ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Dj Booth for under $200
ฝัง
- เผยแพร่เมื่อ 21 เม.ย. 2020
- Custom Dj booth during this COVID quarantine. And yes, this cost me less than $200 to make ($177 to be exact, all links below). At the same time, I had the "expensive" equipment already.
NEED
$100 pine wood (for straightness)
Home Depot
$10 paint + primer interior white. Go to Home Depot. You will find it for $10 or less (1 gallon). The inexpensive stuff works for this.
www.amazon.com...
$14 aluminum plate for bottom of booth
www.amazon.com...
$3 neutrik power plug
www.amazon.com...
$8 xlr plug (x2) = $16
www.amazon.com...
$22 truss couplers
www.amazon.com...
$10 angle bolts (x4)
www.amazon.com...
$7 rack rails
www.amazon.com...
---about $177 in materials---
Gear you may have. But needed:
$157 truss section .75m (2.47 ft)
www.amazon.com...
$145 global truss steel base. Paint it white.
www.amazon.com...
$35 truss scrim
www.amazon.com...
$23 xlr cables. (x6) cables needed. Controller to mixer. Mics to mixer. Mixer to main out=$70
www.amazon.com...
$100 2u drawer with foam
www.amazon.com...
$210 Yamaha mixer
www.amazon.com...
$112 furman power conditioner. Find it used on offer up/eBay like I did. Save 50%.
www.amazon.com...
$400 shure blx mount rackable (x2).
www.amazon.com...
$13 square
www.amazon.com...
$7 paint roller + handle
www.amazon.com...
$50 sander
www.amazon.com...
$7 spackling paste
www.amazon.com...
$25 jig saw
www.amazon.com...
Clever move to cut the drawer to fit the mics and external mixer. Looks great! Nice work.
Thank you
Looks like you were more productive in quarantine than I was. Real nice.
Thank you
Came out nice.
pretty cool, thinking of making mine of plexiglass. You should buy a white dj skin also.
Well Done!!
Thank you
very clean work!
Cool idea! I like it!
Nice job 👍
Thank you
Wow! Awesome job man.
Thank you
Well done man I like it alot.
Love dj booth ❤️
VERY NICE BRO!!
Thanks.
Nice job bro
Thanks.
Hey brother hope you get to read my message I’m doing it to help . You can customize the size of the scrim I went with those people that fix sizes for suits and I told them about the measurements of my totems and they cut it made it looks perfect for like $15 , trust me brother your set looks really good but the scrim can be customized to the size to fit perfect it’ll give you a better look
Very Nice!!!!!
Thank you
Haha "the chingaderas" comment was great. But awesome job...I'm stealing your idea
Lol thank you
Do it! Level up!!
@@edeevents I just saw your video and I would like the plans as well.
Are you still doing these? If not do you sell the blueprints?
Hey man I'm interested if you could build me one?? how much would you charge
$1200
www.eddjent.com/woodworking-by-ed
Great DJ content Ed. Will you send me the blueprint if you still have it. I'm trying to figure out how you connected the DJ control booth to the truss. Thanks & Respect
are you selling the plans to this?
hello, do you have the plans for your DJ Booth please. thanks in advance
looks heavy how much does it weigh with the controller inside
Can you post a video of the break down and what case do you carry it in
Yea. I will. I made a custom flight case for it too. First time making them.
The chingaderras. Eso mismo
Can you make a video with the final work? Great job!
I’ll try.
So question. How much for shipping and handling?
DDJ-SX3
www.eddjent.com/woodworking-by-ed
It’s $1200 for the booth. Plus $400-500 for shipping.
very nice! are you able to pack it up and move it to a gig with the controller still inside?
Really Great job!! what kind of wood did you use for the top?
Thank you. I used 1/2” MDF for the top.
What Kind of Paint did you use?? Looks great
Simple white paint. Any paint really. Just use a lot of clear coat.
Looks dope.. looks like MDF. How heavy is it?
Yes. The top and bottom is MDF. 1/2” on top and 3/4” on the bottom.
About 70 pounds total with all the gear.
Where are you from? I’ll pay you to make me one
In Cali.
www.eddjent.com/woodworking-by-ed
So how heavy is it?
About 70 pounds with all the gear in it.
sweet man. what's the name of that white vinyl design you have on your laptop ?
Hey Fernando
It’s simply just a sticker made at my local tshirt shop. Make the design at home and they will make a big sticker based on your laptop size. It was like $12 a sticker.
Super travail , pouvez vous m’envoyer des photos de votre dj booth par mail ?
How much would you charge to build another one?
I have the three types built at my house right now. You in southern Cali?
@@edeevents no, North East Florida
@@hectorcalderon1829 I’m on my fourth one already. Shipping one to Missouri In two weeks. I’m selling them for $1000. You pay shipping.
What’s the size of the top?
22” x 43” x 8”
Bro do you sell this set up ???
I do.
www.eddjent.com/woodworking-by-ed
Do you have a blue print or parts list to build?
I think I do. I’ll look for it and sent it to you.
@@edeevents send it my way as well...
@@edeevents Lol. If you're still sending it my friend. I'll take one. Nice work. Appreciation on the upload.
I would love to have this too, plz
Maybe I could grab one too pretty please…
vertical video....