ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to Change Strings on Classical Guitar with a 12 Hole Bridge
ฝัง
- เผยแพร่เมื่อ 14 ก.ย. 2015
- Order Your Handmade Classical or Flamenco Guitar Here: erez-perelman.com/contact/
Watch and learn- there are too many guitars out there with horrible damage to the top from strings slipping. This method to tie the strings on the bridge makes sure you wont have a string slip and damage the top.
![CAMPปลิ้น | EP.79[2/2] มานั่งฮ้านกินข้าวนำกันเด้ออ้ายยย](http://i.ytimg.com/vi/pHIS_Sdy8P8/mqdefault.jpg)
Thank you for such a clear demo! Reduced my anxiety about changing the strings for the 1st time on an expensive guitar.
By far the best 12 hole bridge string changing video on TH-cam! Thank you!!
I've done 6 more holes on the 1/4 guitar of my son to lower the action and I didn't really know how to tie the strings on that modified bridge. I've now got the best method !
Thanks a lot.
Thanks for this video. After more than 40 years guitars with a 6-hole bridge, I got a guitar this summer with a 12-hole bridge, and was lost. This video really helped. Also, that trick of making the loop and pulling the knot through is terrific -- the sort of thing you learn and realize how many hours could have been saved over the years.
This is exactly me too.
This is an excellent demonstration and a solid method. Just keep in mind that if your guitar is like mine and has the lower hole to the right (as you look towards the neck) then you need to reverse the direction of the loop, etc. But it works just as well.
Thank you! 19 years in the trade and I just got face to face with my first 12 hole wrapblock. Your video was very helpful!
Excellent video. I watched a lot of them. Even though I don't have a 12 hole bridge, this is an excellent tutorial, because a very confusing step is tying the string to the tuning machines, which almost no one explains clearly. Thank you Erez!
Thank you for this detailed explanation, man. I appreciate this just like anyone who needed it🔥
at last I can tension my strings fearlessly! Thanks you for sharing this restringing method.!! So simple yet so effective, faster and easier than my old way!!
Thank you. Excellent, patient, thorough instruction throughout the video!
W video! Never in my life I’ve stringed a guitar for so long! It took my 2 hours 😭
I really like how you do the trebles at the bridge. It's the tidiest and most secure I have done so far.
Thank you for such a detailed and clear description. I was always tying knots on the treble strings, but this way is much easier, faster and more elegant.
This is a very easy and stable method. Thank you very much for your video!
What a solid method...always questioned how to get the trebs a good fit. Shared this video
Greatly appreciate your excellent demo. Clear as a bell and very helpful. Thank you!
Merci pour tous ces détails très expliqués et très bien filmés. Super tuto!
Fantastic video! Great video shots & great explanation.
Thank you. Really neat job and I will be using your method when I change the strings on my Ortega in a few days time 👍
An exemplary clear explanation on how to change classical guitar strings. A real professional here. There is no way it can be done 'properly' by an intuitive approach by reference to changing strings on an electric guitar
Excellent video. Very clear and simple to follow. Thanks..
Thanks Erez. Great explanation. This is how I will restring my 12 hole guitars going forward.
Merci beaucoup, votre méthode est impeccable et très bien expliquée
This was very useful! Thank you very much!
Thank you, the video is very helpful.
Thanks very clear explanation very helpful!
The explanation is very clear. Thank you. One question to ask is will you use the nail clipper to cut off the extra strings on the head side? If yes, how much to cut off?
סרטון מצוין ארז, תודה רבה! אתה גדול!
Looks straight forward but I did have some issues. I think holding the free end of the string, after it's been pulled through the loop, against the back of the bridge is important to get the the loop twisting the right way. I did, however, have slippage of carbon strings, E and B string, despite roughening the end with sand paper. I suppose the demonstration is with nylon trebles and maybe they grip better? I now take the free end of the E and B string twice through the loop after it's been twisted and so far so good. :)
Excellent. Thank you.
Excellent video. Intrigued by the drill attachment for tightening the strings - is that something you devised your self or is it available commercially?
Thanks for this!
This video was helpful
Thanks for the very clear demonstration and explanation. I'd like to ask you which electric drill winder bit you have, it looks more protective of the instrument than the one's I've seen. I'd feel more secure using something like that as opposed to the hard plastic variety that could potentially scratch the finish.
Hi Dan, I made this winder out of a piece of wood and glued a hex driver to it. Works pretty well, and you can do the same;)
Thanks s lot man❤
Also, the direction for winding strings on the headside, I had the 4th and 3rd strings touching the center wood part if I followed your direction. IDK how, maybe your guitar and mine are differently structures.
thank you very much
Can I use this kind of bridge with steel wires? 🤔 the slot for the saddle is huge on my guitar I got used! I can fit 2 saddles in it!! Haven't seen a slot that big on any other guitars, it looks like it had 2 round things, one on each end of the slot & something between to hold the saddle. I like it cause it doesn't have pins but can't use it without a saddle. Opinions or Help if you can.
Thanks for posting this. Cool technique but it only worked for my g string. Kept slipping on the other strings and had to switch to a different method. Unfortunate since I like the ease and aesthetics of this one.
really? damn. just out of curiosity, what strings were they? carbon?
@@mackhomie6 Yes
@@seattlevkk yeah, I've had trouble with those lately. just curious, what part of Seattle are you from
@@seattlevkk also, it just occurred to me that maybe we could sand the last few inches of the string just to give it some texture
Very helpful. Great Job. There is one question left. What happens with the overlength string ends at the head stock? Do you cut them?
Yes, you can clip excess string from the head stock
I'm surprised that you pull for no slack before tightening. Have you ever had an issue with that?
I can no longer differentiate between the top and bottom holes on my 12 bridge, would it be more common practice to start the string in the hole closest in proximity to the bass side?
I am extra careful. With plain nylon string I like to burn the end of it to form a ball. That way it will never slide off. With the wound string, I like to make an extra loop around the pressing point.
I love this! I am a woodworker but not a flamenco guitarist. Your passion and craftsmanship are wonderful!
Great!!
Best method ive seen for my 12 hole guitar. Thank you.
Olé!
11:00 treble bridge tie
It was a good video, until I realized my holes on the bridge are actually opposite. Otto Vowinkel 2A, spruce. Now I gotta redo the thing. Too bad, thanks anyhow
Looks like hard work. Try this way . String through first hole. Bring the end up and tie a half hitch round the main string (the long bit ). Then feed the end through second hole and bend the end in position. After the half hitch the string cannot escape . Practice with thicker cord on a piece of wood to understand the mechanism. Basic knots --half hitch .
please tell me the distance between the two holes and the hole diameter ...is it 1 mm?
I have just made one of these bridges and I made the holes 1.5mm diameter and the gap between them is 3mm. Seems to work on mine om
Efharisto!
How to changes of C40 yamaga guitar string....
The way your nails are shaped is an Iodine deficiency called clubbing. Thought you should know.
Great video. I f you ever look for a change, you might consider a career as brain surgeon. ;)
So the lesson learned is, no single rule applies. Try it out, but don't go blind
Your a pain.
too much yapping. this could have been explained in half the time!!!!