d have more respect for your build if you kept the Lariat badges.
Your right, a raptor is: bumper, grille, headlights, headlight trim, hood, fenders, bedsides, running boards, tailgate, steering wheel, seats, suspension, wheels, down pipes, exhaust and a twin turbo V6. All of which I have installed. Never claim it’s a raptor, I just like the tailgate appliqué. 🤷🏻♂️
Kudos to you bro for doing all the work yourself! Great job, bedliner came out fantastic as well.
Thank you! It’s rewarding when done.
Another epic video!!! Added bonus raptor liner!!!
Bruh I hope you’re documenting all this?! I can see them wanting to do a sponsored build. Never even knew these guys were another option on the market. All around great videos! Can’t wait till your channel blows up.
You are too nice my friend, just documenting for myself and if people find value or entertainment then that’s a plus. Thank you 🙏🏼
New video is up adewale! 👍🏼
I like everything especially the sign on the side of your house.
Haha thanks man! And the house with the sign was my friend Randy’s! 🙏🏼
Amazing video, very detailed and informative. Love your truck.
excellent video ... you motivated me to be the same with my F150 2017👏🏼where can I buy the Quarter panels??
Came out good so far but I don’t have the patience to even attempt that! I took the easy way out & went to a local salvage yard & got the fenders, grille, & bed minus tailgate cause I not running it or the bumpers since I’ll be running aftermarket ones. $2,300 for all that. Kudos to u tho bro!
Thanks! It’s a good amount of work but that’s the best way to learn and save a good amount of money. My time/labor is free. 😬
Looks Great Edmon, will these fenders fit a 2015 Ford F150?
Hello, they will bolt up, but will not “fit” unless you get the hood and grille from a raptor, the bedsides will fit but will stick out around 4”
Thank you just subscribed, I plan on following the same steps to make it look like one, allreciate the feedback
What year truck is this? I’m looking on the website in your description and it only goes up to 2014 for me
Where did you buy those raptor fenders? Love the build!!! 🤝🏼
Thanks! ADV advance fiberglass concepts
What did you do as far as fender liners for the front I'm thinking about doing their 11th gen prerunner as I'm in need of a front fender and my bed sides have already been patched once before I bought it and need to be done again their rusting through lovely Michigan Winters
I purchased their ADV front liners, have yet to install, that will be coming here soon along with mud flaps for the rock kick up.
@@EdmonJiddou how did you figure out that you needed a -30 offset to make it look right
@@tmctaz9542 I just knew I needed an extreme offset since I didn’t want to run 2” spacers. I come from the low and slow world of Japanese cars and knew correct offset is key. This is the polar opposite world 😅
@@EdmonJiddou I was guessing a 2 in spacer would fix it.. as I already have the OEM raptor Wheels I want I don't have a problem running a 2 inch spacer for what I want but I understand you didn't want to go that route
@@tmctaz9542 for sure, a 2" spacer works fine with OEM raptor wheels and suspension.
Nice truck men , the husky bed liner extension fit perfect with fiberglass fender ? Do you have a picture ?
They do with a bit of massaging and heat! I’ll make an update video soon. Thanks for watching!
Badass
Ur awesome man
I am indeed impressed
Any chance you still have driver side panel?
WAY TO ROCK THAT FLAG BROTHA MINUS THAT SNAKE PENCE
Spot weld cutter not rivets, nice job looks good.
Are need any modification for install the oem raptor front bumper to f150?are the nuts bracket hole.the same position?
All mounts and bolts are the same from raptor to f150.
@@EdmonJiddou thanks Sir,,
@@EdmonJiddou how about the inner.fender liners?are u customed or don't used it?
It's looking GREAT!!!!!
Thank you! BIG Wheels and tires next! 💪🏼
Where can we find you to do that?
I'm not taking no for an answer on silver lake trip next year! Time to get that thing off the ground!
what you doing the 24th?
@@EdmonJiddou no idea. Not sure if my truck will be done. Heads are at the machine shop.
Good Job 💪🏻
Is it possible that i put the fenders without changing the bonnet ???
No, the hood does not fit with the raptor spec fenders, sorry.
What did you use for rivets on your panels? I'm mid-project and trying to sort that out. Thanks!
Let me check when I get home, I also used some commercial grade panel bond as well. I will get back to you.
How about the inner wheel liners?u customed or used the oem raptor?
Wish you showed the removal of the fenders too
I might be one of the few that like the look of the f150 fake raptor without the actual body fenders of the raptor
Once painted it should look much better, thank you for watching 🙏🏼
@@EdmonJiddou yeah I've seen it painted. It will look good.
Looks great man, nicely done! If you haven't already, have you swapped the rear axle over to a Raptor one? Might help with your positive offset issue. Only problem is you'll have to regear your front to 4.10s. Edit: Additionally, are you planning on reinforcing the frame and the rear shock mounts? If you are, I can send you photos of the locations of the reinforcement locations.
