Daikin Altherma MMI Controller - Complete User Guide

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ก.ย. 2024

ความคิดเห็น • 6

  • @gaywatton1753
    @gaywatton1753 7 วันที่ผ่านมา

    Heeeeeelp! Re weather compensation

  • @ThereseHurley-km5bq
    @ThereseHurley-km5bq 2 หลายเดือนก่อน

    thanks a million, that was very helpful

  • @FrancescoSpighi
    @FrancescoSpighi 3 หลายเดือนก่อน

    Thanks so much for the video; it was super helpful. Can you confirm for me that the dark blue means it's in "STOP" mode? The manual says that darker colors mean the hottest temperature, which fights with what we see here.

  • @EnjoiPandaCow
    @EnjoiPandaCow 2 หลายเดือนก่อน

    Would it be possible to show us to change modes say from schedule to reheat? ... Can't figure it out on mine.

  • @already0000
    @already0000 หลายเดือนก่อน

    I will have a heat pump installation by CB heating soon, but a bit confused by the tank temp. Once it is heated to a certain temp, does it hold the water warm for a few hours so that I can use the hot water throughout the day? Or do I need to presume what time I will have a bath and set the water tank temp accordingly? Please advise, thanks.

    • @edwardbyard6540
      @edwardbyard6540 11 ชั่วโมงที่ผ่านมา

      If you don't already have your answer: your tank (assuming it is a modern tank!) will hold temperature for a long time. My tank, a Daikin, loses about 2 degrees each 24 hrs. Remember that you only need your hot water set to a maximum of around 48 degrees as most of the time you mix it with cold water for a shower etc, and you only need to run a legionella cycle once a week (heats to 60 degrees). I have my legionella cycle run on a Monday morning, and we (there are 2 of us in the house) do not need to re-heat water until Wednesday morning.
      If you have off-peak electricity at a cheaper rate, make sure you program your hot water heating during this time period.