Thanks! And yes an axle is on the list. The new wheels definitely helped fix the aesthetics of the rear end gap. New video this week. 👍🏼
@@EdmonJiddou right on man! I just followed you on IG. Let me know if you end up wanting those photos via DM. Looking forward to the next vid! 🤙🏻🤙🏻
Episode 4 is up! 🙏🏼
What rear fender flair is that? Bushwacker?
The entire panel is one piece, Advance fiberglass concepts is the company.
@@EdmonJiddou I get that. I was talking about the ones you had on before you did the bedsides.
@@DrPhunkFresh www.ebay.com/itm/372178578071
Sweet truck. With this much work man you coulda threw a dope long travel kit on there and been better than a raptor. This is from a guy that owns a '19. Is this truck a V8?
I agree! Unfortunately long travel kits start for around 8-10k plus shocks...so for now raptors suspension will do. 👍🏼 thanks for the support man!
So what exactly you cut to male them front fenders fit
Only real trimming needed was around the headlight, ADV give you about 2 inches to much material for you to cut around the make the fitment as close as possible. And also around the headlight support plastic piece, you need to trim a bit of material.
Nice flag brooo 😎😤💯💯💯
Really saved a lot by doing this yourself. 🙌 looks awesome. How much $ to get this done about?
Check out the latest video of it painted, I break down the price.
Is this coyote or ecoboost F150 your doing the raptor conversion on?
2.7 ecoboost, check out the latest video it’s painted and on new wheels! Thanks!
great video and you did great work.
Thanks man! Check out the latest video on the build.
Did you get the 4.5inch bulge or 7inch. I know fiberworx offer both
ADV 2+ rise, 2+ bulge. It was a bit wild before I swapped over to new wheels. But not it looks great. Check the latest video.
You, you selling your old bed sides? I need a right bedside
Sorry, sold them both last week!
@@EdmonJiddou dang
Hey brother what year is your truck?
2016 👍🏼
Can I buy the old body panels??
And you’re in Michigan !
Sorry man, sold everything already.
where did you get that trim for the spots under the bumper?
Trim under the bumper? I’m not sure I understand..the skid plate?
Bad ass! Subbed!
Thanks dude, subbed to you as well!
Damn! Might need a long travel kit
Machete beadlocks are going on tomorrow, we’ll see how she fills out on stock raptor suspension...
Do you sale after done .
No, truck is not for sale. Thank you.
Wrap it!!! I am also sad that they have no parts for the 2016 F150 😭😭😭😢
Nice thanks for sharing
Where did you buy the parts??
The body panels? They are from ADV, Advance fiberglass concepts.
@@EdmonJiddou oh so they’re not OEM parts
@@DoubleDiamondRanch2025 everything is OEM, except the fenders. I wanted a more aggressive look than a stock raptor, figured if I’m doing the work then I want to go bigger.
@@EdmonJiddou right I totally get that part. But I was wondering if you know where I could even buy those kind of parts? I’m getting a 2018 stock 4x4 f150 but I’m going to make it look like a raptor
Join raptor swap pages on fb, guys are always posting up take off parts for cheap, suspension, body etc...eBay is good as well.
Ohhh das nice!!
Was the quality so good that you didnt have to do Fiberglass work?
It’s was 8/10 there’s always some work that needs to be done, some pin holes nothing crazy.
@@EdmonJiddou so body lines and gaps are close to factory is what i ment.
Niiiiiiiice 💯🫡
I love the Trump sign
Why not just buy a raptor?
I have about 22k all in, a new raptor is 60+? I think it’s obvious why someone would build one.
For all that work you should’ve just bought a raptor
Haha I agree!, but what's the fun in having what everyone else has?
Trump flag? Unsubscribed!
Did the work at a friends house, not mine. But i understand and thanks for the support.
Trump 2020
Cope
Yes sir
Lose the “Raptor” tailgate badge please.
Putting on Raptor parts does not make it a Raptor.
A Raptor is so much more than a grill, suspension and Fenders.
I’d have more respect for your build if you kept the Lariat badges.
Your right, a raptor is: bumper, grille, headlights, headlight trim, hood, fenders, bedsides, running boards, tailgate, steering wheel, seats, suspension, wheels, down pipes, exhaust and a twin turbo V6. All of which I have installed. Never claim it’s a raptor, I just like the tailgate appliqué. 🤷🏻♂️
Plus, if I could simply remove the Raptor badge I would, unfortunately it leaves an indentation and would look strange.
Am i the only one that thinks the once nice truck now looks AWFUL lol
Maybe if he matched up the paint atleast...
All in due time, paint will definitely help pull it together. Thanks for watching man! 🙏🏼
Wow cool